it comes up with usb device not recongnised and that the device might have malfuntioned
only had it 3 days did a format by holding the 2 keys then pressing the reset button now it wont connect, what have i done???
ive tryed different pc`s tryed removing the unknown device but nothing
Try to de-select the Option "Enable advanced network functionality" (remove the tick) which can be found in Start-Settings-System-USB to PC.
Robert
tryed that mate
im stumped cant even connect through bluetooth, but bluetooth file transfers work with bluesolie?
could my rom be currupt?
I have the same problem. After Hard reset my Orbit won't sync with PC. Is possible Rom is broken etc? I tried Sync with 3 computers :/
Can I upgrade/change ROM with bluetooth Sync?
For those of you who are using one PC, try deleting the partnership in ActiveSync or WMC & ensuring the LAC is set to enabled
Related
Hi, I search everywhere in the net to resolve my problem.
About 2 months ago, I've lost option connect via bluetooth.
Till 2 weeks ago I've could synchronize my pocket only via USB.
Now I can't synchronize via USB too, because my USB port was broken (problem with motherboard.
How to restore option connect via bluetooth without hard-reset?
PLEASE HELP
Make a Bluetooth pairing between you PPC and PC (Comm Manager -> Settings -> Bluetooth -> Add new device), and after pairing, check the mark near ActiveSync connection.
Then go to Active Sync in Programs, and in Menu select "connect via Bluetooth".
thanks, but I pairing PPC with PC many times, nothing change.
I think, only HR help me.
maybe exist another way to solve this problem....
My friend have Trinity (P3600), and in his PDA this option exist without pairing any PC.
PLEASE HELP!
Since yesterday - i can't sync:
I get only a gong (which seems that the plug is established)
but nothing happens.
I reinstalled ActiveSync 4.5 (serval times)
I tried it on 4 PC's.
I use the Artemis Touch 4.02 WWE.
Is there a possibility to do something in my situation
PLEASE HELP!
thx
peter
man i had the same ****....and the phone's just a month old...tried a different cable...worked...the default cable charges...but refuses to sync...new cable works fine....go figure
delete your partnerships in AS and try to set up a new one
just try to uncheck USB advance....
hi
pls go to settings -> System tab -> USB to PC -> uncheck checkmark or do viceversa
it will definitely works...
Thx
aakashvijay said:
hi
pls go to settings -> System tab -> USB to PC -> uncheck checkmark or do viceversa
it will definitely works...
Thx
Click to expand...
Click to collapse
* First I changed to unchecked - my device tried to connect - but failed .
* I rebooted my Artemis - my device tried to connect - but failed .
* Then I checked it again - my device tried to connect - but failed .
* I rebooted my Artemis once more - my device tried to connect - and it worked!
thx a lot
peter
AFTER Reconnect - It doesn't work any more
Questions:
Does it depends on a image or is it a hardware trouble?
Does it depends on the pagepoolsize (4mb)?
??
thx
peter
tried an other cable like dv8sted said?
my artemis killed 2 usb cable since last november. cant explain how but it does. only used it for sync/loading and got same issues like you.
dv8ted said:
man i had the same ****....and the phone's just a month old...tried a different cable...worked...the default cable charges...but refuses to sync...new cable works fine....go figure
Click to expand...
Click to collapse
Daiphi said:
tried an other cable like dv8sted said?
my artemis killed 2 usb cable since last november. cant explain how but it does. only used it for sync/loading and got same issues like you.
Click to expand...
Click to collapse
Thx for your adwise.
I tried it with a new usb-cable, but no differences.
I tried it on 4 PC's (with serveral AS-installations)
Shall I make a hard-reset??
thx
peter
once again - delete partnerships in AS, on PC.
you can check your cable by connecting after hard reset, with "naked" rom
shoonari said:
once again - delete partnerships in AS, on PC.
you can check your cable by connecting after hard reset, with "naked" rom
Click to expand...
Click to collapse
thx
I tried it after hard reset, but no connection could be established.
(without any AS partnership on it)
Only the little gong appeared, ...
Then I restored my backup, but the connection failed too.
thx for your help
peter
You may have a fault in the USB socket on your phone. This happened to me with my old magician when one of my kids stood on the cable yanking it out really hard. My solution was to carefully squeeze the end of the cable (the plug that goes into the phone) a little bit tighter with some pliers. After that with that cable, no problem. But I imagine we all have our own different problems.
Only when a fresh reboot
It also happened to my. I just works when the phone is connected while the computer is swichting on. If you try to connect while the computer is up and running it fails, but if you connect before switching the pc on is runs smoothly.
It could be a windows issue. I have the same problem. @home my o2 orbit has some problem on syncing. It connects and authenticates, after that shows check if you have Activesync installed on pc. Some times it works after reinstalling Activesync. But on my office there is no problem at all. Always run smoothly.
So I suggest check with another PC and then try reinstall the Activesync.
Lhrt
well i think it is an issue with htc cables.the plug at my cable is mulfuctioned but it works perfectly on my charger and on another cable!!
lhrt said:
It could be a windows issue. I have the same problem. @home my o2 orbit has some problem on syncing. It connects and authenticates, after that shows check if you have Activesync installed on pc. Some times it works after reinstalling Activesync. But on my office there is no problem at all. Always run smoothly.
So I suggest check with another PC and then try reinstall the Activesync.
Lhrt
Click to expand...
Click to collapse
Thx for your adwise!
But I checked it at (now) 6 different PC's with different cables.
I reinstalled AS severale times - but no changes...
As somebody said, maybe it's a hardware-issue?
