i have put the file into intenal storage ready t flash , so when i do a hard reset the what do i do next , do i press vol up? , or vol down ? , really tried both and still have same rom??
thanks
i have copied DIAMIMG.nbh to internal storage , held down vol enter rese , what do i choose , do i press vol up? or down?
what is a different way of installing a rom and how
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
After i do the last step , i get to a screen like 3 colours , but then when a loading screen comes up how long is it meant to be there
because i get a screen saying loading and that screen never seems to move and it seems like phone i s stuck on that screen?
anyhelp pleaseeeeeeeee?
Often explained,
1. HardSPL your device !
2. Place DIAMIMG.nbh on internal storage root
3. PRESS volume down AND <- button while you do softreset
4. Hold them pressed until it says ... do you want to flash (then follow on screen) mine says press power (the button on top of my diam) to flash
...... so i do and successfull flash
UTFSE !!!
Greets
yes it takes me to a neverending loading screen
that says loading... in blue?
Have you got a Hard SPL installed?
this has to be done using a USB cable and Active sync FIRST!
yes i did that first thing
if you have done Hard SPL correctly then the following procedure will work:
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
then it will check the .nbh file and ur phone
then if it is all ok prompts you to press the power button (one on top the phone) to start flash process
once this is done, it says "Complete" and you can just do a soft reset. (often recommended to do a Hard Reset after a flash)
Related
Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?
kenosis said:
Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?
Click to expand...
Click to collapse
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!
mrm2007 said:
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!
Click to expand...
Click to collapse
Special Thanks. I got it and upgrading now.
Hi everybody,
I look through the threads and I couldn't find a solution to my troubles. So here it is: I just bought a htc touch pro 2 which came with a window mobile 6.1. Before I transferred anything from my old phone, I thought better to do the official upgrade to 6.5 ROM version 1.86.401.0.
I wanted to flash the ROM through a USB cable as described on the HTC site, but after after having done 22% of the work, everything got stuck. And 5' minutes afterward the update windows on the PC disappeared and I had to disconnect the phone!!!
So now I have a beatiful telephone, which cannot boot up. Indeed, it gets stuck in the 4 colors bootloader.
i) I tried to do a factory reset (pressing power, send hang up buttons) to no avail.
ii) I tried to take out the batteries and pull them in again, then switching on the phone holding down the vol down + power up buttons, then reset.
iii) reconnecting the phone back to the PC by usb, I was never able to get a switch from "serial" to "usb"
Nothing is working, if anybody has an idea what I could try next.... I am wondering if it is possible to flash the phone from the SD card. I am really a newbie here.
Thanks
Max
Yea .. same thing happened to me ..
Check Here For Full Info: Click Here
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it)
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Good Luck ! Worked For me !
Thanks for your help and the link to the thread!! I will use your approach next time. Indeed, in the day afterwards I was able to finally flash the phone from the same PC. I did the manipulation, which failed miserably, with a 64 bit Windows 7 RC. Then, I realised I had another version of W7 on the same PC, a 32 bit version this time. Thus, when I tried it with my dying telephone, the "serial" message on its screen switched "magically" to "usb" and I finally could flash the damned mobile! Frankly, I don't know what's wrong with my 64bit W7 if anything.
Cheers
Max
my htc pro2 failed upgrade: any help
WarlockW said:
Yea .. same thing happened to me ..
Check Here For Full Info: Click Here
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it)
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Good Luck ! Worked For me
i tried this option but didn't work, is there any help, the phone can't come up again
it show this Error msg at 0% "BOOTLOADER - FAIL" update terminated
Click to expand...
Click to collapse
larryike said:
i tried this option but didn't work, is there any help, the phone can't come up again
it show this Error msg at 0% "BOOTLOADER - FAIL" update terminated
Click to expand...
Click to collapse
\
Did you try the stock rom from HTC loaded over the usb first?
Information about what unlocker you tried to use, what kind of phone you have, what kind of rom you tried to load would be helpful.
I have registered my account to ask this question. I have been flashing roms since I bought desire a month ago. But this time I flashed the chinese version of MIUI rom from their official website. They didn't even mentioned on their site that this is Chinese and official version of the rom.
My question is, how can I connect my USB cable to connect to the computer and then copy some other rom to my memory card. ( I don't have memory card reader/adapter). I tried to connect it but it's showing charging icon on the status bar, I then tap on that icon and there were some on/off options I tried to change them in both states but the device is still not connecting to the computer in USB mode. I am bit afraid because I am experiencing this strange problem that I haven't found fix on the net.
P.S: Sorry for my English and please reply urgently I can't even use my phone with this chinese version.
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
ser.clansman said:
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
Click to expand...
Click to collapse
I have to connect my phone with pc, so I can put another rom on the sd card and then flash it. Is it possible to do this via recovery? If yes please guide me how do this.
Thanks
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
ser.clansman said:
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
Click to expand...
