Hi everyone,
I have an unmodified Xiaomi 10T lite MIUI Global 13.0.8.0 (SJSEUXM) Stable stock rom. The problem is that it's developed a very strange issue where ALL incoming calls show as UNKNOWN. Just to be clear, the numbers coming through are not being withheld.
Here's the even more strange issue - A few days ago, I decided to factory reset it and when it loaded up for the very first time and the setup goes through standard questions such as asking for WIFI, google apps info - If I don't complete these standard details and get someone to call me, then the incoming numbers are coming through fine, but as soon as I continue the setup, entering my WIFI, google login/apps info, it ends up back with the same issue of incoming numbers showing as unknown. I tried to factory reset it several times to be sure it's not a one-off issue, but same problem again and again. To be 100% sure that it was nothing to do with the simcard or my way of setting up, I used a different backup phone and setup everything on there just fine without any issues at all.
This has led me to believe that there is something wrong or corrupt with the rom and I believe a reflash should resolve this issue.
So I have the following question:-
Is it possible wipe out any cache/data of the current rom that will clear everything?
If the answer to the above is no, how can I flash the current stock rom with another copy of the latest stock rom?.
If I have to flash another rom, how I can do this and would this require the bootloader to be unlocked?
Thanks very much for all your help.
wowandroid
Sorry, I've not had a reply, so I'm BUMPING this thread.
Thanks
Related
I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck
Hi,
I have a big problem with AOSP 4.0.3. When I flash a ROM with this build, my data connection always get lost/cut, when I switch the screen off. In this time it is not possible to call me or to send me a massage. When wifi is activated, internet data works, but of course calls and massages not!
I really tried all RADIOs. I flashed them via fastboot and CWM. I also tries different bootloaders, don´t no really why.
I completely set my phone back with a stock google img and locked my bootloader and repeated the whole process. But when I flash a ROM with 4.0.3 base, the same problem appears.
When using AOSP 4.0.2 based ROMs everything works fine!
I have no idea what goes wrong, or what to do to fix it. I think the only option is to wait until Google releases an official update.
Has anyone the same problem her? Or does anyone have an explanation?
Thanks.
I'm currently running on Wicked 9.1
I figured it had something to do with the baseband firmware, so I used Odin and flashed the M919UVUMK2 modem.bin, did a full data wipe & factory reset. Re installed it, found I had a problem with SuperUser, so after poking and prodding the phone is looking to be everything it needs to. I ran RootChecker and it passed, and looked at the baseband version which says M919UVUMK2.
Is there any information anyone can provide as to why my SMS is a little screwy? We're takling, 5 texts come in at once from the other person when I ask them what's up, like their messages don't go through until I send something first. I even tested it with my own phone number. Currently switching to Infamous 4.4 v3 to see if issues persist.
I've done a lot of digging through the forum and can't find an answer, so forgive me if this is an already-answered question.
I have a T-mobile S4 with a camera stuck on the classic "updating camera firmware" error message with black screen. If I open Snapchat the front facing camera will work, but with a slight delay in projection.
Here's the thing...this has happened on two separate phones now and on both of them it happened about 48 hours after I signed into the phone with my google account. Is it possible there is some kind of malware attached to my google account?
In the newest phone I have done a clean full wipe using TWRP, then Odin-flashed a full firmware package I found here on xda (recovery, OS, modem, kernel). Cache wipe and factory reset immediately after rebooting from Odin mode. Still have problem.
Have switched out known good cameras from other phones, and the phone I'm working on was functioning perfectly until I signed into it with my account. Totally stumped here, and really need some assistance.
Phone is:
M919 logic board in I337 body
Kitkat 4.4.4
Baseband: M919UVUFNH7
Kernel: 3.4.9-6281449, [email protected] #1
Build: KTU84P.M919UVUFOK3
Security software version: MDF v1.0 release 3, VPN v1.4 release 2
If anybody's got some ideas, please let me know!
Ok, no answers yet but plenty of views, so either this is an extremely rare issue that no one knows a solution for, or it's a ridiculously stupid question that everyone knows the answer to. I'm going to try and keep a log of what I'm doing with this phone in case any other rookies need assistance in the future.
