a problem.. help please - 8525, TyTN, MDA Vario II, JasJam ROM Development

im using shamanixs excellent final rom, but encountering a problem which has started today, when recieving or making phone calls, the person cant hear me and i cant hear them, its only mended (temporarily) by soft resetting, is it a problem with lite roms? (this is my first lite rom) help appreciated.

Did the problem start around the time that you installed something?If so you could try removing the last thing or two you installed if that doesn't work you could try a hard reset or run clear storage, and see if that clears it up (make a backup!), and start from scratch again.
If that doesn't work I would try another rom (probably the stock shipped rom) to see if it's a hardware problem.

Related

End call help!!!!

Dont know why but there is a problem with my phone and i cant figure it out. Most of the time i can dial out , but there are instances where i begin to dial out, and im just waiting, and i try to end call but i cant. The phone does NOT hang or freeze, i can still go through tabs, but if i got to the call page, its still hung uo on that last call i cannot end. Hope this makes sense. Im using Dutty`s Newest rom with 2.03, tried other roms and same turnout. Hope someone can help!
Please provide detail ...
WHen did it last work fine and back step to trace what u did that might have caused a change.
Example:
• flash new rom or radio
• flash system with Hard SPL
Im using HardSpl Olinex 1.4
1.09.25.23 Radio
Dutty V4
I think its happened after my provider gave me free internet or when i went from 1.93 to 2.+ roms.
the only sw i have is tomtom and musicId.
This is really ticking me off
When u flashed your rom, did u do a Hard Reset?
if you didn't hard-reset your phone after flashing a new ROM there tends to be minor bugs..
i just had to hard-reset my phone again after trying on different radios.. it freezes my phone whenever i hit volumn button. After the hard-reset.. everything is fine now

Serious Problem.

I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck

Need some help regarding my Diamond

I recently flashed my diamond with a new rom however sometimes the phone is just freezing and won't work not even turn off!! I need to give it a hard reset to get it to work again. does anyone know what the problem might be??
cheers
Did you use MTTY before flashing?
Here's a link to the dedicated thread:
http://forum.xda-developers.com/showthread.php?t=540290
it will probably solve your problem.
i recently had an issue similar with yours and the only thing that worked for me was to return to stock rom from htc
then everything was smooth again and i'm taking a break from flashing for now

[Q] Please help!!! MIC is breaked after Update...

Hi ll,
I really out of ideas here .
I was running Pays 1.9 Bravesoul ROM without any issues for about 4 months on my unbranded Desire(HBOOT 0.75)!
Today I decided to update to Froyo.
I used Rom Manager to upgrade to OpenDesire 3.03 and Radio 32.43.00.32U_5.09.00.20.
Every thing went well, except that I noticed that the MIC doesn't work at all.
Not when I make or receive a call, Not if I try to Mute/Unmute it, Not if i try to Record sound, or Video or WHATEVER!!! The only way the other side can hear me is trough my BT headset.
So I tried to use the LeeDroid 1.7a ROM but same result. Also tried to use different Radio - 32.42.00.32U_5.09.00.08.
I then Nandroid restore to my 1.9 Pays rom (Wiping Data+Cach+ext), but still doesn't work. I tried different Radios:
32.37.00.32U_4.06.00.16_2
32.36.00.28U_4.06.00.02_2
32.26.00.24U_4.04.00.03_2
same thing...
I finally Unrooed my Desire to v1.15.4 Radio 32.30.00.28U_4.05.00.11 without any luck!
So I'm pretty hopeless Please if someone also have / had this issue, Please share!
Thanks!
sounds to me like it's broken mate
i know it's coincidence that it broke as you changed ROM but if it doesn't work on anything there's no explanation
have you tried a hard reset + clearing caches?
if you have then unroot your phone, put it back to your original RUU for warranty purposes and sent it back for repair
by what do you mean Hard Reset?
I wiped all data, I've changed roms.
Currently It's unrooted...
Is it possible for the Radio update to do this? (all the updates went without a hitch)
Or maybe the OpenDesire ROM (I see that v3.03 is removed, do you know why?) did this?
There is no way it a coincidence. I making phone calls all the time, The update took me about 15 min, after which I tried the Video camera and noticed there was no sound...
Thanks!
well, I noticed that the mic works, but extremely week! I really need to shout in order to hear a whisper... I do this in recording...
I'm starting to believe that maybe it's the mimbrein (Or the piezzo) that is ruined inside the mic...
Is it possible to control the gain in software? (Is there still a chance that the S.W upgrade caused this?)

Replacing current miui rom with the same stock rom: STRANGE ISSUE

Hi everyone,
I have an unmodified Xiaomi 10T lite MIUI Global 13.0.8.0 (SJSEUXM) Stable stock rom. The problem is that it's developed a very strange issue where ALL incoming calls show as UNKNOWN. Just to be clear, the numbers coming through are not being withheld.
Here's the even more strange issue - A few days ago, I decided to factory reset it and when it loaded up for the very first time and the setup goes through standard questions such as asking for WIFI, google apps info - If I don't complete these standard details and get someone to call me, then the incoming numbers are coming through fine, but as soon as I continue the setup, entering my WIFI, google login/apps info, it ends up back with the same issue of incoming numbers showing as unknown. I tried to factory reset it several times to be sure it's not a one-off issue, but same problem again and again. To be 100% sure that it was nothing to do with the simcard or my way of setting up, I used a different backup phone and setup everything on there just fine without any issues at all.
This has led me to believe that there is something wrong or corrupt with the rom and I believe a reflash should resolve this issue.
So I have the following question:-
Is it possible wipe out any cache/data of the current rom that will clear everything?
If the answer to the above is no, how can I flash the current stock rom with another copy of the latest stock rom?.
If I have to flash another rom, how I can do this and would this require the bootloader to be unlocked?
Thanks very much for all your help.
wowandroid
Sorry, I've not had a reply, so I'm BUMPING this thread.
Thanks

Categories

Resources