Click to collapse
Thank you so much, I use the option Mount USB storage and put my rom on the card and I have finally come back to some English rom. Thanks it worked.
Hi.
I have followed the instructions on this thread to root the GT-I9190 but I am stacked on Step 7.
The procedure is as:
Copy the "S4Mini_RootKit_v2.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.4.6-serrano3gxx.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
Click to expand...
Click to collapse
The phone does not boot into recovery mode. I have tried several times to press hold volume up and home buttons immediately after the phone vibrates when re-starting, but the phone just starts normally.
The phone applications cannot access the SD card to save files. When I try to save a file (from Internet or Titanium Backup) it says "No SD card present".
I can access the card from the file explorer and I access to pictures, music, etc. But the applications cannot find the SD card when they have to save a file.
- Should I go to step-8 and run "S4Mini_RootKit_v2.zip" from the SD card?
I will appreciate some help.
Thank You
ps: I am sorry for asking again. I am not receiving answers at the section for developers, so I have decided to ask at this section of Help & Troubleshooting
pingfloid said:
Hi.
I have followed the instructions on this thread to root the GT-I9190 but I am stacked on Step 7.
The phone does not boot into recovery mode. I have tried several times to press hold volume up and home buttons immediately after the phone vibrates when re-starting, but the phone just starts normally.
The phone applications cannot access the SD card to save files. When I try to save a file (from Internet or Titanium Backup) it says "No SD card present".
I can access the card from the file explorer and I access to pictures, music, etc. But the applications cannot find the SD card when they have to save a file.
- Should I go to step-8 and run "S4Mini_RootKit_v2.zip" from the SD card?
I will appreciate some help.
Thank You
ps: I am sorry for asking again. I am not receiving answers at the section for developers, so I have decided to ask at this section of Help & Troubleshooting
Click to expand...
Click to collapse
Switch the phone off, than press power+vol up+menu simultaneously, when the phone vibrate (powering on), let go. If it doesn't enter recovery you not doing it right, there's no other answer to that.
As for phone not reading SD card, what type of SD card is't?
TNCS said:
Switch the phone off, than press power+vol up+menu simultaneously, when the phone vibrate (powering on), let go. If it doesn't enter recovery you not doing it right, there's no other answer to that.
As for phone not reading SD card, what type of SD card is't?
Click to expand...
Click to collapse
Thank you!!
As I understood the instructions, I was pressing power+vol up+menu AFTER the phone vibrates, but you made it clear that it is before.
So simple, but since It is the first time I do this, I didn't want to experiment
pingfloid said:
Thank you!!
As I understood the instructions, I was pressing power+vol up+menu AFTER the phone vibrates, but you made it clear that it is before.
So simple, but since It is the first time I do this, I didn't want to experiment
Click to expand...
Click to collapse
No problem. Not to worry, no harm can be done by trying to enter the recovery mode, either than you may 1. Drain a lot of battery or 2. wipe user data which is like a factory reset.
Please press the 'Thanks' button if I helped in any way.
Hello Frends i took TWRP for s4 mini but now I cannot boot to recovery and also to download mode Please help me.. step by step
My s4 mini restart with logo &doesnt enter recovery mode,pls hlp
HTC 8S dont turn on and someone posted that issue 2 years ago.
I followed this video youtube.com/watch?v=gjtTK2TcnyE with RUU_ACCORD_U_APO_00_HTC_Europe_2.00
1. Copy UEFI_signed.nbh to sdcard
2. Rename UEFI_signed.nbh to RIOUDIAG.nbh
3. Turn the phone off and put sdcard into the phone
4. While holding Volume down + camera buttons press power button
Still got the screen of the bar code, it does not install the RIOUDIAG.nbh file like the video, it goes directly to the bar code
so i try this step with RUU_ACCORD_U_APO_00_HTC_Europe_2.00:
I Turn off my phone completely.
I Hold Power to turn it on, and quicly press volume + and volume - at the same time to enter bar code screen
I Connect my device to PC, the “serial” text changed to “USB”
I Run the ROMUpdateUtility.exe on PC
The phone is detected and it starts to load files
on the computer there is 1%, on the phone there is 1%
but the phone turns off and I get the following message on the computer
” ERROR 296, UPGRADE ONLY, This NBF fil cannot be used for your PHONE, please get newer file.”
same result with RUU_RIO_U_APO_00_HTC_Europe_1.04
Now I followed the same video with RUU_RIO_U_APO_00_HTC_Europe_1.04
1. Copy UEFI_signed.nbh to sdcard
2. Rename UEFI_signed.nbh to RIOUDIAG.nbh
3. Turn the phone off and put sdcard into the phone
4. While holding Volume down + camera buttons press power button
the screen is dead, when i press power button ,the phone vibrate but i have always black screen
when i plug the phone to the PC , the phone is detected like a hard disk 2GB
really need help