So far I've flashed three different versions of stock Kitkat onto the phone....OH3, OK3 and NH7. When I flash OK3 my build number doesn't match my baseband (baseband reads NH7)...not sure what's going on there. Also, if I flash OK3 I lose my wifi....do not have this problem with other versions of firmware. Each flash is done after a full clean wipe with TWRP.
I found a thread that mentions an almost identical camera issue being caused on an M919 that was flashed with Nottache Xposed framework for AT&T phones. The OP said they could fix the issue by wiping the framework off the phone. Since my M919 motherboard is installed in an I337 body, I'm wondering if this is something related to a compatibility issue between T-Mobile and AT&T components. Best lead I've got so far.
Two posts have mentioned a fix. One says he opened Google Edition Camera Photosphere and his problem went away. He was running a different machine than mine so I haven't tried this yet, but I'm doubtful. The other user said they have only been able to solve the cam issue by installing a stock modded kernel by @jovy23. All the links I've found to this kernel are dead now, so no dice there.
I'm gonna put my M919 motherboard into an M919 body, wipe and flash stock rom again and see if somehow that does anything.
As a side note, I started getting "SIM not inserted" errors just before I began flashing different roms, and since the initial flash I've lost my SIM completely. So now I've got no camera, no SIM card being read, and sometimes losing wifi. I need this phone for work, so this is kind of sh*tty.
You cant downgrade once youve updated to OK3. The order would have to have been NH7, OH3 then OK3. It seems like mabey its not flashing correctly. Try a different odin program 3.04 3.07 3.09 are good ones. Flash it twice, untick auto reboot and manually power off and back into download mode and flash again. Dont use adv reboot menu to boot into download or it may not flash correctly. If that doesnt work I'm not sure what else to try. Good Luck
Ok, latest update for future readers...
It seems that lordodin912 is right when he says that flashing to OK3 means you can't flash backwards to a previous baseband/build. I hadn't seen that info anywhere so I didn't know about it. I'm not sure how to go about finding this kind of info on the forum but it would have been nice to know ahead of time. Anyhow...thank you for that information lordodin.
Here's where I'm at now:
-I was originally on NH7 with the camera error and sim card error. Flashed NH7 full stock after doing a full wipe and still had problems.
-Flashed OK3 full stock after full wipe and still had the problems, and also lost wifi capabilites (as in the phone wouldn't turn on wifi at all). At this point the baseband read as NH7 but the build read as OK3. I don't know why.
-Tried flashing OH3 after that (didn't know any better) and it wouldn't take. At this point wifi capabilites returned but still no cam and not reading sim card.
-Flashed OK3 again and wifi returned but still no cam and no sim. A couple hours later I powered the phone off and then back on, and Samsung then notified me of OTA updates. This update notification hadn't appeared before I manually rebooted the phone. I took the updates and now have wifi, sim card is being read, and my camera appears to be functioning properly as well. About 20 minutes or so after the updates are applied, the sim card error returned and told me to restart the phone. I did so and now the phone is reading the sim card again.
Right now my best guess is that when I was on NH7 I had accidentally made some app and update settings changes that prevented me from receiving some of the important OTA updates connected to camera and sim functioning, and this caused incompatibility between certain parts of the firmware that had been updated and others that had not. Trying to flash OH3 failed to solve the issue because I had already flashed OK3 before that and you can't go backwards from OK3. I don't know why the initial OK3 flash failed to fix anything, but I'm guessing the flash just didn't take as well as I thought it did. Flashing OK3 twice in a row seems to have done the trick, I presume because it reset and updated everything so that all firmware was compatible with itself.
I don't know how this could have happened (I try to be very careful about what I freeze and uninstall), but it's the most likely culprit because after flashing the latest firmware manually (twice) and allowing OTA updates my phone returns to proper function. Why OK3 didn't work correctly at first is beyond me....I don't see why it should have taken a few hours or a second reboot for OK3 to begin offering updates but whatever.
I'm doubtful that the camera will continue to work after the next 48 hours, but we'll see. I'll report back in with what happens after a few days go by.
Leaving an update here as I said I would.
