I tried to install the FM radio cab onto my phone, but when I go to run the setu up, I get an error message saying "there is no application associated with (this file), run the application first, then open the file from within the application.
What should I do?
Thanks!!
What kind of file is it? .cab or .exe? If it's a .exe then run it from you're computer. Make sure you got active sync working
thanks for respoinding
It's a cab file.
Aleroluver said:
It's a cab file.
Click to expand...
Click to collapse
.cab files need to be moved to the phone (best to make a folder on the SD card just for that), and run from there.
hi
I tried that, but when I try to run the file on the phone, I get that message. It won't work! If it helps, I'm trying to use one linked to on the thread titled "htc does have an fm radio". I'd really like to get this working!
Thanks!
hmmm
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Aleroluver said:
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Click to expand...
Click to collapse
Do other .cab files behave this way when you try to run them on your phone? It sounds like the one you downloaded might be corrupted..? Your phone should run it directly with no problem as long as the file extension is still ".cab"
I would try a soft-reset, and then try the copy I have attached here instead of the one you first grabbed (it's the same file, but I know this copy works ok). You'll just have to unzip it and then move the cab to your phone.
hey
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Aleroluver said:
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Click to expand...
Click to collapse
Glad to help
I had a wizard (which I think was the same phone as the MDA), and nothing will take the special place it will always have in my heart. However, the TP2 does a damn good job of carrying that torch
yep
The Wizard is the MDA... it was my first touch screen/windows PDA... I'll never forget how excited I was to get it... I miss the nav pad a lot though.... and they removed the IR port (not that I used it) and the camera flash (not that it was very effective)... I don't think new phones should have features removed that their predecessors had... I had to fight Tmo to get a decent price on my TP2 (and I was still raped, and I'd been with them for 10 years) and then the touch screen stopped working completely after a few weeks... Never had that problem with the Wizard (MDA) or Herald (Wing) and I had them for years.... that combined with no nav pad and NO TAB KEY haven't made me fall in love with this device!
Related
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
TwoPlus1 said:
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
Click to expand...
Click to collapse
This is the quickest fix I have read about. Works with out a hitch for everyone who has done it.
Cool. I m happy I can finally do this. Although I would like to fix the keyboard instead...Anyways what solution do you guys know of that will fix the keyboard? Also where can I get that .nbh file?
Thanks a lot!!!
You can either use WinRAR to unpack it or if you run the .exe it will unpack to '\Documents and Settings\User\Local Settings\Temp'.
I would suggest going back to this ROM as a diagnostic tool to make sure the keyboard isn't faulty...Just make sure you upgrade to SPL 1.35 Olipro first as this makes your phone almost unbrickable in future! If you do brick it so either your stuck in bootloader mode or the OS won't start follow the above instructions...
Well, I know for sure that my keyboard was working perfectly fine before doing the WM6 rom. I have tried fooling around in the Registry...didn't make it worse, but didn't make it better either. What values do you guys have for the qwerty in the registry? Also is there a program that will let you program what key gets what symbol?
I know I am trying to decide between factory, or trying to fix this keyboard characters mix up...
Thanks again.
Not to over-simplify, but what phone are you using? If it's the 8525, there's a CAB file to remap the keys to right places... just search for 8525 keyboard fix.
-Steve
roace said:
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
Click to expand...
Click to collapse
Here is keyboard .cab file fix.
Thank you very much guys. I solved the issue. The fix I ended up using was; going to my local Cingular store and beaming a reg editor into the live 8525 they have there, and looking at the registry where the qwerty is located the hexadecimal value on it is 40409 (located @ local machine/software/oem/qwerty/). Please let others know about this fix for the Cingular 8525.
Also thanks a million to those who actually put a linky and not just say there is something somewhere...
Thanks again,
Cris
I was playing around with XCSdM's Bluetooth 0.9f fix and found the issue that's causing it to not work on newer (17913) builds on WM6.
When I navigate to the directory where BTVCFull or BTVCBasic is located, and try to manually launch either of those programs, I get this message:
The file 'BTVCFull' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Click to expand...
Click to collapse
I checked my security on the phone, and it is set to 'Security Off'. Next, I checked the file signature. They seem to NOT be signed at all. However, here's my problem. I can't sign the files myself as I'm too cheap to spring for Visual Studio 2005, and signtool is a big pita. So, Does someone want to sign them and throw the files up here? I think that should fix the problem IMHO.
But, I have identified the core problem at least--which is a step in the right direction.
** FOR THE REAL FIX ** See post's below with the new .cab and reg edit.
if im not mistaken there is a signing program in the new rom kitchen that was released today. its in the extras folder haven't played with it so im not sure how easy or well it works but it looks easy enough. pretty damn cool new kitchen also should check it out!
dunno if they will help
No.. It doesn't.. It's gotta be the drivers.. I'm supposed to be getting some new drivers soon; so, we'll see that helps.
I just wish it'd work correctly without any hacks to fix it..
