I just purchased the US AT&T Samsung i907 (US i780).
The keyboard sucks. Press and Hold = repeat; not ALT CHAR. Also the keyboard can only accept 1 key input at a time.
With No physical Dpad, the keyboard needs to be fully working.
The keyboard is the same as the i617, but they use different drivers.
i617 = \windows\keypad.dll
i907 = \windows\zylonite_keypad_Us.dll
I've tried grabbing this file off of my friends i617, but copying the file would produce an error or a 0kb file. Using a USB Cable and Activesync wouldn't even show it when browsing files.
I have all the required registry keys that I need... but I'm looking for this "keypad.dll" from a Blackjack II. I've downloaded a few ROM dumps from WM6 and WM6.1 but all I get are RAW files, which I'm assuming are from a Kitchen.
Without getting too involved in Blackjack II Rom and Kitchen setup, does anyone have access to this file they can upload or have a method for me to extract this file myself?
some remote registry editors show the "real contents" of the phone... you may be able dump that way
just out of curiosity sake.... what kind of a drive do windows pick up the mobile device..... you might be able to right a batch file or use ms dos commands (copy function) to dump things...... i dunno, food for thought.....
edit: you can also try mtty or putty
anyone with any other more definitive answers? I'll be the first to admit I have no idea what I'm doing.
I have the RAW ROM Dump files, but I'm assuming you have to be some sort of magical wizard to open them or have a Kitchen.
Any wizards out there have a kitchen they can shoot me a link to an uploaded blackjack 2 keypad.dll?
Bump
Hey, I'm sorry to inform that i cannot help you with this, but if you made any progress, I'd very much like to know how you did it. I need a new driver for the same reasons as you. Looking for a BJ2 keypad driver and with that a scandinavian layout config.
I'm also very interested!!
@player911
Please!! Dont give up! I would like to help. but i have no idea how.
I hope you made a little progress in that problem.
Good luck and keep up you good work in improving the i907/US i780.
I'll upload if I can off of my BJII. I am thinking of getting the Epix, so this will help me a lot.
Will update soon.
I have the same problem in I600
The relationship is still in OEMMITS.
It has a great relationship.
How would I go about to extract this .dll?
Write to the exact.
and from which the device, you toss it
How to update keypad.dll
My actually driver don't work
Relase topic........
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
~~Tito~~ said:
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
Click to expand...
Click to collapse
Do You need keypad.dll from i617?
Yes ! Do you have it?
~~Tito~~ said:
Yes ! Do you have it?
Click to expand...
Click to collapse
Yup.. here You go.
Thanks a bunch! Now to test on my machine ! Backing up right now, and I am about to replace the file when its done. I renamed the keypad.dll to zylonite_keypad_Us.dll, just to see what will happen with out any mods to the file.
EDIT:Ok, here's what happened.
The mouse movement works, but any button presses, keyboard presses do not work. Nothing works except the optical mouse, but it has no click function. Some one has to edit the file to be compatible with the i907/i780. The backlight didn't work either. I got it back to normal, I just deleted the file then soft reseted and the keypad was working again.
EDIT 2:
I opened the DLL in word pad, and there is a lot of things linked to the middle scroll wheel and the 4 way navigation it has. Some one might have to copy some things for the top functions, like the left and right soft keys, the call and end button, the ok and start menu button, and the click of the optical mouse. The remove the functions of the Blackjack 2 like the home button and such.
EDIT 3: Can someone provide the zylonite_keypad_Us.dll for me?
I have the same problem on my i600
Related
Hi
Does anyone have an volume slider hack for Blueangel? I mean to remap the slider as an standart up/down key...
KTamas
Edit: okay, next time i swear i will use the search button first:
http://forum.xda-developers.com/viewtopic.php?t=18216&highlight=vol+volume+slider
Dit this work for you? On my BA (Original Qtek 9090 Dutch Rom) i do not see any buttons after installing the setup file.
Great hack. Really cool.
Does anyone know how to remove it?
I can't seem to get rid of:
\Windows\AddHotkeys.exe
Even if I do it immediately after a soft-reset, it doesn't work. The file is always in use.
I've tried numerous things, but no luck...
Thanks!
Mike
Hi Michael,
happily i know how to remove the things! I cant get it working so its useless 2 me.
