I was playing around with XCSdM's Bluetooth 0.9f fix and found the issue that's causing it to not work on newer (17913) builds on WM6.
When I navigate to the directory where BTVCFull or BTVCBasic is located, and try to manually launch either of those programs, I get this message:
The file 'BTVCFull' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Click to expand...
Click to collapse
I checked my security on the phone, and it is set to 'Security Off'. Next, I checked the file signature. They seem to NOT be signed at all. However, here's my problem. I can't sign the files myself as I'm too cheap to spring for Visual Studio 2005, and signtool is a big pita. So, Does someone want to sign them and throw the files up here? I think that should fix the problem IMHO.
But, I have identified the core problem at least--which is a step in the right direction.
** FOR THE REAL FIX ** See post's below with the new .cab and reg edit.
if im not mistaken there is a signing program in the new rom kitchen that was released today. its in the extras folder haven't played with it so im not sure how easy or well it works but it looks easy enough. pretty damn cool new kitchen also should check it out!
dunno if they will help
No.. It doesn't.. It's gotta be the drivers.. I'm supposed to be getting some new drivers soon; so, we'll see that helps.
I just wish it'd work correctly without any hacks to fix it..
I noticed the same thing when trying to launch BTVCBasic or Full. Changing the following key worked for me:
HKLM\SOFTWARE\OEM\VoiceCommand\Path="\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
bjevers said:
I noticed the same thing when trying to launch BTVCBasic or Full. Changing the following key worked for me:
HKLM\SOFTWARE\OEM\VoiceCommand\Path="\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
Click to expand...
Click to collapse
That file does not exist in the cab I posted above. Where did you get the file?
LegolasTheElf said:
That file does not exist in the cab I posted above. Where did you get the file?
Click to expand...
Click to collapse
It's in ZaJules VC1.6BTFix.cab. I've attached it for ya.
bjevers said:
It's in ZaJules VC1.6BTFix.cab. I've attached it for ya.
Click to expand...
Click to collapse
That cab worked perfectly.. (after I did the reg.edit)
Thanks!
Related
I discovered that by fiddling around with this file (found in the /windows folder, you can quickly change the keymappings in the beta version. For example, I've only done a quick test, but I remapped the '%" symbol on the Q to be a "!" when alt is pressed or a long press is done. This worked in both Outlook and Word on my test. No reboot was needed BTW.
So if you haven't yet, check it out. I'm surprised it's this easy. What's the catch?
Does this mean that WM6 *will* have T9 on it?
(Pls. excuse my stupidity, but I have an O2 Cosmo (pretty much an Excalibur) and it does hot have currently T9 or XT9 or anything. And I can not reprogram it to access accented characters (which I am dying for).
Thanxx, Mixx
gadgetshrink said:
I discovered that by fiddling around with this file (found in the /windows folder, you can quickly change the keymappings in the beta version. For example, I've only done a quick test, but I remapped the '%" symbol on the Q to be a "!" when alt is pressed or a long press is done. This worked in both Outlook and Word on my test. No reboot was needed BTW.
So if you haven't yet, check it out. I'm surprised it's this easy. What's the catch?
Click to expand...
Click to collapse
This was the solution I have been looking for now for a long time.
Thanks a million for the tip gadgetshrink.
But this does not work for the standard, preinstalled WM5, does it?
Just out of interest, what is the format/syntax of that file?
Thanxx, Mixx
BrumBrum74 said:
This was the solution I have been looking for now for a long time.
Thanks a million for the tip gadgetshrink.
Click to expand...
Click to collapse
It's a normal .txt file
Yes, but what I wanted is its syntax (what is in it and what does thet mean), in the hope that I discover similar files on the standard version.
There are actually some files in \windows that might contain key-codes. such as this file:
SymPad0407.txt
with content such as
...
00A7
00A8
00A9
00AA
00AB
00AC
....
which looks like key-codes to me. But I do not know, what to do with it.
Can someone help?
Thanxx, Mixx
BrumBrum74 said:
It's a normal .txt file
Click to expand...
Click to collapse
I am trying to edit this file but when I put it back on the phone it says I do not have enough permissions.
My phone is 100% unlocked.
I have disabled 'read only' and still can't do it.
I am using Vista if that is where the problem is.
Pagemakers said:
I am trying to edit this file but when I put it back on the phone it says I do not have enough permissions.
Click to expand...
Click to collapse
That's because the file is in ROM. But if you use TotalCmd CE (www.ghisler.com) you can. At least I can on my HTC Universal which otherwise has the same problem.
