I was facing some problems with my touch diamond from past few days. So I have installed new ROM 6.5, it was working properly but after next day I found OS is hanged so I restarted windows. But then it is stopped at the beginning only, it cannot able to boot completely. So I have tried hard reset (vol down + action + reset) but it also doesn't work. So I can't able to connect it to laptop through activesync.
Any body have solution on this to reset OS??
Please tell me...
X
Reinstall ROM from Internal storage
Press Vol Down + Back button (Bottom right) + Reset
Keep hold of First two buttons, and only press reset once, keep hold of first two buttons until coloured bootloader screen appears, follow instructions
Hard Reset
Press Vol Down + Middle Circle button + Reset
Keep hold of First two buttons, and only press reset once, keep hold of first two buttons until coloured bootloader screen appears, follow instructions
Re
I have tried Vol Down + Back button (Bottom right) + Reset
but it was showing the screen showing message like 'Trigger USB host...' and after some time it was showing 'Retry Enter USB'
After that I supposed to press vol down + action(circle button) for some time until coloured boot loader screen appears, to enable USB connection. After that I could reinstall the system.
Thanks for the help.
X
SO it is all working now ?
Related
Hi, just got this O2 orbit, trying to put on touch flo.run that USPL, then it updated something. then treid to update rom but failed!. So tried to put phone in bootmode 'Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen' , but it will not go in boot mode?. The phone just starts normal. why can I not get the phone in boot mode.
thanks (new to this phone)
Bootloader is different on this devive. Hold down two Softkeys ( above Windows Button and OK button ) while pressing reset with stylus. Once text comes on screen, press green call button to HARD RESET.
Hold down the speed dial button, push and release the soft reset, keep the speed dial button held down until the bootloader screen appears.
Shand359 said:
Bootloader is different on this devive. Hold down two Softkeys ( above Windows Button and OK button ) while pressing reset with stylus. Once text comes on screen, press green call button to HARD RESET.
Click to expand...
Click to collapse
Or:
Start - Settings - System - Clear Storage
But that's a Hard Reset, it still won't go into Bootloader.
BootLoader
Press and keepholding voice record button while using stylus to soft reset. this will take you into boot loader mode.
Sorry. My mistake. What i described was a Hard Reset not entering Bootloader. Sorry again m8!!
Thanks, tried both. only had phone 1 week. Its a bit slow.
I follow all the instaructions from this tread http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035 but i can't flash i don't see the 3 color screen it goes in the splash screen
try again
press and hold Volume down, press and hold the back <
and then press and hold the red reset button with your stylus for 2 seconds.
then release only the red reset button .
lol, because you don't have three hands, do it like this:
reset (red small button on the back of the device), and after that immediately hold the volume down and back key (<-) this works, i've been flashing from internal storage for a very long time
Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?
kenosis said:
Hi all...
i have done hard spl for my diamond.
I put "diamimg.nhb" to internal storage and power-off.
I press Vol Down + Power and i see Red, Green, Blue and White colors on screen.
i see "SPL-1.40.OliNex" also. after that, nothing happen on my phone (no upgrading).
what should i do after that?
Click to expand...
Click to collapse
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!
mrm2007 said:
Hi,
Pressing Vol Down + Power is only for checking Hard_SPL Version or flashing device (in case of Flashing Failure) using CustomRUU.
For Flashing from Internal Storage :
0) Copy diamimg.nbh in internal storage.
1) reset your device and within 3~4 seconds push together the Vol_Down + Back buttons (the one on the right above the hangup button) and keep pressed until the boot loader appears .as soon as you see the boot-loader you can release those buttons
2) a very simple gray menu will appear asking you what to do, press the Power Button to perform the ROM/Radio upgrade
3) while the upgrade runs be patient and don't press any button or reset the device , when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device.
4) A Hard Reset is always recommended after flashing a rom.you can perform a hard reset after flash : After reset press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format.
Good Luck!
Click to expand...
Click to collapse
Special Thanks. I got it and upgrading now.
hi
i just received this tab with password only, so the customer want it to unblock the password
i try to find the hard reset combination using volume down (-) button and power it on.
but unfortunately nothing happen and the screen now is black and i can't return it into normal mode
i thought the unit is now in recovery mode..
now the question is how to escape into recovery mode
is this unit need to flash?
thank you....
How to get into the recovery menu for the Dopo M975.
To get to the into recovery menu for the m975:
1: Hold Volume Down & Power for 10 seconds ( screen will go black ).
