Hey all,
I was wondering how many guys here have voip enabled (SIP account) on their mobile. And are you leaving your pda on the whole day/night or not? Because when voip over wifi is enabled, when you power off your device you don't have any wifi anymore so it don't make sense to have voip (excpet for calling out).
I have my voip also for incomming calls.
Grtz,
Hi,
I had the native VOIP support enabled (separate cab) on my previous rom (Black Satin WM6.0), but now I installed the italian "Parabola" rom and I didn't install the voip yet.
I remember that there is an utility like "advanced configuration" that enables you to chose to mantain wifi on also when the screen is switched off in standby mode. I used that because on outcoming call after XX second the system went in standby, the wifi disconnected and I lost the call.. very annoying. After the trick everything was ok!
But I never used the phone as incoming VOIP call.. just for test one time because I use a softphone on my notebook.
Ciao ;-)
Related
Hi,
I've noticed this by the time of making voip call. After some time I'm disconected, and in the same time, I see that hermes is looking for a wlan connection - so the reason of disconnecting the call is broken wifi link.
This issue is 100% by the hermes side. All other equipments working coretley (Access Point is on the Mikrotik with Artheos).
Do you know the reason ? TYTN is with Black Dymond firmware (3.5).
As in the subject...i wanto to make voip calls over 3g networks, not wifi..!!!
It's possible or not??
with Skype 2.2beta works nicely
diektronics said:
with Skype 2.2beta works nicely
Click to expand...
Click to collapse
Oh..i didn't say this..!! Skype is perfectly functionally...but..i wish use integrated voip of wm6..!
I use Internet Calling with my TyTN over 3G on AT&T (PDA connect plan) to my local asterisk server. My server sits behind NAT and my TyTN is on extension 500. My Asterisk server has a trunk connection to my Vonage softphone account for outbound calling. Overall, it works very nicely. There's a bit of breakup, but its quite usable. I'm working on a GSM610 codec now that will improve things even further.
My main issue is power. VoIP over the 3G data connection dramatically reduces battery life. It's like constant surfing with PIE.
I use it over T-Mobile's EDGE. Because this is not real 3G, regular calls can't be received while there is a data stream, but my VoIP provider allows me to forward to my regular phone numbers when the VoIP number is off line.
Bottom line, it works perfectly fine with the included software in WM6.
Hello... I have an Herm200 (HTC TyTN) (Dopod 838Pro) (Softbank X01HT). But i have a problem using VoIP on GPRS...
I can use Windows Mobile 6´s VoIP integrated software (the one you posted in some other forum) while i´m in WiFi, but when i connect through my GPRS (3G) connection, once i dial a number i can hear the telephone to which i´m calling ringing, but i can´t hear neither the ring tone on my phone, nor the other´s person voice, and the same happens to the person in the other end... they can´t listen to me nor i can listen to them...
Is it because my carrier blocked the system? I´m using Vodafone Spain! Is there any carrier in Spain that didn´t block VoIp calling???
Thank you very much for your help!
Ricardo
is there a way to enable the provisioning xml file to enable outgoing voip only?
I have a router with all of my settings and every time i go to use the hermes, it de-registers my router ??
I have a softphone on my pc and it works great without messing with my settings on my main router.
any ideas?
I've read the thread for diamond voip solution, followed every step, but can't make this voip thing work. Since my tmobile signal is very weak at my office, I would like to use voip over wifi to make/receive phone calls through gizmo.
Anybody can help me out?
Check here.
Then use SIP configurator to enter your provider details.
Basically you can stop after step 2 in the wiki (use the 2nd VoIP file(s) listed in step 2), and then use the config tool to make it go.
Use Dontsleep Wifi to prevent sleeping while talking. Use AudioRoute to use the earpiece intead of having to use speakerphone/ear buds.
Make sure you enable the "Internet Calling" today plugin on whatever 2nd today/tf3d detacher/MTP utility you use to have a 2nd today screen.
OR.....
just seach for x-lite or SJPhone and use those over wifi. Both work just fine without using the integrated windows Voip. Make sure that your firewall doesnt prevent you from using SIP protocol or block port 5060