Related
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Sprite?
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
ruffruff said:
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Click to expand...
Click to collapse
Yes i had same problems. imo the 1.93 isnt a stable rom(yet) so im back with 1.37.456.2 this one is just perfect,very stable,less memory leakage.
Well, the problem is still on going. I can't flash my phone anymore for some reason, even though I've tried both, unsigned and signed Hard-SPL, which both of them flash fine. However, the phone gives me error [276] update error. So not sure what exactly is going on here.
Also, no, didn't sprite backup, phone's just being retarded, mobilecityonline will repair it, but it will take almost 4-6weeks, I cannot wait that long. What else should i try?
Okay, nope not fixed... Flashed it with 1.37, connected to the network for a few seconds, dialed somebody and no ring or anything, but when i called my phone i could hear my own voice. So I guess i have to send it in for repair. Damn.
berlinberlin said:
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
Click to expand...
Click to collapse
Could you please detail? I've flashed 1.93.xxx just in the day it appeared on the site and after flashing, I've restored the backup made with Sprite Backup to preserve the settings and so on. I wasn't worried about the contacts/calendar since I have them in Outlook, but I didn't want to start all over with settings, install programs and so. I've made the restore in "upgrade mode", restoring also the databases. The result was that I got a verry strange TF3D, displaying "Home" between the operator name and date, and strange behaviour. I've seen also that the animations were taken out so I've flashed back 1.37.xxx.3. Could be any problems generated by the restore operation? Should I use a different restore type (eventually not selecting "restore databases")?
I have had no problem with the new 1.93xx rom.
Touch FLO 3d is quicker (probably because the animation is disabled)..
and the battery life is about 20% better
Radio ROM Anyone
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
mhbr12742 said:
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
Click to expand...
Click to collapse
I am on 05 and has no problem ( have been using it for a day now)
I don't know, but If i plug the diamond into my adapter, the network suddenly works and I can actually make calls and everything's fine and dandy, but just on the battery, I can't call anyone, and if I pull out the adapter when the phone gets a signal, the signal stays but again, can't call anyone because i can't hear anything.
It's an awkward problem. I'm not sure if it's my battery or something. So I'm getting another battery off ebay since they don't sell HTC Touch Diamonds in the U.S. yet.
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
adwinp said:
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
Click to expand...
Click to collapse
Yes, me I had same problem twice - freezes on PIN input screen, second problem with this release is that sometimes PIN screen doesn't appear. Now I'm back on 1.37 and everything seems to be ok
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
THe Problem you've encountered:
1. Random auto reboot
2. Random freeze
3. etc.
It's sounds familiar to me. Well it's maybe have to do with SPL just like the Kaisers do.Well, I said maybe... So, what we did to our Kaiser before is flashing the HardSPL which has the same version number as the ROM flashed. So, if you're using ROM 1.93 then the HardSPL should be flashed is Olinex HardSPL 1.93 or you can try one by one of the developed HardSPL existed in this forum. My saying is, go with HardSPL 1.93 and see what happen. If it's still no go then it must have to do with the ROM itself.
Just my 2cents.
mda4 the problem is only getting worse, I'm from the 1.73 t-mobile version went to 1.93 and is now with swifb7.5 however
crashes every day (useful in conversations and your alarm clock to expire)
often with a soft reset after installation problems with startup touchflo3d and often error manila.exe below uberhoubt as he is already so far
hard reset is also often already halfway down.
In short ideal device to send back to my old mda3 again to use
But is it possible to go back to the original 1.73 Tmobile and where is it located?
Use Search
marz01 said:
mda4 the problem is only getting worse, I'm from the 1.73 t-mobile version went to 1.93 and is now with swifb7.5 however
crashes every day (useful in conversations and your alarm clock to expire)
often with a soft reset after installation problems with startup touchflo3d and often error manila.exe below uberhoubt as he is already so far
hard reset is also often already halfway down.
In short ideal device to send back to my old mda3 again to use
But is it possible to go back to the original 1.73 Tmobile and where is it located?