Yes I had problem with Vista in modifying this file
I was able to change this file using XP
I searched for the exact title and I wasn't able to find anything. I am wondering how to install a new Chome thing. I think that is what a .cab is right?
I am talking about installing this....
http://forum.xda-developers.com/showthread.php?t=388248&page=2
Thank you in advance.
Why don't you try asking the creator of those cabs ? What a fresh idea...
Why did this dude open a new thread for a topic from another thread????
carltmac said:
I searched for the exact title and I wasn't able to find anything. I am wondering how to install a new Chome thing. I think that is what a .cab is right?
I am talking about installing this....
http://forum.xda-developers.com/showthread.php?t=388248&page=2
Thank you in advance.
Click to expand...
Click to collapse
Yeah, you're right. Installer files to have the ".cab" extension at the end. Just use ActiveSync to send the file from your PC to your Dash. Remember where you've stored it, because when you open File Explorer (on your phone) you'll need to go straight to that same location. Open the .cab and the file should install on your phone. Reboot.
thank you for you answer. To address what they said about why I alway's open a new thread, I think I already said that I couldn't find a thread about it so I oppenned my own. Also should I have asked this question in a thread about something else (that's what you are makeing it sound like)?
"alway's" "oppenned" and "makeing" are not words in the English language
I put the file on my phone went into it and clicked the setup file, it went to like Internet Explorer and did a bunch of crap, then I restarted the phone and nothing changed?
Install this... "Cab via Activesync".
Link here > http://www.modaco.com/content/manual_uploads/CABviaActiveSync 1.4 Setup.exe
After that installs, go to where you downloaded the cab file on your computer, right click on it, and choose "Cabviaactivesync". Make sure your phone is connected and synced up before you do. It will automatically install on your phone
I had the same question. Thanks for the answers.
alright so I DLed the program and I go into the folder on my computer and go right click the set up and click the Cabviaactivesynce and then it give's me some error?
I don't know what else to do?
This is the error
To Run This Application you first must install one of the following versions of .NET Framework
V2.........
Why don't you just read what the error says and.... act on it ? Go download what it tells you to download! I mean, how much spoon feeding do you need ?
carltmac said:
alright so I DLed the program and I go into the folder on my computer and go right click the set up and click the Cabviaactivesynce and then it give's me some error?
I don't know what else to do?
This is the error
To Run This Application you first must install one of the following versions of .NET Framework
V2.........
Click to expand...
Click to collapse
To Run This Application you first must install one of the following versions of .NET Framework
OrganicM said:
Why don't you just read what the error says and.... act on it ? Go download what it tells you to download! I mean, how much spoon feeding do you need ?
Click to expand...
Click to collapse
how much spoon feeding do I need? You must not remember what it was like to be new to this stuff? I am very new to this modding stuff so I would appreciate if you would let people who are helpfull and not rude help me and you just ignore my thread. Thank you.
I DLed the fix for the .NET problem. Correct me if I am wrong, I download the file from
http://forum.xda-developers.com/showthread.php?t=388248
and then I extract the folder to my desktop, then I open the folder and right click the set up file and click cabviaactivesync. When I do that I now get Exception of Type "System Exception was thrown.
What to do?
Alright so I have been looking (Googling) my problem and I found that 1.3 doesn't have the bug's so I DLed it and now I get unable to install the cab visit there website to report the problem.
I am thinking that I am doing the installation wrong.
In my last post please tell me if I am taking the correct steps and right clicking the correct file(s).?
wow I just figurred it out, I just didn't have to extract the file. WOW. That was simple if I just didn't overthink.
with the .cab installed my HomeScreen is a little weird, it didn't seem to install the whole file because it doesn't look and thing like the pictures given in the thread.
All of my thing's are X'ed out now, such as MY5 and my different browser's?
Also just for info. how do I uninstall a .cab
carltmac said:
wow I just figurred it out, I just didn't have to extract the file. WOW. That was simple if I just didn't overthink.
with the .cab installed my HomeScreen is a little weird, it didn't seem to install the whole file because it doesn't look and thing like the pictures given in the thread.
All of my thing's are X'ed out now, such as MY5 and my different browser's?
Also just for info. how do I uninstall a .cab
Click to expand...
Click to collapse
You just go to Start -> Settings -> More... -> Remove Programs. Voila.
How come when I install a .cab my HomeScreen doesn't look anything like the picture's of the file's I DLed?
carltmac said:
How come when I install a .cab my HomeScreen doesn't look anything like the picture's of the file's I DLed?
Click to expand...
Click to collapse
Now I can't help you there. I haven't tampered with this .cab just yet...so I don't know how it "should" look.
Well seeing how's that's my .cab he installed... I would probably be the most apropriate person to help with it. But since you don't need my help, I'll let someone else have the "honor"
My advice, google BEFORE you ask simple questions...
OrganicM said:
Well seeing how's that's my .cab he installed... I would probably be the most apropriate person to help with it. But since you don't need my help, I'll let someone else have the "honor"
My advice, google BEFORE you ask simple questions...
Click to expand...
Click to collapse
I never said I didn't need your help, in fact your help would be awesome.
Can you help me out as to why the .cab doesn't look like the picture and why My5 and Programs and so on have a red X for the symbol for the Slide?
Okay, I dug through the 160+ pages of his thread (okay maybe the last 20) and I found no mention of the problem I'm having. I apologize if this is a double post but maybe this will help people who are having the same problem quickly find it.
I have a T-mobile Dash I recently updated to Kavana's latest rom, and when I go to type a text message (this is all I've checked so far) Instead of qwerty I get like q.arrty or something of the like. The keyboard mapping is off. Is there a fix for this around?
Self bumping - I found it after looking a little harder. Thanks to Rip Syntaxx for the having it in your sig.
Link: HKBoySiR's Tegic eT9.cab (English Keyboard Mapping)
I also needed this
Thank you for that zip file that should solve the problem with the keyboard. I also have a t-mobile dash and I tried flashing the kavana 6.1 but I had a problem with the keys being backwards but hopefully this fixes it. I would just like to know if anyone can help with the internet settings. I have the t-mobile internet plan but when I flash to kavana it's all erased and tells me to set up an ip or whatever but I do not know how to do any of that stuff and I just want the exact same t=mobile internet settings, can someone help me out?
loba8686 said:
Self bumping - I found it after looking a little harder. Thanks to Rip Syntaxx for the having it in your sig.
Link: HKBoySiR's Tegic eT9.cab (English Keyboard Mapping)
Click to expand...
Click to collapse
i downloaded the eT9.cab on my computer...
what do i do next??
and how do i get back the default voice command??
can someone help me?
i can help. click the search link at the top or spend a few minutes READING THE FORUM. you people with 3 posts make me sick when you expect people to spoon feed you the answer and hold your hand while you perform the solution. i see you can type and spell. TRY READING
nikkie said:
i downloaded the eT9.cab on my computer...
what do i do next??
and how do i get back the default voice command??
can someone help me?
Click to expand...
Click to collapse
Transfer it to your phone via ActiveSync. Put it in your phone's 'My Documents' folder. Using 'File Explorer' (on your phone), open and install the .cab. Reboot your phone.
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Mikey1022 said:
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Click to expand...
Click to collapse
LOL! After I typed the post, I thought "haven't I read this somewhere before??? About 30 other times???"
Mikey1022 said:
Rip...LMAO you might as well place those instructions in your signature as well
or make a read me text in a a folder prior to the folder with the cab
Click to expand...
Click to collapse
or u could start charging...lol
I tried to install the FM radio cab onto my phone, but when I go to run the setu up, I get an error message saying "there is no application associated with (this file), run the application first, then open the file from within the application.
What should I do?
Thanks!!
What kind of file is it? .cab or .exe? If it's a .exe then run it from you're computer. Make sure you got active sync working
thanks for respoinding
It's a cab file.
Aleroluver said:
It's a cab file.
Click to expand...
Click to collapse
.cab files need to be moved to the phone (best to make a folder on the SD card just for that), and run from there.
hi
I tried that, but when I try to run the file on the phone, I get that message. It won't work! If it helps, I'm trying to use one linked to on the thread titled "htc does have an fm radio". I'd really like to get this working!
Thanks!
hmmm
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Aleroluver said:
Now when I click on the setup file, it tries to open the Opera browser, but all I get is a blank page and nothing happens!
Click to expand...
Click to collapse
Do other .cab files behave this way when you try to run them on your phone? It sounds like the one you downloaded might be corrupted..? Your phone should run it directly with no problem as long as the file extension is still ".cab"
I would try a soft-reset, and then try the copy I have attached here instead of the one you first grabbed (it's the same file, but I know this copy works ok). You'll just have to unzip it and then move the cab to your phone.
hey
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Aleroluver said:
THANK YOU! The file you linked worked perfectly! Thank you again.... I really appreciate it. So gratifying to finally have it work. I still miss my MDA and Wing for many reasons, but I'm feeling a little better about the TP2...