Solution:
Open your (PC) explorer and go to your device (in cradle and on activesync) and into the folder \windows\start up\
Rename or remove (didnt remeber surely) the file addbuttons.exe (ie addbuttons.bak) and reboot (soft reset). You can get an error that the lnk addbuttons.bak cannot be found, if so click okay and continue.
Then delete the program via settings\remove programs and after if necessary, remove the addbutton.bak file from \windows\start up\.
Probably this solves your problem.
(But did you really liked it, did it work for u on your 9090?)
safemode
try to use this:
safemode at http://www.monocube.com/
I find it very useful
This is great stuff, guys!
Thanks!
I'll give it a shot.
Although, funnily, last night I was reading a PDF book, and I started getting used to the hack! I may leave it now!!
Silly me!
But these are great to know!
Thank you!
Mike
I discovered that by fiddling around with this file (found in the /windows folder, you can quickly change the keymappings in the beta version. For example, I've only done a quick test, but I remapped the '%" symbol on the Q to be a "!" when alt is pressed or a long press is done. This worked in both Outlook and Word on my test. No reboot was needed BTW.
So if you haven't yet, check it out. I'm surprised it's this easy. What's the catch?
Does this mean that WM6 *will* have T9 on it?
(Pls. excuse my stupidity, but I have an O2 Cosmo (pretty much an Excalibur) and it does hot have currently T9 or XT9 or anything. And I can not reprogram it to access accented characters (which I am dying for).
Thanxx, Mixx
gadgetshrink said:
I discovered that by fiddling around with this file (found in the /windows folder, you can quickly change the keymappings in the beta version. For example, I've only done a quick test, but I remapped the '%" symbol on the Q to be a "!" when alt is pressed or a long press is done. This worked in both Outlook and Word on my test. No reboot was needed BTW.
So if you haven't yet, check it out. I'm surprised it's this easy. What's the catch?
Click to expand...
Click to collapse
This was the solution I have been looking for now for a long time.
Thanks a million for the tip gadgetshrink.
But this does not work for the standard, preinstalled WM5, does it?
Just out of interest, what is the format/syntax of that file?
Thanxx, Mixx
BrumBrum74 said:
This was the solution I have been looking for now for a long time.
Thanks a million for the tip gadgetshrink.
Click to expand...
Click to collapse
It's a normal .txt file
Yes, but what I wanted is its syntax (what is in it and what does thet mean), in the hope that I discover similar files on the standard version.
There are actually some files in \windows that might contain key-codes. such as this file:
SymPad0407.txt
with content such as
...
00A7
00A8
00A9
00AA
00AB
00AC
....
which looks like key-codes to me. But I do not know, what to do with it.
Can someone help?
Thanxx, Mixx
BrumBrum74 said:
It's a normal .txt file
Click to expand...
Click to collapse
I am trying to edit this file but when I put it back on the phone it says I do not have enough permissions.
My phone is 100% unlocked.
I have disabled 'read only' and still can't do it.
I am using Vista if that is where the problem is.
Pagemakers said:
I am trying to edit this file but when I put it back on the phone it says I do not have enough permissions.
Click to expand...
Click to collapse
That's because the file is in ROM. But if you use TotalCmd CE (www.ghisler.com) you can. At least I can on my HTC Universal which otherwise has the same problem.
Yes I had problem with Vista in modifying this file
I was able to change this file using XP
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
TwoPlus1 said:
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
Click to expand...
Click to collapse
This is the quickest fix I have read about. Works with out a hitch for everyone who has done it.
Cool. I m happy I can finally do this. Although I would like to fix the keyboard instead...Anyways what solution do you guys know of that will fix the keyboard? Also where can I get that .nbh file?
Thanks a lot!!!
You can either use WinRAR to unpack it or if you run the .exe it will unpack to '\Documents and Settings\User\Local Settings\Temp'.
I would suggest going back to this ROM as a diagnostic tool to make sure the keyboard isn't faulty...Just make sure you upgrade to SPL 1.35 Olipro first as this makes your phone almost unbrickable in future! If you do brick it so either your stuck in bootloader mode or the OS won't start follow the above instructions...
Well, I know for sure that my keyboard was working perfectly fine before doing the WM6 rom. I have tried fooling around in the Registry...didn't make it worse, but didn't make it better either. What values do you guys have for the qwerty in the registry? Also is there a program that will let you program what key gets what symbol?