Click to expand...
Click to collapse
Hi there,
A simple search through the few posts below yours would have lead to here
http://forum.xda-developers.com/showthread.php?t=435826
However, instead of just giving up, why not try to find out why your device is behaving as it is..?
With a little reading, I'm beginning to get used to the Diamond and it's litte needs. Mine's running very well on a slightly older ROM from one of the developers on here.
I hope this helps answer your needs..?
Cheers,
thx for the answer,
I have tried my mda4 for a few months now but is getting every day worse and worse.
I have tried serveral roms now.
I don't know what else to do besides then sent the mda4 back.
I will try this rom to sent it back
http://forum.xda-developers.com/showthread.php?p=2600096
have you tried changing to a different Hard SPL. These can cause problems.
tried the HardSPL-1.24 and the Unsigned-Hard-SPL-Diamond-OliNex
I have downloaded the RUU_Victor_TMO_NLD_1.37.114.3_Signed_Diamond_52.26a.25.09_Radio_1.00.25.03.nbh
How do i start this file?
i have put the t-mobile file in the 1.24 map.
But the radio stay on 1002505?
rom is now 1371143.nld and till now no problems
dear friends
I am facing a strange problem on my diamond.
After flashing any ROM (whichever it may be) the loading of cabs etc takes place successfully.
But, after few minutes/hours the contents of strat/program are gone. and no program functions. I have flashed re-flashed and reflashed. cannot get over this strange proble.
Can any body guide me what wrong is happening with my diamond???
PS: I have hard SPL 1.40 olinex on my device.
Problem Solved -->http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22 (Thanks cmonex)
c_shekhar:
I have a similar problem. I have had no issues flashing in the past and am very familiar with the procedure. The other day however I noticed a problem where by some of my apps would "disappear".. odd. Also after some time my phone would hard reset instead of soft reset, at first I put this down the ROM as I have had this before with udk's ROMs (no disrespect intended!) and had tried his topaz ROM. It seems to have got to the point now that once a few hours have passed my phone will lock up and then when I reset, it just hangs at the "touch Diamond" screen and I have to hard reset.
I have tried reflashing Radio, Hard SPL, OS.. I have also tried installing my apps one by one and soft reseting after each install. just whenI think it is working it will freeze again.
I have tried flashing different HARD SPL's but it always completes but when I go into boot loader it still says OLINEX 1.40.
What was the last ROM you flashed before you started noticing the issue? The last two I tried where udk syrius topaz and DIB 1.33.
I wandered if it was something to do with the data on my internal storage???
Going to try a hard reset and format movinand next to see what that does.
P.S: yours was the last ROM I used for my Polaris, it was awesome!!
I tried uDK's topaz based latest ROM and after that it started givind problem.
many a times when I prick for soft reset it hard resets the device. I have hard resetted my device several times but it does not set the problem right.Huhhh
Thanks for liking my Polaris ROM..
any headway found by you pl share.....I had borrowed somebody's Diamond and it is F*##ed up.
Same problem here
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
I new I wouldn't be the only one!!
I have just hard reset and formatted movinand AND re-downloaded all my apps so for now nothing will be going back on my internal storage that was on before.
I'll post any updates.
I have the same problem with the Morna. Flashed, reflashed, soft & hard reset.. nothing solved. Every about 24hour the TF3D won't start, the SMS&Emails folders are empty, no contacts and on desktop an error on file BOOT.MSC (can't find associated program to open that)...
After 3 days, I have flashed the Touch with the TIR11 and no one problem. I don't know if the problem is of the rom or else...
Sounds like a virus...
never encounter this problem,but some of my friends does.neither do I know why
offtopic: Are you working on a Diamond rom? I really loved (in fact I'm still using it) your 1.60.21014bCS on my polaris... I think it will be permanent... Have you thinked of making a M2D rom for Diamond ?
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
garymeg said:
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
Click to expand...