2: Hold Volume Up, the recovery menu should pop up after 6 to 7 seconds.
From there you will see all your options ( wipe data/factory reset is your third option ) , use Volume Up/Down to move & Power to select.
If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
mikidan said:
If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
Click to expand...
Click to collapse
Pressing & holding down keys won't make any change my just reboots & reboot's again
tanveer4m said:
Pressing & holding down keys won't make any change my just reboots & reboot's again
Click to expand...
Click to collapse
boot to recovery, that's where it will take you
I'm seriously not trying to be a ****, but that's pretty useless information. Obviously a factory reset will remove the pattern or password, along with everything else. That would be a last-ditch option... when everything else fails, this will, without a doubt work. Also, to boot into recovery just hold power + volume up. No need to hold the home button, stand on your head, and do a split while singing Hotel California just to enter recovery.
Just FYI, by typing "remove pattern unlock android site:forum.xda-developers.com" in Google, it pulls up many various techniques of doing the same thing WITHOUT losing data.
tanveer4m said:
Pressing & holding down keys won't make any change my just reboots & reboot's again
Click to expand...
Click to collapse
My technique to boot into recovery / download mode:
1. Start with device all the way off.
2. Press and hold the volume down or volume up button as desired.
3. THEN Press and hold the power button until the system begins showing signs of life. Samsung logo or whatever. Release power button but keep holding volume button without fail.
4. When you get to recovery or download mode, release volume key.
If that doesn't work, consider you may have a button hardware failure or some serious other fault.
I used to have lots of trouble getting into recovery or download mode, because I tried to press power and volume keys at same time. That resulted in sporadic operation. Doing it as I describe above, starting with volume key, works every time.
Marc
Frankenscript said:
My technique to boot into recovery / download mode:
1. Start with device all the way off.
2. Press and hold the volume down or volume up button as desired.
3. THEN Press and hold the power button until the system begins showing signs of life. Samsung logo or whatever. Release power button but keep holding volume button without fail.
4. When you get to recovery or download mode, release volume key.
If that doesn't work, consider you may have a button hardware failure or some serious other fault.
I used to have lots of trouble getting into recovery or download mode, because I tried to press power and volume keys at same time. That resulted in sporadic operation. Doing it as I describe above, starting with volume key, works every time.
Marc
Click to expand...
Click to collapse
You don't need to hold volume up/down before pressing power, but it doesn't hurt. You can hold the power button until the device vibrates and let off. As soon as you feel the vibration, you can then switch to holding volume up until you see the blue text in the upper-left hand corner that says "Recovery booting." Once you see that blue text you can release the volume key and you will enter recovery mode every single time. Same way with download mode. Basically, as long as you're holding whichever volume button you want when the Galaxy S4 splash screen pops up, you will enter the corresponding mode. Also, there is no real need to start from the device being powered off completely. You can actually use your basic power menu (or advanced, depending on the ROM) and select Reboot/Restart and then hold the correct volume key when the screen powers off; although with an advanced power menu the option to boot to either is obviously both there and foolproof
I have never understood why people make entering download/recovery mode a lot more complicated than it actually is... I've never had trouble getting into download or recovery mode because it's not hard at all.
How to cancel pattern password
I have set a pettern password, and i do remember the pattern but i want to cancel the pattern password, i want to keep my phone lock free. please advise.
Munna_cse
Go to settings, lock screen, none.
No spinning on your head.
Pp.
mikidan said:
If you forgot your screen lock combination or password follow these steps.
Warning !All data will be lost!
1.Press together volume up + home button + power button
2.Release your fingers of the phone when Samsung logo appear
3.Choose with volume buutons "wipe data/factory reset" and select it with power button
5.Choose "yes" with volume buttons and select it with power button
6.Wait untiil format is complete
7.Select "reboot"
Click to expand...
Click to collapse
Or flash CWM, pull the /data/system/gesture.key file and open it with Revskills > Cryptoanalysis > Bruteforce android pattern lock (for pattern) - pull /data/system/password.key and /data/data/com.android.providers.settings/databases/settings.db and open them with Revskills > Cryptoanalysis > Bruteforce android passcode
You will just need to find a Revskills.zip with key latest version is 2.08.6
can u elaborate on this
When you can't boot into recovery you can wipe your phone with the computer using ODIN
If the person can boot the phone into recovery and perform a factory wipe, Odin is not required.