I know I am trying to decide between factory, or trying to fix this keyboard characters mix up...
Thanks again.
Not to over-simplify, but what phone are you using? If it's the 8525, there's a CAB file to remap the keys to right places... just search for 8525 keyboard fix.
-Steve
roace said:
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
Click to expand...
Click to collapse
Here is keyboard .cab file fix.
Thank you very much guys. I solved the issue. The fix I ended up using was; going to my local Cingular store and beaming a reg editor into the live 8525 they have there, and looking at the registry where the qwerty is located the hexadecimal value on it is 40409 (located @ local machine/software/oem/qwerty/). Please let others know about this fix for the Cingular 8525.
Also thanks a million to those who actually put a linky and not just say there is something somewhere...
Thanks again,
Cris
hello.
i just installed rickwyatt on my s620.
eyerything worked but now my keys arent properly mapped.
i have the pound symbol on top of j but i now get an @
other keys are wrong also.
please help
aamin said:
hello.
i just installed rickwyatt on my s620.
eyerything worked but now my keys arent properly mapped.
i have the pound symbol on top of j but i now get an @
other keys are wrong also.
please help
Click to expand...
Click to collapse
Maybe try reading this sticky, it has a keyboard fix.
http://forum.xda-developers.com/showthread.php?t=415225
Download the .cab, install, and reboot.
http://forum.xda-developers.com/attachment.php?attachmentid=90606&d=1212678688
lucky they got here before i did.
Wrong Keyboard Mapping 2
Hello
I decided to install Kavana over KickWyatt and installed the Tegic eT9 as recommended in the my previous thread.
Now when I press FN and J, I no longer get @, I get a j. I am supposed to get the English Pound Symbol.
If I press s, I get 4 and no s.
I tried the Et9 Full and that didn't help either. I had a txt file in the installed directory that shows the correct mapping, but I don't know what to do with it.
Please Assist.
Thanks
Adrian
did you reboot your phone at you installed the tegic cab?
YES
Hello
Yes I did reboot. I didn't see anywhere to configure it!!
aamin said:
Hello
Yes I did reboot. I didn't see anywhere to configure it!!
Click to expand...
Click to collapse
you dont configure. take this file and put it in your \windows directory via activesync...then on the phone, browse to that directory and execute it. when its done, reboot the phone. thats all
I had to go back to RickWyatt as WiFi gave problems with Kavana.
I installed the file you suggested as recommended. I still get an @ over j instead of a Pound Sign. I get a = over L instead of a euro sign.
you need the British layout, not american. lol
Here, take this zip file, unzip it.
take the et9 file and drop it into the windows folder.
reboot
Strange considering I bought my phone in NY.
I tried the UK layout that came with RickWyatt but that didn't work.
I replaced the file, and it still doesn't work.
I went into RickWyatt Excalibue eT9 and tried both US and Uk after upgrading file but no luck.
aamin said:
Strange considering I bought my phone in NY.
I tried the UK layout that came with RickWyatt but that didn't work.
I replaced the file, and it still doesn't work.
I went into RickWyatt Excalibue eT9 and tried both US and Uk after upgrading file but no luck.
Click to expand...
Click to collapse
Your doing something wrong? What did you replace as the .cab need to be installed, then reboot
After reboot you may be in predictive text mode if so, go to messaging and in the text input area presss FN+SPACE choose ABC.
Have i just jumped a step ahead?
He needs his layout to be set to UK
Predictive Text is working good. Switching to ABC mode doesn't help.
My Key Board looks like this
http://www.mobile-review.com/pda/review/image/htc/excalibur/s620.jpg
I am getting characters from this keyboard http://www.theunwired.net/media/news/t-mobile_dash.jpg
Thanks
Mikey1022 said:
He needs his layout to be set to UK
Click to expand...
Click to collapse
Yep guessed that and kinda thought he might use Tegic eT9.cab
http://forum.xda-developers.com/showthread.php?t=397723&highlight=tegic
Your Dash has same key layout as mine UK.
runiertt suggested the same file in a previous link and it didn't work.
Is this a different file?
aamin said:
runiertt suggested the same file in a previous link and it didn't work.
Is this a different file?
Click to expand...
Click to collapse
No, i can't understand why yours not working will upload the original eT9.cab when can get on desktop.