Click to collapse
Thanks for the info, i'll give that a go. Makes sense. Will have to wait till tomorrow so i'll have to put up with a crippled phone till then!!
I posted about this issue a couple of days ago,I had all the symptoms described.
After using the clear storage option on my diamond,clearing the phone and internal storage then flashing a new rom,the problem seems to be resolved.
I also experienced similar issues yesterday and for the first time ever, during the use of a udK rom.
Update
Grumps said:
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
Click to expand...
Click to collapse
Update : ITs 17 hours later and still going fine. So maybe the reflashing of the stock rom resolved it. I must say the stock rom i flashed is huge. its over 110Mb so maybe it cleaned out all the jazz. Or maybe when i reformatted the NAND it resolved the problem. I dont know. I also did a softreset about 50 times during the night removing the battery every now and then and its still ok. Ill Update again as soon as something Happens
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Im Going to
sakara said:
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Click to expand...
Click to collapse
Ill try another rom tonite probably morn 1.8 or wm 6.5 beta 3. and see what happens
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
goRt said:
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
Click to expand...
Click to collapse
Simply running clear Storage didnot solve my pro...
superpc said:
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
Click to expand...
Click to collapse
Can you kindly write more details?
Is HK 2.03 stock ROM?
Which hardSPL did you have on your device before flashing the HK 2.03?
etc...
Stability Restored
Got mine stable again by following post #10.
Flashed stock 1.93 rom then flashed stock 1.93 spl.
Now back with oli 1.93 hspl and pda corners v3 rom.
hi,
i have been experiencing a problem with my diamond for the last couple of weeks. i lose the alignment on my screen and when i start moving the touch flu taps the icons are shaking and not moving as i want!
is it something related to ROM, SPL or radio?
i keep formating, changing cooked Roms, lastely i gone back to the offecial rom but the problem still comes. It is always the case that when the device starts after formating i have to keep alignming the screen up to 10 times or more!
can anyone help please?
join the club....
http://forum.xda-developers.com/showthread.php?p=3892993
People all you tryings are ilusions, this kind of problem nothing can't resolve, with trying of software solutions, cause i tried everythings possible to resolve this problem!
I tried, all versions of SPL, signed-olinex, unisgned - olinex, stock SPL, this means all versions from 1.34 to 1.93, and again, and again same problem...
Phone works 3-4 hours ok, and again same... I think this problem occured when i installed IGO8 app for GPS, and start to use this app, i felt phone start to warm up, and often when i used IGO8, it was very hot, something like overheating of computer's component, MB, CPU, etc..
After 1 month, it started to not respoding touch screen, and i couldn't fast align screen!
Then i tried manny cooked roms, one of the best, Cloudy1.0, Shaks4.2, Duty, etc.. And nothing, i go back to 1.93 , 2.03 STOCK roms, and notging ...
And at the end, i tried with formating rom, with MTTY tool, it passed ok, but nothing, after formating , again, and again same...
I spoke with people from HTC support, but they couldn't tell me nothing new, what i didn't try!
This is i think more hardware problem, touch screen problem when phone start to warm up, touch screen has a problem, same is when i go out, and expose phone directly to the sunny, touch screen start to freeze!
And i decide to send phone in service for repairing, cause phone has 2 years warranty, i hope they will give me new one, like some people wrote here...
I hope they will not discover , that i used HSPL olinex, and my problem is i didn't remember what was stock rom on my phone, when is buyed, stock rom was 1.93, but SPL i forgot, today i added 1.37 STOCK SPL, and today i send my phone to service! And now i have to wait...
Greetings and good luck all you!
I'm sorry for my bad english, cause it's not my native language...
p.s.
You can try with MTTY tool, to resolve that problem ,before sending phone, you can find MTTY tool, in thread "strange problem" just write "strange problem" in search, and follow instructions from that thread, some people succeeded to resolve that problem, with that tool, then you can try... I had not lucky... Before trying that, go back to STOCK rom , and STOCK SPL 1.93...
I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck