uppgradecode error - Touch Diamond, MDA Compact IV ROM Development

is samone no if it could fix this problem
i have uppgrade rom code error please try again,thas i it says on the screen
i cant do this , dosent works http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
it dosent helps
cant uppgrade again for there is no conection.... is kaputt

you might want to look in my thread, what were you upgrading?

hi
and where is that
wen icrhases i put in the RUU_Diamond_HTC_SVE_1.93.413.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
and i cant get conection from the computer
the screen is red green blue white
and it says uppgrade code error please try again

Related

universal got stuck please help

i recently tried to update my universal, with the crossbow rom, after pluging the device in my desktop, it started with the update, and placing a message, connection erorr , resulting in ,that my device is stuck in the boot mode, and will not react anymore.
i have tried to update ,without result , i keep getting the message 150 connection error
id there anybody out therer who has had the same problem, if so did you fix , and how did you fix it?
regards peter
I will tell you what I did it my be wrong but I unpluged the usb from the uni and pushed the front light button,power button and the reset at the same time and pluged it in again you get the popup found new device ppc. Then reran the rom update.
NO, just take the SD Card out of the slot and proceed with the update. You must be using a 4GB SD Card, aren't you?
rom upgrade ,universal dead
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
pcsw said:
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
Click to expand...
Click to collapse
Hi, are you able to get in to the bootloader mode?
Try reading:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
Hope it helps.

Help needed please

Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ActiveSync will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
When to upgrade from bootloader, I guess you have to turn of your activesync, you can not allow activesync to use usb or download activesync toogle from: http://www.micrologics.co.uk/ (I use it to make use AS don't bother my prosses). And maybe the ROM file is broken?

Help needed please

Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
mono33 said:
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
Click to expand...
Click to collapse
Think I have already posted a reply to this. Please see elsewhere. This is not the right thread.

help me please

Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
If this software upgrade was ROM upgrade, you're stuck in the Bootloader - check out the answers in the wiki and in the Universal Upgrading thread.
mono33 said:
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
Click to expand...
Click to collapse
If you have reached the bootloader mode and the word 'serial' changes to 'USB', you are in luck. Only before you connect to PC for upgrade open Active Sync on the PC and go to File / Connection Setting and UNCHECK 'allow USB connection' Checkbox. Then connect your device and follow the upgrade procedure. Actually you have posted this in the wrong forum. This should have been in the upgrade forum. Upgrade is not difficult. Please do let us know if you require any further help.

My P800 not show bootloader mode

i recently buy Dopod p800 from my friend ....
OS use WM6.1 ROM Oops .....
But when i try to change ROM it not work ....
it shown Code Error 260.
I try to change data cable and move it to other USB port, it's still shown Code Error 260.
I'm little confused so i try to enter bootloader mode. But strange everytime i get inti bootloader mode it's just shown a white screen not tricolor mode as usual.
I have check SPL shown 27.00 Ispl shown 1.11.
Does my device has brick ?
Or there is a solution for it ?
i think i must try this
http://forum.xda-developers.com/showthread.php?t=557043

Categories

Resources