Need help to solve some issues after flashing ROM
I have some questions / problems / comments and I’m seeking for help. I recently upgraded my HTC S621 WM5 to WM6.1:
1.- I already upgraded the phone OS using file “RUU_Excalibur_WM61_Kavana_080408_WWE.exe” because I was not able to use the ZIP file “RUU_Excalibur_WM61_Kavana_Rickys_v23_Opera.zip” I already know about error 270 on 3% progress saying that the file is corrupted, I read that I need a paid service to do this, but, why I was able to update it with the EXE file and not with the ZIP?
2.- I have a Spanish or Latin-American layout so the Ñ was missing. This is my keyboard: http://www.aramation.com/mobile/wp-content/uploads/2007/10/htcs621.jpg
I used HKBoySiR’s file eT9 Full.CAB and WPERDOMOS mapping, everything works except the Caps Lock (BLOC). When the keyboard was in the English layout I had the option to use capital letters, but not anymore. If I go to Settings/ Regional Settings/ on language I only get US English. In Locale I get Spanish (Mexico). This is a problem because I use passwords that mix upper and lower case letters. I went to an other thread and installed Mikey1022’s file eT9.Excalibur.zip but it did not solve the problem.
3.- The internet browser button now lunches the CeleTask application instead of the browser. I can’t figure out how to correct this, I read hundreds of post, but I don’t get it.
4.- Mexico is not listed in the Connection Setup Wizard. Thanks to raimin211 for his post on configuring TELCEL.
5.- Is there a way to lock the phone after flashing the ROM to avoid dialers as warn or does it locks automatically with the new ROM?
Thanks in advance for your help. Just in case I fix with your help all the issues and I don’t return to post a thank you note, THANK YOU. Robert
rfmuller said:
I have some questions / problems / comments and I’m seeking for help. I recently upgraded my HTC S621 WM5 to WM6.1:
1.- I already upgraded the phone OS using file “RUU_Excalibur_WM61_Kavana_080408_WWE.exe” because I was not able to use the ZIP file “RUU_Excalibur_WM61_Kavana_Rickys_v23_Opera.zip” I already know about error 270 on 3% progress saying that the file is corrupted, I read that I need a paid service to do this, but, why I was able to update it with the EXE file and not with the ZIP?
Click to expand...
Click to collapse
You can't install a flash a zip file to the best of my knowledge. Unzip it first, and then you should have the exe to flash.
I tried to install the FM radio cab onto my phone, but when I go to run the setu up, I get an error message saying "there is no application associated with (this file), run the application first, then open the file from within the application.
What should I do?
Thanks!!
What kind of file is it? .cab or .exe? If it's a .exe then run it from you're computer. Make sure you got active sync working
thanks for respoinding
It's a cab file.
Aleroluver said:
It's a cab file.
Click to expand...
Click to collapse
.cab files need to be moved to the phone (best to make a folder on the SD card just for that), and run from there.
hi
I tried that, but when I try to run the file on the phone, I get that message. It won't work! If it helps, I'm trying to use one linked to on the thread titled "htc does have an fm radio". I'd really like to get this working!
Thanks!
hmmm
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Aleroluver said:
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Click to expand...
Click to collapse
Do other .cab files behave this way when you try to run them on your phone? It sounds like the one you downloaded might be corrupted..? Your phone should run it directly with no problem as long as the file extension is still ".cab"
I would try a soft-reset, and then try the copy I have attached here instead of the one you first grabbed (it's the same file, but I know this copy works ok). You'll just have to unzip it and then move the cab to your phone.
hey
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Aleroluver said:
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Click to expand...
Click to collapse
Glad to help
I had a wizard (which I think was the same phone as the MDA), and nothing will take the special place it will always have in my heart. However, the TP2 does a damn good job of carrying that torch
yep
The Wizard is the MDA... it was my first touch screen/windows PDA... I'll never forget how excited I was to get it... I miss the nav pad a lot though.... and they removed the IR port (not that I used it) and the camera flash (not that it was very effective)... I don't think new phones should have features removed that their predecessors had... I had to fight Tmo to get a decent price on my TP2 (and I was still raped, and I'd been with them for 10 years) and then the touch screen stopped working completely after a few weeks... Never had that problem with the Wizard (MDA) or Herald (Wing) and I had them for years.... that combined with no nav pad and NO TAB KEY haven't made me fall in love with this device!