Related
Ok guys ... let's do the things right !
After the bootloader problem .. steps to revive the MDA PRo
1. latest jasjar update with patched version
2. reset and RADIO uni_radio_1_03_01 ONLY update with the patched app
3. FULL RESET with POWER+RESET
Mine is back.... have fun !
and BTW ... it's the english one ... from the german version ..
R 1.03.01
G 42.36.P8
D 1.13.53 WWE
NEXT STEP: keyboard
I dont understand 1 thing you said
please explane step by step
ok
works now
thanks
.uj
i'm thinking about leaving it as is because it's not only the Y and Z but all the signs.
so what i'm thiking is more to change only the mapping of the hard keys to the real ones.
or just find a replacement
this would be the best of all ... but now it's too soon to find one.
anyone has an MDA Pro english version dummy model keyboard (if it's like the original but without anything in) ?
OK guys,
Congratulations. Now that your stress is over, could you share your experience with us.
I will be going for my device coming friday.
Can you please give a step-by-step instruction how to change the German to ENGROM, and
how to change the keybord hardware and software/registry? :wink:
d.zee said:
OK guys,
Congratulations. Now that your stress is over, could you share your experience with us.
I will be going for my device coming friday.
Can you please give a step-by-step instruction how to change the German to ENGROM, and
how to change the keybord hardware and software/registry? :wink:
Click to expand...
Click to collapse
We do need first a copy of your registry to make the most of the keybord because neither I nor akira didn't do it.
The upgrade has 4 steps:
1. download the patched UpgradeRom exe
2. upgrade the MDA PRO with the latest JASJAR Rom - beware after this it's not usable
3. upgrade with the Radio only version
4. full reset (POWER + RESET)
decebal said:
We do need first a copy of your registry to make the most of the keybord because neither I nor akira didn't do it.
The upgrade has 4 steps:
1. download the patched UpgradeRom exe
2. upgrade the MDA PRO with the latest JASJAR Rom - beware after this it's not usable
3. upgrade with the Radio only version
4. full reset (POWER + RESET)
Click to expand...
Click to collapse
I just hope it will not sound harsh, but you could have given some directions with, like, where to get 1) (the patched) upgraderom.exe, 2) which jasjar rom 3) which radio version.
I have the "JASJAR_WWE_11353_137_10301.zip", I believe the radio-only-package is "uni_radio_1_03_01.exe", but i'm missing the "patched upgraderom.exe".
Please don't expect we do all know everything, because if we did, we wouldn't have asked.
Thanks once again!
Dean
-------------
ok... i found the topic -> http://forum.xda-developers.com/viewtopic.php?t=29362
here you go
Ok. Let's try it again.
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
1e. it will get to the bootloader only MDA Pro
2. get the uni_radio_1_03_01
2a. get the exe from the zip file - if needed
2b. unzip the exe file to a directory
2c. place the enclosed file MaUpgradeUt_noID in the directory
2d. run the upgrade
3. cold reset - press at the same time POWER + the reset with the stylus
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567
5. softreset
6. enjoy
Thanks!
Well, yeah! That's another story and I really want to thank for the prompt response.
(btw, have you thought of putting the Radio_.nbf from uni_radio_1_03_01 into the folder of the extracted files from JASJAR_WWE_11353_137_10301, and then run the upgrade - I think this could make it in one step, instead in two)
What a nightmare
Finally after reading every bit of advice I have got my Jasjar back up with the new rom.
I was sweating like nobodies business.
Thanks to everyone who contributed to the rom upgrade discussions. I think i'd have gone mad tonight without knowing others were in the same boat.
Great!
How did Akira change his YZ keys? Can you lift them off easily? Or do you have to open the device?
Re: here you go
decebal said:
Ok. Let's try it again.
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567
5. softreset
6. enjoy
Click to expand...
Click to collapse
Does this registryhack change the whole keyboard to Qwerty or only the Y and Z.
Does the ENGROM have the Qwerty soft keyboard or is it still German?
Please clarify? :wink:
Re: here you go
d.zee said:
decebal said:
Ok. Let's try it again.
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567
5. softreset
6. enjoy
Click to expand...
