I recently flashed my diamond with a new rom however sometimes the phone is just freezing and won't work not even turn off!! I need to give it a hard reset to get it to work again. does anyone know what the problem might be??
cheers
Did you use MTTY before flashing?
Here's a link to the dedicated thread:
http://forum.xda-developers.com/showthread.php?t=540290
it will probably solve your problem.
i recently had an issue similar with yours and the only thing that worked for me was to return to stock rom from htc
then everything was smooth again and i'm taking a break from flashing for now
Related
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Maybe perform the hardSPL again?
Reform the battery for a minute. After this hard reset your device a few times.
If this doens't fix the problem use your original ROM and send the device back for repair.
Would be my solution
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
TerianSilva said:
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
Click to expand...
Click to collapse
Sounds bad
I'm trying an updated radio rom at the moment, we'll see if it hangs today...
mikkelnl said:
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Click to expand...
Click to collapse
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Swiftblade said:
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Click to expand...
Click to collapse
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
mikkelnl said:
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
Click to expand...
Click to collapse
Hi mikkelnl.. It's really worth a try. the description on the thread is of course vague. It is actually to deal with some discrepancy issues between SPL and the device's specification.
Doing a HardSPL will not affect your rom but it will hard reset it so you get a fresh clean rom. Do perform a backup before you do a HardSPL though. My best bet is 1.37 OliNex HardSPL Unsigned.. Cheerz
Edited: If this HardSPLs can't solve your problems then it might be a hardware issue that you are facing...
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
mikkelnl said:
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
Click to expand...
Click to collapse
Hope it works out for you bro... Good Luck!
hi,
i have been experiencing a problem with my diamond for the last couple of weeks. i lose the alignment on my screen and when i start moving the touch flu taps the icons are shaking and not moving as i want!
is it something related to ROM, SPL or radio?
i keep formating, changing cooked Roms, lastely i gone back to the offecial rom but the problem still comes. It is always the case that when the device starts after formating i have to keep alignming the screen up to 10 times or more!
can anyone help please?
join the club....
http://forum.xda-developers.com/showthread.php?p=3892993
People all you tryings are ilusions, this kind of problem nothing can't resolve, with trying of software solutions, cause i tried everythings possible to resolve this problem!
I tried, all versions of SPL, signed-olinex, unisgned - olinex, stock SPL, this means all versions from 1.34 to 1.93, and again, and again same problem...
Phone works 3-4 hours ok, and again same... I think this problem occured when i installed IGO8 app for GPS, and start to use this app, i felt phone start to warm up, and often when i used IGO8, it was very hot, something like overheating of computer's component, MB, CPU, etc..
After 1 month, it started to not respoding touch screen, and i couldn't fast align screen!
Then i tried manny cooked roms, one of the best, Cloudy1.0, Shaks4.2, Duty, etc.. And nothing, i go back to 1.93 , 2.03 STOCK roms, and notging ...
And at the end, i tried with formating rom, with MTTY tool, it passed ok, but nothing, after formating , again, and again same...
I spoke with people from HTC support, but they couldn't tell me nothing new, what i didn't try!
This is i think more hardware problem, touch screen problem when phone start to warm up, touch screen has a problem, same is when i go out, and expose phone directly to the sunny, touch screen start to freeze!
And i decide to send phone in service for repairing, cause phone has 2 years warranty, i hope they will give me new one, like some people wrote here...
I hope they will not discover , that i used HSPL olinex, and my problem is i didn't remember what was stock rom on my phone, when is buyed, stock rom was 1.93, but SPL i forgot, today i added 1.37 STOCK SPL, and today i send my phone to service! And now i have to wait...
Greetings and good luck all you!
I'm sorry for my bad english, cause it's not my native language...
p.s.
You can try with MTTY tool, to resolve that problem ,before sending phone, you can find MTTY tool, in thread "strange problem" just write "strange problem" in search, and follow instructions from that thread, some people succeeded to resolve that problem, with that tool, then you can try... I had not lucky... Before trying that, go back to STOCK rom , and STOCK SPL 1.93...
I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck
So everything on my phone works fine but when i lock my phone then i check it again, the time doesnt change. So i unlock it and check and its the correct time. I then lock it again and its still the incorrect time. Is there anyway to fix this?
thanks
no one knows?
i haven't encountered that problem...what are you running...???
i am running the 6.5 rom from t-mobile. everything is stock
Now you know the problem.....
i ran 6.5 stock for about a week...too buggy and slow for me...i went back to 6.1 stock...smooth sailing for me...unless the tp2 can be overclocked, i'd don't the stock 6.5 is very palatable...
so youre saying i should flash a rom so it wouldnt have that problem? or should i just upgrade to a HD2?
while I highly reccomend that you flash a rom since the benefits are many, if you do not feel comfortable doing so just yet, you can do a hars reset and see if that fixes your problem. just remenber to back up your programs 1st. best of luck.
hey guys looking for a little direction..
so where else would i go!
i finally got the girlfriend to upgrade her htc imagio rom.
first tried 3 different nrgz roms and then the project orange rom. i get the same problem
flashed fine laoded fine
ive narrowed the problem down to something with sense 2.5 ( im running project orange slim os 21895 with sense 2.5.2012)
the home screen freezes if i disable sense life is good. enable sense and the lock screen hangs the home screen freezes and i have to reset
im looking for a fix or something
i cant seem to find anyone else with this problem. am i blind
is it the phone? a little help would be great thanks guys
by the way is it possible there is something wrong with the phone itself? it did NOT have any trouble before the rom flash
Are you installing anything post flash? If so, re-flash, don't install/restore anything and test. If everything works, then install each cab one at a time and test. This will help you isolate the problem.
PS: If you want to try a different ROM, click my sig
i will be trying your rom !!! as for installing cabs and such.. nope havent installed anything yet cause we have been runnning into this problem after the first couple hours
that being said my guess is either there is a problem with 2.5 sense and the imagio or the phone may have a problem
i find it hard to believe that 3 nrgz roms and an other rom all have the same problem
but ill try yours and see if the problem goes away