Develop Bugs

How to access the registry ?

Hello,
When starting my 9090 I get a message "Impossible to find SmartFilter.exe check the file or the access path..." and the Pocket remains stuck for a while.
I suppose the uninstall process of the trial version of this programm did'nt run complete, and left an entry somewhere.
Searching for 'smartfilter' doens'nt give any result.
Where to search for autorun/autoload folder or key in the registry ?
Thanks for any help.
Jean-Jacques

Go to \windows\startup\ and delete the shortcut for that program. I'm not sure that's your problem, but it sounds like it to me.
If not, then go to http://forum.xda-developers.com/viewtopic.php?t=7136&highlight=regedit
or search around. I know there are two versions floating on this board. I think the previous is the one I use/prefer. Also, I've been told that when connected via activesync, you can use windows regedit to access your device???? Not sure though.
Good luck, and if you muss up your device, it's NOT MY FAULT!!!!

No way :-/
Thanks, but it's a glue... :?
Neither Windows/startup nore deleting entries of NOVOSEC/Smartfilter helped.
I'm going to reinstall the trial version, and uninstall again :twisted:
JJ

Gone !
8)

go to a company called soti - they have a remote regsitry explorer that is very good..
www.soti.net

Fix for Font Problem with new imate ROM and Opera

There's two ways you can fix this.
First:
1) Buy Tweaks2k2 and install on your imate Product
2) Using the Tweaks Program, change the system font
3) Soft Reset using psshutxp (NOT USING THE HARDWARE BUTTON)
4) Start Opera (Problem is solved)
5) (Optional) Run Tweaks2k2 again and change system font back to original (Tahoma). Soft Reset again using psshutxp (NOT THE HARDWARE BUTTON)
Second option (because I'm cheap and I don't want to buy the program:
1) Look here: http://msdn.microsoft.com/library/d.../html/cgconreplacingwindowscedefaultfonts.asp
2) Using a Registry Editing Program, go to the registry entries listed in the link above and change the name of the font (i.e. "Nm") to Courrier New. I recommend you do this to all 4 registry lines (Someone who's smarter than me can figure out which one specifically does the job).
3) Once you've changed the "Nm" entry of the 4 listed registry keys listed above, do a soft reset using psshutxp (NOT THE HARDWARE BUTTON)
4) After reboot, run Opera and the problem is solved.
5) (Optional) Go back and change the 4 registry keys to their original value (Tahoma) and do a soft reset using psshutxp (NOT THE HARDWARE BUTTON) Hope this helps.
Justin

Or another easier way.
Just copy verdana.ttf from your computer to your /windows/fonts directory on your Universal.

Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.

I love this forum and you guys !
thanks you ! Will try this ASAP

baudy2 said:
Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.
Click to expand...
Click to collapse
Well it worked for me. Guess it doesn't mather wich folder you copying it to.

Thanks....
goxboxlive,
Thanks for the comments. I tried you're way as well. You're right, its even easier. However, if folks want to put a custom font on their machine (way off topic), they can use the registry edits I used above. I've been playing with it for a while now. I had no idea you could do all this stuff. Fun.

Re: Thanks....
weatheryoko said:
goxboxlive,
Thanks for the comments. I tried you're way as well. You're right, its even easier. However, if folks want to put a custom font on their machine (way off topic), they can use the registry edits I used above. I've been playing with it for a while now. I had no idea you could do all this stuff. Fun.
Click to expand...
Click to collapse
Hi there. Yes it's a funny machine, there's a lot things you can do with it. One of the funniest things is this: http://forum.xda-developers.com/viewtopic.php?t=35972&postdays=0&postorder=asc&start=0

goxboxlive said:
baudy2 said:
Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.
Click to expand...
Click to collapse
Well it worked for me. Guess it doesn't mather wich folder you copying it to.
Click to expand...
Click to collapse
works as well here, sometimes the most simple solution are the most efficient ones !

Can someone explain what the 'psshutxp' is?
Thanks

psShutXP:
http://ppcsoft.narod.ru/english/
It's a skinnable little app that allows you to turn the screen off (not just backlight - separate utility as well), soft reset, power down, and hard reset. I use it to turn the backlight off and do a soft reset if I can't find my stylus.
Note that the recommendation is probably made with regards to the soft reset otherwise possibly being done before the registry/file changes are written away. You can alternatively wait a while, or try to power down the device fully (hold the on/off (standby, really) button for a while, and you should get a prompt).

