help me. - Touch Diamond, MDA Compact IV ROM Development

Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?

kenosis said:
Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?
Click to expand...
Click to collapse
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!

mrm2007 said:
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!
Click to expand...
Click to collapse
Special Thanks. I got it and upgrading now.

Related

Help!!! my Diamond don´t start-I changed the registry

Hi,all
I have a big problem with my Diamond, for mistake i changed the registry:HKEY_CURRENT_USER\MUI\CURLANG\1033 to"3082" wrong!!!
Now, my device don´t start, only i can see "HTC logo" frozen in the display.
I tried to make a softreset it´s nothing and the hard reset don´t works...
Any Idea?
Thank a lot for your help!
try removing the battery and then leave the phone alone for 30 min. Then proceed with HR
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see message on screen
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset
save this info in your computer
Aqrab said:
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see message on screen
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset
save this info in your computer
Click to expand...
Click to collapse
Thank for your post.
i did to troubleshooting for this case, but my device don´t take hard reset function, it´s don´t woks

rom help

i have put the file into intenal storage ready t flash , so when i do a hard reset the what do i do next , do i press vol up? , or vol down ? , really tried both and still have same rom??
thanks
i have copied DIAMIMG.nbh to internal storage , held down vol enter rese , what do i choose , do i press vol up? or down?
what is a different way of installing a rom and how
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
After i do the last step , i get to a screen like 3 colours , but then when a loading screen comes up how long is it meant to be there
because i get a screen saying loading and that screen never seems to move and it seems like phone i s stuck on that screen?
anyhelp pleaseeeeeeeee?
Often explained,
1. HardSPL your device !
2. Place DIAMIMG.nbh on internal storage root
3. PRESS volume down AND <- button while you do softreset
4. Hold them pressed until it says ... do you want to flash (then follow on screen) mine says press power (the button on top of my diam) to flash
...... so i do and successfull flash
UTFSE !!!
Greets
yes it takes me to a neverending loading screen
that says loading... in blue?
Have you got a Hard SPL installed?
this has to be done using a USB cable and Active sync FIRST!
yes i did that first thing
if you have done Hard SPL correctly then the following procedure will work:
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
then it will check the .nbh file and ur phone
then if it is all ok prompts you to press the power button (one on top the phone) to start flash process
once this is done, it says "Complete" and you can just do a soft reset. (often recommended to do a Hard Reset after a flash)

Unable to flash directly from phone

I follow all the instaructions from this tread http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035 but i can't flash i don't see the 3 color screen it goes in the splash screen
try again
press and hold Volume down, press and hold the back <
and then press and hold the red reset button with your stylus for 2 seconds.
then release only the red reset button .
lol, because you don't have three hands, do it like this:
reset (red small button on the back of the device), and after that immediately hold the volume down and back key (<-) this works, i've been flashing from internal storage for a very long time

[Q] How to reset OS??

I was facing some problems with my touch diamond from past few days. So I have installed new ROM 6.5, it was working properly but after next day I found OS is hanged so I restarted windows. But then it is stopped at the beginning only, it cannot able to boot completely. So I have tried hard reset (vol down + action + reset) but it also doesn't work. So I can't able to connect it to laptop through activesync.
Any body have solution on this to reset OS??
Please tell me...
X
Reinstall ROM from Internal storage
Press Vol Down + Back button (Bottom right) + Reset
Keep hold of First two buttons, and only press reset once, keep hold of first two buttons until coloured bootloader screen appears, follow instructions
Hard Reset
Press Vol Down + Middle Circle button + Reset
Keep hold of First two buttons, and only press reset once, keep hold of first two buttons until coloured bootloader screen appears, follow instructions
Re
I have tried Vol Down + Back button (Bottom right) + Reset
but it was showing the screen showing message like 'Trigger USB host...' and after some time it was showing 'Retry Enter USB'
After that I supposed to press vol down + action(circle button) for some time until coloured boot loader screen appears, to enable USB connection. After that I could reinstall the system.
Thanks for the help.
X
SO it is all working now ?

