Develop Bugs

rom help

i have put the file into intenal storage ready t flash , so when i do a hard reset the what do i do next , do i press vol up? , or vol down ? , really tried both and still have same rom??
thanks

i have copied DIAMIMG.nbh to internal storage , held down vol enter rese , what do i choose , do i press vol up? or down?
what is a different way of installing a rom and how

Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
After i do the last step , i get to a screen like 3 colours , but then when a loading screen comes up how long is it meant to be there
because i get a screen saying loading and that screen never seems to move and it seems like phone i s stuck on that screen?
anyhelp pleaseeeeeeeee?

Often explained,
1. HardSPL your device !
2. Place DIAMIMG.nbh on internal storage root
3. PRESS volume down AND <- button while you do softreset
4. Hold them pressed until it says ... do you want to flash (then follow on screen) mine says press power (the button on top of my diam) to flash
...... so i do and successfull flash
UTFSE !!!
Greets

yes it takes me to a neverending loading screen
that says loading... in blue?

Have you got a Hard SPL installed?
this has to be done using a USB cable and Active sync FIRST!

yes i did that first thing

if you have done Hard SPL correctly then the following procedure will work:
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <----
then it will check the .nbh file and ur phone
then if it is all ok prompts you to press the power button (one on top the phone) to start flash process
once this is done, it says "Complete" and you can just do a soft reset. (often recommended to do a Hard Reset after a flash)

Phone Stuck On SPL and IPL mode

Hi all,
I have a HTC P3300 phone, it was freezing, soi decided to do a hard reset, by pressing the two button and the pwr button - i get the screen where i can see the screen stating that the Phone wil be reset to the manufactures default, and whn i press the send button - there is an error " format Failed" and then the phone boots and i see a gree bar'd line with the :SPL" and the "IPL" numbers displayed on the screen , and then the phone switches off , the phone when plugged into a pwr socket has the charging light "orange" that comes on/off at intervals, i have tried to flash the phone using the flash utility but no luck, i have also tried to press the Rest button with the camera button "still no luck"
- I have tried to replace the phones battery - still nogo,
cold sme one help me on this in a step by step procedure ( and the links if i have to download any file)

[Q] (Can't boot and Can't open Download mode) Can i flash new rom?

Oh no.... my gio is Hard brick
How to fix it
(sorry for my bad english)

Ok. Try to pull your battery out for some minutes. If this isn't working i think the only solution is the way to the service. This can be solved with jtag. I had simillar problem with a friend's galaxy mini and going to service was the only solution.

try this from your computer:
1. Prepare official firmware files for your phone
2. Open Odin and put all the files on it as on this thread but do it only till step 6..
3. Remove battery, sim card, and micro sd from your phone
4. Connect your phone to your computer by USB
5. Press the downloading mode buttons (Volume down + Home + Power)
6. Release home button and insert the battery..but never release the volume down and power button.
7. your phone should be now enter "downloading mode" and you can release volume down and power button.
8. press start on Odin and your phone should be flasing
9. Your phone should be back alive again.
my source: gio lounge kaskus

[Q] I have flashed chinese MIUI Desire_2.4.13 ROM

I have registered my account to ask this question. I have been flashing roms since I bought desire a month ago. But this time I flashed the chinese version of MIUI rom from their official website. They didn't even mentioned on their site that this is Chinese and official version of the rom.
My question is, how can I connect my USB cable to connect to the computer and then copy some other rom to my memory card. ( I don't have memory card reader/adapter). I tried to connect it but it's showing charging icon on the status bar, I then tap on that icon and there were some on/off options I tried to change them in both states but the device is still not connecting to the computer in USB mode. I am bit afraid because I am experiencing this strange problem that I haven't found fix on the net.
P.S: Sorry for my English and please reply urgently I can't even use my phone with this chinese version.

Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?

ser.clansman said:
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
Click to expand...
Click to collapse
I have to connect my phone with pc, so I can put another rom on the sd card and then flash it. Is it possible to do this via recovery? If yes please guide me how do this.
Thanks

Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...

ser.clansman said:
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
Click to expand...
Click to collapse
Thank you so much, I use the option Mount USB storage and put my rom on the card and I have finally come back to some English rom. Thanks it worked.

[Q] htc 8s no boot sad smily

hello everyone
8S my htc not turn on
system lost at demarage I have a sad smily
low battery not charging because I Still sad smilie, so I took off the battery to the load directly
I download the file " RUU_ACCORD_U_APO_00_HTC_Europe_2.00 " and " RUU_RIO_U_APO_00_HTC_Europe_1.04 "
My computer is a core i7 8GB RAM with windows ultimate x64 htc driver installed
I followed this video youtube.com/watch?v=gjtTK2TcnyE with RUU_ACCORD_U_APO_00_HTC_Europe_2.00
1. Copy UEFI_signed.nbh to sdcard
2. Rename UEFI_signed.nbh to RIOUDIAG.nbh
3. Turn the phone off and put sdcard into the phone
4. While holding Volume down + camera buttons press power button
Still got the screen of the bar code, it does not install the RIOUDIAG.nbh file like the video, it goes directly to the bar code
so i try this step with RUU_ACCORD_U_APO_00_HTC_Europe_2.00:
I Turn off my phone completely.
I Hold Power to turn it on, and quicly press volume + and volume - at the same time to enter bar code screen
I Connect my device to PC, the “serial” text changed to “USB”
I Run the ROMUpdateUtility.exe on PC
The phone is detected and it starts to load files
on the computer there is 1%, on the phone there is 1%
but the phone turns off and I get the following message on the computer
” ERROR 296, UPGRADE ONLY, This NBF fil cannot be used for your PHONE, please get newer file.”
same result with RUU_RIO_U_APO_00_HTC_Europe_1.04
Now I followed the same video with RUU_RIO_U_APO_00_HTC_Europe_1.04
1. Copy UEFI_signed.nbh to sdcard
2. Rename UEFI_signed.nbh to RIOUDIAG.nbh
3. Turn the phone off and put sdcard into the phone
4. While holding Volume down + camera buttons press power button
the screen is dead, when i press power button ,the phone vibrate but i have always black screen
when i plug the phone to the PC , the phone is detected like a hard disk 2GB
please help me
Sorry for my English