ZeBoxx said:
psShutXP:
http://ppcsoft.narod.ru/english/
It's a skinnable little app that allows you to turn the screen off (not just backlight - separate utility as well), soft reset, power down, and hard reset. I use it to turn the backlight off and do a soft reset if I can't find my stylus.
Note that the recommendation is probably made with regards to the soft reset otherwise possibly being done before the registry/file changes are written away. You can alternatively wait a while, or try to power down the device fully (hold the on/off (standby, really) button for a while, and you should get a prompt).
Click to expand...
Click to collapse
psShutXP does not work on WM5 devices. I tryed ones and the ppc died...

ZeBoxx said:
psShutXP:
psShutXP does not work on WM5 devices. I tryed ones and the ppc died...
Click to expand...
Click to collapse
It works great on my JasJar.
Regards,
Gordo

Re: Thanks....
Actually I copied Arial.TTF into the font folder and it became the default font. Tried calbri instead and it too worked..
BUT once you have added a font to the directory I cant seem to delete it.
What I am having happen, is the keyboard pops up as soon as Opera opens, when I close it Opera unboots, ditto with IE now..
Charles

Reverting to Factory Settings. HELP!

I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.

I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).

TwoPlus1 said:
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
Click to expand...
Click to collapse
This is the quickest fix I have read about. Works with out a hitch for everyone who has done it.

Cool. I m happy I can finally do this. Although I would like to fix the keyboard instead...Anyways what solution do you guys know of that will fix the keyboard? Also where can I get that .nbh file?
Thanks a lot!!!

You can either use WinRAR to unpack it or if you run the .exe it will unpack to '\Documents and Settings\User\Local Settings\Temp'.
I would suggest going back to this ROM as a diagnostic tool to make sure the keyboard isn't faulty...Just make sure you upgrade to SPL 1.35 Olipro first as this makes your phone almost unbrickable in future! If you do brick it so either your stuck in bootloader mode or the OS won't start follow the above instructions...

Well, I know for sure that my keyboard was working perfectly fine before doing the WM6 rom. I have tried fooling around in the Registry...didn't make it worse, but didn't make it better either. What values do you guys have for the qwerty in the registry? Also is there a program that will let you program what key gets what symbol?
I know I am trying to decide between factory, or trying to fix this keyboard characters mix up...
Thanks again.

Not to over-simplify, but what phone are you using? If it's the 8525, there's a CAB file to remap the keys to right places... just search for 8525 keyboard fix.
-Steve

roace said:
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
Click to expand...
Click to collapse
Here is keyboard .cab file fix.

Thank you very much guys. I solved the issue. The fix I ended up using was; going to my local Cingular store and beaming a reg editor into the live 8525 they have there, and looking at the registry where the qwerty is located the hexadecimal value on it is 40409 (located @ local machine/software/oem/qwerty/). Please let others know about this fix for the Cingular 8525.
Also thanks a million to those who actually put a linky and not just say there is something somewhere...
Thanks again,
Cris

Problem: The caller can hear him/herself (echo)

Hi all,
today I flashed my P3300 with the Dopod Powermap Rom. Everything ok, but since the flash the person who is calling me, or who i'm calling hears him or herself twice, like some sort of echo. (I'm not using the speaker function). Anybody got any idea how I can resolve this problem.
I already tried lowering the speaker volume, but this did not help.

maybe you can go start-settings-system-microphone AGC-enable
i hope this help

mastelos said:
maybe you can go start-settings-system-microphone AGC-enable
i hope this help
Click to expand...
Click to collapse
I've put it on. I'll let you know what will be the result.

Well that did not help
Anybody some other ideas? cansomebody with a P3300 maybe export this section of his/her registry:
HKLM/Software/HTC
Maybe, if I replace my registery with the original HTC one, the echo will go away???

Hi Bart,
this is the section you requested. It is from a Dutch HTC P3300. I hope this works for you and solves your problems.
Let me know if you have problems with the file.
I have made some changes to the registry, i can't remember if the changes are done in this section or not. I know i've turned off the notification when you send and SMS and I've enabled the GPS-camera-thingy
Goodluck

der_roedie said:
Hi Bart,
this is the section you requested. It is from a Dutch HTC P3300. I hope this works for you and solves your problems.
Let me know if you have problems with the file.
I have made some changes to the registry, i can't remember if the changes are done in this section or not. I know i've turned off the notification when you send and SMS and I've enabled the GPS-camera-thingy
Goodluck
Click to expand...
Click to collapse
Thnx a lot, I'm going to give it a try.
edit:
When I trie to import the HTC.reg I get an error: The specified file is not a registry script.
but thanks again for trying.

hmm, OK. I used Total Commander to export the HTC-entry.
If you open Total Commander and the start the HELP from the start-menu, you will enter the Help-section for TotalCommander. There is a section called: Plugins. Select that and go to Registry. There is explained how to import a .REG-file.
If you have done it like this or if you use a different program then I'm not able to help you any further.