How To Remove The Pattern Code or Password From Samsung Galaxy S4 I9505

If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
mikidan said:
If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
Click to expand...
Click to collapse
Pressing & holding down keys won't make any change my just reboots & reboot's again
tanveer4m said:
Pressing & holding down keys won't make any change my just reboots & reboot's again
Click to expand...
Click to collapse
boot to recovery, that's where it will take you
I'm seriously not trying to be a ****, but that's pretty useless information. Obviously a factory reset will remove the pattern or password, along with everything else. That would be a last-ditch option... when everything else fails, this will, without a doubt work. Also, to boot into recovery just hold power + volume up. No need to hold the home button, stand on your head, and do a split while singing Hotel California just to enter recovery.
Just FYI, by typing "remove pattern unlock android site:forum.xda-developers.com" in Google, it pulls up many various techniques of doing the same thing WITHOUT losing data.
tanveer4m said:
Pressing & holding down keys won't make any change my just reboots & reboot's again
Click to expand...
Click to collapse
My technique to boot into recovery / download mode:
1. Start with device all the way off.
2. Press and hold the volume down or volume up button as desired.
3. THEN Press and hold the power button until the system begins showing signs of life. Samsung logo or whatever. Release power button but keep holding volume button without fail.
4. When you get to recovery or download mode, release volume key.
If that doesn't work, consider you may have a button hardware failure or some serious other fault.
I used to have lots of trouble getting into recovery or download mode, because I tried to press power and volume keys at same time. That resulted in sporadic operation. Doing it as I describe above, starting with volume key, works every time.
Marc
Frankenscript said:
My technique to boot into recovery / download mode:
1. Start with device all the way off.
2. Press and hold the volume down or volume up button as desired.
3. THEN Press and hold the power button until the system begins showing signs of life. Samsung logo or whatever. Release power button but keep holding volume button without fail.
4. When you get to recovery or download mode, release volume key.
If that doesn't work, consider you may have a button hardware failure or some serious other fault.
I used to have lots of trouble getting into recovery or download mode, because I tried to press power and volume keys at same time. That resulted in sporadic operation. Doing it as I describe above, starting with volume key, works every time.
Marc
Click to expand...
Click to collapse
You don't need to hold volume up/down before pressing power, but it doesn't hurt. You can hold the power button until the device vibrates and let off. As soon as you feel the vibration, you can then switch to holding volume up until you see the blue text in the upper-left hand corner that says "Recovery booting." Once you see that blue text you can release the volume key and you will enter recovery mode every single time. Same way with download mode. Basically, as long as you're holding whichever volume button you want when the Galaxy S4 splash screen pops up, you will enter the corresponding mode. Also, there is no real need to start from the device being powered off completely. You can actually use your basic power menu (or advanced, depending on the ROM) and select Reboot/Restart and then hold the correct volume key when the screen powers off; although with an advanced power menu the option to boot to either is obviously both there and foolproof
I have never understood why people make entering download/recovery mode a lot more complicated than it actually is... I've never had trouble getting into download or recovery mode because it's not hard at all.
How to cancel pattern password
I have set a pettern password, and i do remember the pattern but i want to cancel the pattern password, i want to keep my phone lock free. please advise.
Munna_cse
Go to settings, lock screen, none.
No spinning on your head.
Pp.
mikidan said:
If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
Click to expand...
Click to collapse
Or flash CWM, pull the /data/system/gesture.key file and open it with Revskills > Cryptoanalysis > Bruteforce android pattern lock (for pattern) - pull /data/system/password.key and /data/data/com.android.providers.settings/databases/settings.db and open them with Revskills > Cryptoanalysis > Bruteforce android passcode
You will just need to find a Revskills.zip with key latest version is 2.08.6
can u elaborate on this
When you can't boot into recovery you can wipe your phone with the computer using ODIN
If the person can boot the phone into recovery and perform a factory wipe, Odin is not required.

Categories

Resources