Click to expand...
Click to collapse
Glad to help
I had a wizard (which I think was the same phone as the MDA), and nothing will take the special place it will always have in my heart. However, the TP2 does a damn good job of carrying that torch
yep
The Wizard is the MDA... it was my first touch screen/windows PDA... I'll never forget how excited I was to get it... I miss the nav pad a lot though.... and they removed the IR port (not that I used it) and the camera flash (not that it was very effective)... I don't think new phones should have features removed that their predecessors had... I had to fight Tmo to get a decent price on my TP2 (and I was still raped, and I'd been with them for 10 years) and then the touch screen stopped working completely after a few weeks... Never had that problem with the Wizard (MDA) or Herald (Wing) and I had them for years.... that combined with no nav pad and NO TAB KEY haven't made me fall in love with this device!
INSTALLING HOMEBREW APPS​
Ok, so I figured out how to get a homebrew app installed that has "INTEROPSERVICES".
NOTE: Most apps still don't load/work, but at least they can be installed. So, maybe someone can figure out what to do from here. In fact, the only app that works properly that I've tested is Navigator Select. Granted this app is probably signed with a cert or what ever because it's from an OEM.
Instructions;
1) Extract the XAP using 7Zip/WinRAR/etc.
2) Find WMAppManifest.xml & open it in an editor (Wordpad/Notepad/VS/Word/etc.).
3) Delete the line "<Capability Name="ID_CAP_INTEROPSERVICES"/>"
4) Save the file.
5) Compress all files from XAP into a ZIP
6) Rename ZIP to XAP
7) Install
RESUMIBLE APPS​
Also, I found this article.
In order to make an app resumible, we'll edit the same file as above, but this tome we're going to add "ActivationPolicy="Resume"" to the "<DefaultTask Name="_default" NavigationPage="PivotPage.xaml" />" line so it looks like "<DefaultTask Name="_default" NavigationPage="PivotPage.xaml" ActivationPolicy="Resume"/>". Save file compress everything to ZIP & rename to XAP same as above. Now install apps using what ever side loader you like. I used "Tom XAP Installer".
NOTE: DON'T use the resumible hack on Navigator Select, at least on Mango. Otherwise it'll just show a black screen if you open it from the start menu/app list when you have a map open. You can still use task switcher to open it, but just not worth it. Than again this could be a Mango problem with the resume hack.
Anyone out there with a T-Mobile USA HD7 happen to have WPDM from Schaps installed & no Mango Beta? If so, can you see if you can copy out the TMOUS Cert that should be on your device. I'm on Mango, so cant. I want to try to sign a homebrew app with that cert & see if it'll work on Mango Beta.
I rolled back but have the HTC 7 Pro, so I can send you that cert, maybe you can edit it so it works with the HD7?
Glad to see you working on this btw .
blindpet said:
I rolled back but have the HTC 7 Pro, so I can send you that cert, maybe you can edit it so it works with the HD7?
Glad to see you working on this btw .
Click to expand...
Click to collapse
Thank you, it shouldn't matter which HTC device it comes from. The main issue is I'm on T-Mobile so for my device has T-Mobile's OEM cert on it where your 7 Pro most likely doesn't. Probably has a Verizon OEM or for what ever OEM you're on. Your device might have an HTC Cert though. The main thing I'm looking for is a cert that's trusted & allowed INTEROPSERVICES access as OEM's/Manufacturers are the only ones allowed this atm. This is why Navigon Select works even though it has INTEROPSERVICES. I'm hoping I can use the SDKCert Signer tool & an OEM cert to sign the dll's/mui's in the XAP with.
I'm on an unbranded HTC 7 Pro. If you walk me through extracting whatever certs you can use I'm more than happy to do it.
blindpet said:
I'm on an unbranded HTC 7 Pro. If you walk me through extracting whatever certs you can use I'm more than happy to do it.
Click to expand...
Click to collapse
Okay, you'll need WPDM. Install that to your pc/laptop. Once you run it the first time, it'll prompt to install TouchXperience. Open TouchXperience on your 7 Pro. Now WPDM will sync with it. Now open the file manager in WPDM on your PC. The certs should be in \windows or one of it's sub directories. I don't remember exactly where I saw them. Try to find one with HTC or Test in the file name. You can than copy if & paste it into windows explorer somewhere to zip it up & upload it here.
Unsigned app limit
Any idea which homebrew can get rid of the unsigned applications limit on Mango?