I personally use Resco Explorer with the Registry editor, but i'll install Total commander also and try it again.
edit:
Even when I use Total commander I get the error: can not move or copy file.

Bart1981 said:
edit:
Even when I use Total commander I get the error: can not move or copy file.
Click to expand...
Click to collapse
hmmzz... strange. If I copy the .REG file to the registry like described in the HELP-section of TotalCommander-Plugins-Registry I get no error message.
I copied the file to the clipboard first in TotalCommander, then opened the Registry in TotalCommander and pasted the file there from the clipboard....

I know now what I did wrong. I went to the plugin map, and forgot to go to the registry map. Stupid me. Well let's hope the echo problem is solved now.

Yihaaa, what I suspected was right. The problem of the echo is indeed somewhere inside HKLM\Software\HTC.
The problem is now solved after inserting the original HTC P3300 HKLM\Software\HTC settings.
Thnx a lot!

i already read that your problem was solved on GoT. Great!

THNX
big thnx,my problem with echo was solved too, 3300 (wwe 6.1 by YuE)

needed: \windows\keypad.dll - Samsung i617

I just purchased the US AT&T Samsung i907 (US i780).
The keyboard sucks. Press and Hold = repeat; not ALT CHAR. Also the keyboard can only accept 1 key input at a time.
With No physical Dpad, the keyboard needs to be fully working.
The keyboard is the same as the i617, but they use different drivers.
i617 = \windows\keypad.dll
i907 = \windows\zylonite_keypad_Us.dll
I've tried grabbing this file off of my friends i617, but copying the file would produce an error or a 0kb file. Using a USB Cable and Activesync wouldn't even show it when browsing files.
I have all the required registry keys that I need... but I'm looking for this "keypad.dll" from a Blackjack II. I've downloaded a few ROM dumps from WM6 and WM6.1 but all I get are RAW files, which I'm assuming are from a Kitchen.
Without getting too involved in Blackjack II Rom and Kitchen setup, does anyone have access to this file they can upload or have a method for me to extract this file myself?

some remote registry editors show the "real contents" of the phone... you may be able dump that way
just out of curiosity sake.... what kind of a drive do windows pick up the mobile device..... you might be able to right a batch file or use ms dos commands (copy function) to dump things...... i dunno, food for thought.....
edit: you can also try mtty or putty

anyone with any other more definitive answers? I'll be the first to admit I have no idea what I'm doing.
I have the RAW ROM Dump files, but I'm assuming you have to be some sort of magical wizard to open them or have a Kitchen.
Any wizards out there have a kitchen they can shoot me a link to an uploaded blackjack 2 keypad.dll?

Bump
Hey, I'm sorry to inform that i cannot help you with this, but if you made any progress, I'd very much like to know how you did it. I need a new driver for the same reasons as you. Looking for a BJ2 keypad driver and with that a scandinavian layout config.

I'm also very interested!!
@player911
Please!! Dont give up! I would like to help. but i have no idea how.
I hope you made a little progress in that problem.
Good luck and keep up you good work in improving the i907/US i780.

I'll upload if I can off of my BJII. I am thinking of getting the Epix, so this will help me a lot.
Will update soon.

I have the same problem in I600
The relationship is still in OEMMITS.
It has a great relationship.

How would I go about to extract this .dll?

Write to the exact.
and from which the device, you toss it

How to update keypad.dll
My actually driver don't work

Relase topic........

Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?

~~Tito~~ said:
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
Click to expand...
Click to collapse
Do You need keypad.dll from i617?

Yes ! Do you have it?

~~Tito~~ said:
Yes ! Do you have it?
Click to expand...
Click to collapse
Yup.. here You go.

Thanks a bunch! Now to test on my machine ! Backing up right now, and I am about to replace the file when its done. I renamed the keypad.dll to zylonite_keypad_Us.dll, just to see what will happen with out any mods to the file.
EDIT:Ok, here's what happened.
The mouse movement works, but any button presses, keyboard presses do not work. Nothing works except the optical mouse, but it has no click function. Some one has to edit the file to be compatible with the i907/i780. The backlight didn't work either. I got it back to normal, I just deleted the file then soft reseted and the keypad was working again.
EDIT 2:
I opened the DLL in word pad, and there is a lot of things linked to the middle scroll wheel and the 4 way navigation it has. Some one might have to copy some things for the top functions, like the left and right soft keys, the call and end button, the ok and start menu button, and the click of the optical mouse. The remove the functions of the Blackjack 2 like the home button and such.
EDIT 3: Can someone provide the zylonite_keypad_Us.dll for me?

I have the same problem on my i600