Hi all,
I just bought the qtek 9000 but os is in french, i have the os in english but when i want to do this it says wrong rom. Could someone please guide me threw this problem.
Also if i'm able in the future to get it upgraded in english wont i have a problem with the azerty keyboard, cause english os is with qwerty keyboard no?????
Please advice
Daffy
Hello,
First, extact your new english rom, than repace files in new rom with files in my package. Put universal in bootloader mode, run MaUpgradeUt_noID.exe wait... 30-40 minute and enjoy new rom
Thx for the reply but this is chinees for me. I am completly new at this. What do you mean with extract new boot and afer that replacing files with yours??? Extract from where and how?? also upgrade tool is showing picture from S100 and mine is 9000?? then how do you put your phone in bootloader mode??? and what about keyboard problem???? ( azerty/qwerty )
this is what i get as error :
I know that You have country id problem, I will try to explain how to.
1 If you have upgrade file as XXXX.exe you will have to extract that file using win rar (just right klik on it and extract to your folder.
2. Unpack file from my package WM2005reinstall.rar
3. Replace file in the original unpacked rom with files from WM2005reinstall.rar (RUU.dll , Getdevicedata.exe ...
4. Run MaUpgradeUt_noID.exe That file has no country specyfied so You can install Your rom (English). It is working in all MDA so don't worry about different picture.
Hope it wiil be clear if not - write ...
Ok got that. Finally but before i try this upgrade, what about keyboard. Will it be different?? (azerty/ Qwerty, do you know this...
Thank you verry verry much
If it is WWE rom (World Wide English) it will be qwerty
If other like German - qwertz
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
daffy duckati said:
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
Click to expand...
Click to collapse
Here's your solution:
1. Get a registry editor. Here is a free one :
http://www.pocketpcfreewares.com/en/index.php?soft=92
2. Look at the value in the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty
The DWORD should show what the FRENCH code is for in XXXXX format. Write this down.
3. Upgrade to the new english ROM
4. Install again the RegEditor
5. GO to same local key and the key will be 66589. Change this to the value of the french keyboard (value you got from step 2)
Goodluck
based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!
Thanks, has it included the Chinese IME (like Pinyin by keyboard)?
sorry no china-japanese ime on it.
i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/
Did you mean thai font include?
wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****
Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.
Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT
first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode? right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!
thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's
i'm using the localizated wm6 emulator image for hermes, i've extracted all the 0410.mui and 0410.dll but the first alignment screen won't come up so...what's wrong ??
i've checked all the .rgu and other register and all is ok...all is changed to 0410
the system folder (in start menù) is empty, the other things is ok, the phone boot and the touch work fine but it's not aligned...
who can help me ? i can upload my coocked os...
sorry for my english...
which other file i must include for translate it?
where is the mistake ???
please, french cooker help your transalp cousin !
I've been trying to change a chineese rom into english.I've replaced all string in rgu files and also all *.804.dll.mui into *.409.dll.mui files.
But:
1-default.hv and user.hv seems to have some chineese references too.I cant use rgucomp as it doesnt correctly translate file.What else can i do?
can i use this file from another rom?(i've tested with another rom but it rom then didnt boot,maybe with exact same os versions?)
2-some *.409.mui.dlls are not available in english roms,what should i do about corresponding *.809.mui.dll files?
3.i also cant change these two registery settings,when i change no boot!
[HKEY_LOCAL_MACHINE\nls]
"DefaultLCID" = dword:804
[HKEY_LOCAL_MACHINE\nls]
"SystemLCID" = dword:804
4.what other things should i change?
thank you!
Nobody?!!
We have this too many rom cookers here and not even 1 answer?!
Hi all!
After see this video :
http://www.youtube.com/watch?v=ZLbQU9PjrxQ
I want to install Windows Mobile 6.5 (english version) on my Toshiba G810.
I found the right rom (but completely in chinese):
http://4tv.cn/plus/download.php?ope...hLkc4MTAuMjExODkuMjExODkuQ0hTLllILkxpdGUucmFy
How can I change the language files?
How can I do this? I must to unpack the rom file, change the language files and then rebuild the rom file? Please, help me!
changing the rom as far as I understand is very very very much work
few people have don it and never with 100% success
the thing is that there is no language files
text is hard-coded into exe and dll files
and each of them have to be manually changed using a hex editor
This means that I must learn chinese language?
Ok ok... It's a joke... Can I install a similar rom image of a similar device (same processor family, same resolution)?
Rudegar said:
changing the rom as far as I understand is very very very much work
few people have don it and never with 100% success
the thing is that there is no language files
text is hard-coded into exe and dll files
and each of them have to be manually changed using a hex editor
Click to expand...
Click to collapse
it's not a perfact rom.
It always losts signal when g810 is sleeping.
don't try this one.
ipaq hx 2190
i need to change the language from german to english on my ipaq hx2190 can anyone help?