I noticed the same thing when trying to launch BTVCBasic or Full. Changing the following key worked for me:
HKLM\SOFTWARE\OEM\VoiceCommand\Path="\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
bjevers said:
I noticed the same thing when trying to launch BTVCBasic or Full. Changing the following key worked for me:
HKLM\SOFTWARE\OEM\VoiceCommand\Path="\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
Click to expand...
Click to collapse
That file does not exist in the cab I posted above. Where did you get the file?
LegolasTheElf said:
That file does not exist in the cab I posted above. Where did you get the file?
Click to expand...
Click to collapse
It's in ZaJules VC1.6BTFix.cab. I've attached it for ya.
bjevers said:
It's in ZaJules VC1.6BTFix.cab. I've attached it for ya.
Click to expand...
Click to collapse
That cab worked perfectly.. (after I did the reg.edit)
Thanks!
Okay, I dug through the 160+ pages of his thread (okay maybe the last 20) and I found no mention of the problem I'm having. I apologize if this is a double post but maybe this will help people who are having the same problem quickly find it.
I have a T-mobile Dash I recently updated to Kavana's latest rom, and when I go to type a text message (this is all I've checked so far) Instead of qwerty I get like q.arrty or something of the like. The keyboard mapping is off. Is there a fix for this around?
Self bumping - I found it after looking a little harder. Thanks to Rip Syntaxx for the having it in your sig.
Link: HKBoySiR's Tegic eT9.cab (English Keyboard Mapping)
I also needed this
Thank you for that zip file that should solve the problem with the keyboard. I also have a t-mobile dash and I tried flashing the kavana 6.1 but I had a problem with the keys being backwards but hopefully this fixes it. I would just like to know if anyone can help with the internet settings. I have the t-mobile internet plan but when I flash to kavana it's all erased and tells me to set up an ip or whatever but I do not know how to do any of that stuff and I just want the exact same t=mobile internet settings, can someone help me out?
loba8686 said:
Self bumping - I found it after looking a little harder. Thanks to Rip Syntaxx for the having it in your sig.
Link: HKBoySiR's Tegic eT9.cab (English Keyboard Mapping)
Click to expand...
Click to collapse
i downloaded the eT9.cab on my computer...
what do i do next??
and how do i get back the default voice command??
can someone help me?
i can help. click the search link at the top or spend a few minutes READING THE FORUM. you people with 3 posts make me sick when you expect people to spoon feed you the answer and hold your hand while you perform the solution. i see you can type and spell. TRY READING
nikkie said:
i downloaded the eT9.cab on my computer...
what do i do next??
and how do i get back the default voice command??
can someone help me?
Click to expand...
Click to collapse
Transfer it to your phone via ActiveSync. Put it in your phone's 'My Documents' folder. Using 'File Explorer' (on your phone), open and install the .cab. Reboot your phone.
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Mikey1022 said:
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Click to expand...
Click to collapse
LOL! After I typed the post, I thought "haven't I read this somewhere before??? About 30 other times???"
Mikey1022 said:
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Click to expand...
Click to collapse
or u could start charging...lol
where can i download photo contacts pro 5 from. I would love to have this!!!!!
Here you go
when i try and use the file i get a error message. Is there a cab file for it
What cab are you looking for exactly?
1/26/08 said:
when i try and use the file i get a error message. Is there a cab file for it
Click to expand...
Click to collapse
Haha extract it to your computer and then drag it to your phone because thats a .zip file and your phone does not recognize a .zip file.
ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)
ummm let me try to see whats wrong with it.
1/26/08 said:
ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)
Click to expand...
Click to collapse
Download this and see if this will work ok. http://rs117.rapidshare.com/files/54653658/photocontactsprov507l.zip
i get the same message
Umm try to run it from the computer and see what happens.
it runs the file jz fine
oh ok so did you get it working then?
not on my fone is there a way i can get diz in a cab file?
1/26/08 said:
not on my fone is there a way i can get diz in a cab file?
Click to expand...
Click to collapse
ummm I am not sure, I know that a .cab file would solve everything.
yeah it really would. well thankz alot!! for your help in time if you find something out jz let me know
Just so you all know programs like these use your computer to install the program.
Make sure your phone is connected using a usb cord and it'll install it.
you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02
sunday247 said:
you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02
Click to expand...
Click to collapse
Yea or here are the files to app unlock install the first one and then second one.
Newbie: Photo Contacts Pro 5 info
Hi All,
I am a newcomer to this forum and let me tell you that you guys do a great job with coming up with information and guidelines on Excalibur software so I have to give you applause for that. Does anybody have any info on this? I have the demo and it seems like it is a good application.
Thanks
I loathe photo contacts pro 5..... version 4.03 was and is the best one for the excalibur. my reasoning? after 4.03 the program doesn't run in the background. It shows up in task managers and is easly closed which defeats the purpose of having the program. It also takes up more memory and is even more laggy then version 5. if you can find a version 4.03 i highly recommend you try it.
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue
the .ink file is mising in my startup folder. What should i do? the .exe is still there
nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you
pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.
if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.
Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version
wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!
my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?
Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks
HEEy the same for me, pleas help us!
and microWlan doesn't work in any Roms i tested...
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.