I don't now what to do
thx
peter
peter_fuchs1 said:
Thx for your adwise!
But I checked it at (now) 6 different PC's with different cables.
I reinstalled AS severale times - but no changes...
As somebody said, maybe it's a hardware-issue?
I don't now what to do
thx
peter
Click to expand...
Click to collapse
I used to have this problem with my Artemis, all to do with 'Advance Network Connectivity'
Go to Start -> Settings -> Systems -> USB to PC
Uncheck the 'Enable Advanced network functionality' then try and reconnect. Once that has worked, take out USB cable, recheck the check box and connect again.
Should work everytime now....
Well, at least it has for me...
bobjbain said:
I used to have this problem with my Artemis, all to do with 'Advance Network Connectivity'
Go to Start -> Settings -> Systems -> USB to PC
Uncheck the 'Enable Advanced network functionality' then try and reconnect. Once that has worked, take out USB cable, recheck the check box and connect again.
Should work everytime now....
Well, at least it has for me...
Click to expand...
Click to collapse
Thx
But it doesn't work for me
I shall use bluetooth ...
and will never be able to change my image
thx
peter
did you checked if your WM5storage program works?
lhrt said:
did you checked if your WM5storage program works?
Click to expand...
Click to collapse
Do I need this application??
thx
peter
Hey guys, I just came from PDA v23.
I wanted to install crc 14.1 naked bs.
So I installed the at&t stripped version, then crc 14.1 rom.
But after that, I had a lot of problems connecting Active sync with the phone.
I have plugged it into the computer, and it does charge it, but active sync just stays with the gray (idle) icon, nothing happens at all, even if you soft reset it, click on sync or enter the bootloader, nothing happens.
is there something I'm missing?
if it helps, when I plug in the cable, and as soon as it goes in and turns the light amber for charging, activesync does open on the background, but it never syncs not turns green, it does not even try it.
I just tried a different cable that works, and didn't work. Tried another computer and it didn't even bring the message for found new hardware wizard.
Maybe a file was lost, or a driver that recognizes the computer?
I killed the 3 processes from AS:
Wcesmgr.exe
Wcescomm.exe
Rapimgr.exe
And reconnected and opened AS from my phone, and press sync, didn't work.
I also tried restarting computer, neither worked.
I tried using applications that I found to terminate AS like Kill Sync and ReSync, they killed ActiveSync and reopened it, didn't work still.
I've been trying to do this on my work computer, which always worked before the upgrade.
Yesterday I tried connecting the usb into my computer but nothing, also if I connect it to any computer, not even found new hardware wizard comes up.
Tried bluetooth synching, and that worked.
I also tried the WM5 storage prgram, that is not working either.
I thought that maybe I could edit some registry and make this work.
But I tried disabling advanced network functionality, didn't work, enabled it back on, nope.
I think, I'm gonna have to flash it back to the original ROM but as I tried the RUUWrapper is not able to detect my phone, not even on bootloader.
I have a SDHC memory only, and not able to get an SD one.
What can I do in this case?
I have tried multiple things as you can see, and have tried looking on google, but nothing has helped.
I want to see if flashing it to another rom will work, but I'm not able to do it without Active Sync.
How can I flash it back without ActiveSync or fix this Active Sync connection?
Please guys I really need help on this as I'm running out of troubleshooting steps.
DarkWolfx said:
I thought that maybe I could edit some registry and make this work.
But I tried disabling advanced network functionality, didn't work, enabled it back on, nope.
Click to expand...
Click to collapse
did you go to the USB to PC settings and checked the use advanced config?
When I do that it works immediately... maybe try a soft reset and see if it's still
with the right configuration? (unchecked)
Yeah, tried it, but tried it again, checked and restarted and unchecked and restarted, both didn't work.
Thanks for your response.
i cant get my 620 to connect to activesync.
i have reload the program, deleted all connection and still it wont connect.
i rebooted both 620 and laptop. still no good
if i going thru menu on 620 setting connection, usb to pc and check the advanced option the phone trys to connect but a message that the activesync has to be 4.5 or higher is needed, which it is
help
andy12 said:
i cant get my 620 to connect to activesync.
i have reload the program, deleted all connection and still it wont connect.
i rebooted both 620 and laptop. still no good
if i going thru menu on 620 setting connection, usb to pc and check the advanced option the phone trys to connect but a message that the activesync has to be 4.5 or higher is needed, which it is
help
Click to expand...
Click to collapse
Have you try to reinstalled activesync?
so i have same problem
i try remove active sync and setup
but stay same problem
Reinstalling activesync fixed the problem I had, but it was a little different than this one.
finally sorted the problem it was my firewall software...
deleted it and now can connect via activesync
I need to change my ROM, becuase this one I have now just totally screwed up, really badly. I dosent save any contacts and just will always fail synchronizing. Ok, my idea is to revert to the stock ROM, and in order to changethe ROM I attempt to connect via ActiveSync and it does the 'Connecting' thing and then it just says Error.
Please help
And now it dosent even recognize at all. When I plug the phone in via USB mode, it does, but when I say connect via active sync, active sync on my pc dosent open up, and when i open up, it dosen't say connect, or connecting just remains disconnected. can you hard reset your device without using active sync?
Hi!
if you're using windows seven or vista you must have "windows mobile device center" instead "activesync".
perhaps..
You can try going to start>settings>connections>usb to pc
Select "activesync" and unselect the "enable faster data sync" option.
Then try it on your pc again!
flash trough bootloader press volume down when the phone is off then flash trough ruu