For two months the phone has been functioning properly. Camera, sim and wifi have all been good. About one week ago my camera started acting glitchy again and then stopped working. The problem is the same as before- upon opening camera app the screen is black with a message saying "updating camera firmware", then nothing happens. This occurred around the same time I started using google hangouts frequently...don't know if that is related to the issue or not.
Yesterday the phone began showing the error message about sim card not being read, and then today it stopped reading the card altogether.
I repeated the same procedure that seemed to fix these problems two months ago and it hasn't done the trick. Full clean wipe of phone using TWRP, then installation of Chainfire's Autoroot, then flashed OK3 stock firmware twice with battery pulls between installations. Factory reset immediately after install of stock ROM. When connecting to wifi, no OTA updates appear. Camera not functioning, sim card not being read.
Phone shows baseband and build number are matching. I have no ****ing idea what the problem is with this phone. Beyond frustrated.
Anyhow, I'll keep updates going as long as I am working with this thing, maybe it'll help someone later. Anyone knows anything that could help, feel free to chime in.
works fine during setup then vanishes and the wifi button doesn't do anything afterwards. is it hardware or software related?
weird thing i noticed is that any wifi related setting, will make the settings crash and not respond...
miui global 12.5.8 stable, Android version: 11 RKQ1.200826.002, security update: 2002-01-01
dunno how to explain this, but this is what it looks like when I try to do anything in the settings (google drive video)
I have also looked at this thread where it seems similar to my problem, but could not find a solution.
MIUI 12.5 wifi issues
Hi, today I received the EU update to MIUI 12.5 - 12.5.1.0(RFAEUXM) . However, now my Mi 9 can't connect to wireless networks. I already tried restore the network defaults and then the factory reset without success. Any ideas? The behavior is - I...
forum.xda-developers.com
edit: seems like i have to unlock the bootloader to install a different rom, will update in a week
Sounds like a major issue , after watching the video, 2 things I would try remove sim reboot then try, of still fails the ROM must be corrupt , I would reinstall/flash sounds like you tried a factory reset so thats what I would do
thank you for your response. I did remove the sim and factory reset but no change. Can I reeinstall without having the phone unlocked? or is that only possible with an unlocked phone and the fastboot thing?
edit: found out how to local update rom, going to that and see how it goes.
edit2: installed a new rom but the issue still persist.
21sep said:
thank you for your response. I did remove the sim and factory reset but no change. Can I reeinstall without having the phone unlocked? or is that only possible with an unlocked phone and the fastboot thing?
edit: found out how to local update rom, going to that and see how it goes.
edit2: installed a new rom but the issue still persist.
Click to expand...
Click to collapse
you meant to say you just did a update? you will need unlocked bootloader I do believe but not positive if your going from stock to stock
I installed MIUI 13.0.3 with this method https://c.mi.com/oc/miuidownload/detail?guide=1 but the same problem with the WIFI persist. If it was an software issue it should have fixed it right? so I'm thinking that it might be a hardware issue instead.
21sep said:
I installed MIUI 13.0.3 with this method https://c.mi.com/oc/miuidownload/detail?guide=1 but the same problem with the WIFI persist. If it was an software issue it should have fixed it right? so I'm thinking that it might be a hardware issue instead.
Click to expand...
Click to collapse
Did you mess up with any wifi or persist thingy?
update: I unlocked the phone and installed different rom versions with MiFlash.
I installed everything step by step following this guide for installing via fastboot https://c.mi.com/thread-1857937-1-0.html.
alioth_global_images_V13.0.2.0.SKHMIXM_20220314.0000.00_12.0_global: same problem
alioth_eea_global_images_V12.5.8.0.RKHEUXM_20220210.0000.00_11.0_eea: put WiFi settings on static
worked long enough to fully setup and install some apps than it went full retard. (longest working wifi connection yet)
after a second restart, the wifi is compeltly gone now.
alioth_global_images_V12.5.6.0.RKHMIXM_20220210.0000.00_11.0_global: WiFi didn't work at all
alioth_eea_global_images_V12.5.3.0.RKHEUXM_20210706.0000.00_11.0_eea: WiFi worked for 2 minutes
I don't think i have any more roms to test out so maybe i will try a custom rom xd
try with custom roms