I am afraid of removing all my unsigned apps for nothing
Before following the OPs suggestions I was not able to deploy Navigon Select onto my device. After editing WMAppManifest.xml I was finally able to deploy it again. Sadly it won't work. After startup it tells me that it can't complete the registry process due to not being able to connect to the network. Pitty.
dkp1977 said:
Before following the OPs suggestions I was not able to deploy Navigon Select onto my device. After editing WMAppManifest.xml I was finally able to deploy it again. Sadly it won't work. After startup it tells me that it can't complete the registry process due to not being able to connect to the network. Pitty.
Click to expand...
Click to collapse
It worked for me, which version are you using. I have the patched 1.3 install with maps & everything.
Handala said:
Any idea which homebrew can get rid of the unsigned applications limit on Mango?
I am afraid of removing all my unsigned apps for nothing
Click to expand...
Click to collapse
Advanced Config has that feature. Not sure what else does. There's a couple apps that do it.
drkfngthdragnlrd said:
It worked for me, which version are you using. I have the patched 1.3 install with maps & everything.
Click to expand...
Click to collapse
Tried it with 3.0 and 1.4. Both patched. I wasn't able to deploy either one of them.
dkp1977 said:
Tried it with 3.0 and 1.4. Both patched. I wasn't able to deploy either one of them.
Click to expand...
Click to collapse
In order to deploy you have to edit that file I listed in the OP. I've got v1.3 installed as US maps only works with v1.3 & is what the map loader software came with.
EDIT: Whoops, v1.4 is what i have installed on Mango.
drkfngthdragnlrd said:
In order to deploy you have to edit that file I listed in the OP. I've got v1.3 installed as US maps only works with v1.3 & is what the map loader software came with.
EDIT: Whoops, v1.4 is what i have installed on Mango.
Click to expand...
Click to collapse
Yeah, I followed your advice and was able to deploy it successfully. But I just can't use it anymore since it won't registert. It keeps telling me to turn airplone mode off (which isn't on anyway).
dkp1977 said:
Yeah, I followed your advice and was able to deploy it successfully. But I just can't use it anymore since it won't registert. It keeps telling me to turn airplone mode off (which isn't on anyway).
Click to expand...
Click to collapse
Hum, no clue, I used Map Loader to add my maps. It turns my pc into the server. Have you checked you internet to make sure you have a good connection by loading any website in IE. Also, try WiFi. My only guess could be a data connection problem.
drkfngthdragnlrd said:
Hum, no clue, I used Map Loader to add my maps. It turns my pc into the server. Have you checked you internet to make sure you have a good connection by loading any website in IE. Also, try WiFi. My only guess could be a data connection problem.
Click to expand...
Click to collapse
Tried 3G and WiFi. No luck. -.-
dkp1977 said:
Tried 3G and WiFi. No luck. -.-
Click to expand...
Click to collapse
That sux, the server must not recognize a Mango device or something. My only suggestion is if you have iPhone Maps for Navigon Select, use Map Loader found here on XDA to load those maps.
drkfngthdragnlrd said:
Advanced Config has that feature. Not sure what else does. There's a couple apps that do it.
Click to expand...
Click to collapse
Ok thanks a lot, I'm going to try your trick then! Hope this homebrew will launch on Mango...
drkfngthdragnlrd said:
That sux, the server must not recognize a Mango device or something. My only suggestion is if you have iPhone Maps for Navigon Select, use Map Loader found here on XDA to load those maps.
Click to expand...
Click to collapse
k, I'll try. Gotta read the whole thread first, since it seems rather complicated to set up. Thanks for your help.
dkp are you dev unlocked?
WPDM is broken, it doesn't work with the new beta tools. I uninstalled them and reinstalled WPDM but it crashes on load. Unfortunately I don't have the time to mess with this now so if anyone else can provide the certs that'd be great.
Running touchxperience on my phone I can't find an HTC or Test folder in \windows.
blindpet said:
dkp are you dev unlocked?
WPDM is broken, it doesn't work with the new beta tools. I uninstalled them and reinstalled WPDM but it crashes on load. Unfortunately I don't have the time to mess with this now so if anyone else can provide the certs that'd be great.
Running touchxperience on my phone I can't find an HTC or Test folder in \windows.
Click to expand...
Click to collapse
No problem, I have the same problem with WPDM & the beta tools. I may just have to go back to NoDo to get them myself. At least now someone made a BAT files to update so hopefully I won't have to reset my HD7 to get back into Mango again.