Click to collapse
Does this registryhack change the whole keyboard to Qwerty or only the Y and Z.
Does the ENGROM have the Qwerty soft keyboard or is it still German?
Please clarify? :wink:
Click to expand...
Click to collapse
yes .. changes the entire layout as displayed on the keys
Re: here you go
Hi,
> Does the ENGROM have the Qwerty soft keyboard or is it still German?
> Please clarify?
after flashing with the new jasjar-rom the complete keyboard design is different from the german layout.
It is not only the difference from "y" and "z", the complete set of chars like "- / ( ) % @" are not where the are on the german keyboard.
Editing the registry will give you a 100% correct german keyboard - all chars are where they are printed - but with the english rom.
- Superbowl
OK guys, thanks for your prompt reaction.
Now if I understand it correctly, the registryhack changes the "hard" keyboard layout back to german (qwertz), i.e. you can leave the keybord as it is and you don't go ripping off keys to put them back at other places.
Does the same account for the "soft" keybord, i.e on the touchscreen? Is it in Qwerz or is this in English, Qwerty?
> Does the same account for the "soft" keybord, i.e on the touchscreen?
> Is it in Qwerz or is this in English, Qwerty?[/quote]
Hi,
just checked it ... the hard keyboard is "qwertz" and the soft keyboard is "qwerty".
- Superbowl
based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!
Thanks, has it included the Chinese IME (like Pinyin by keyboard)?
sorry no china-japanese ime on it.
i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/
Did you mean thai font include?
wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****
Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.
Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT
first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode? right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!
thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's
I've bought a P320 from ASUS HK, but with CHT ROM ofcourse. Could anyone tell me where to download WWE ROM?
Thanks for reading or help
I see many pic about p320 with english lang but I can't find any P320 Rom WWE. Who can send me the link to download p320 wwe.thanks so much
(this is a pic about p320 english: www.playbeta.com/images/2008/03/asus-p320-1.jpg)
nobody care????
up....up....up....up
up..
up..up..up no one care??????
I hope ASUS has availible ROM WWE soon
Same here
i am waiting for update of english wwe rom for p320
i had purchased this phone in indoa then i upgraded to some zzt rom which was unfortunately chinese ..
i qureid the asus support center and they were not helpful they suggested to send it to service center...
then i found that they had posted russian and french roms version 4.10
.. i tried to upgrade to french rom but i cudnt for the first trial it said that u cant upgrade to any rom of different language ..:-(
then i tried to use the chinese rom update file and the rom of french and it was upgraded to french now atleast i have french where i can understand something atleast better than chinese roms...
rajivenator said:
i am waiting for update of english wwe rom for p320
i had purchased this phone in indoa then i upgraded to some zzt rom which was unfortunately chinese ..
i qureid the asus support center and they were not helpful they suggested to send it to service center...
then i found that they had posted russian and french roms version 4.10
.. i tried to upgrade to french rom but i cudnt for the first trial it said that u cant upgrade to any rom of different language ..:-(
then i tried to use the chinese rom update file and the rom of french and it was upgraded to french now atleast i have french where i can understand something atleast better than chinese roms...
Click to expand...
Click to collapse
Could you tell how you made it by using the chinese rom update file with the french. I got the 4.10 chinese HK rom and the french one.
What are the step by step procedure ?
Thks for you help
slammer2x said:
I hope ASUS has availible ROM WWE soon
Click to expand...
Click to collapse
P320 ROM WWE is now available on asus support website.
Alternatively, you can download it directly from their ftp.
ftp://ftp.asus.com.tw/pub/ASUS/Mobile_Phone/P320/
If your P320 is originally a Chinese machine, and you want to flash it to other language, just follow what rajivenator did.
1) Download both Chinese ROM and English ROM (or other language you need)
2) Extract the zip files and you'll get a "2577" folder for each ROM.
3) Copy the "autorun.exe" of the Chinese ROM and the .bin file of the English ROM into a "2577" folder anywhere you like.
4) Then copy this "2577" folder to the micro sd card and put it into P320.
5) Normally it will autorun and what you need to do is to follow the on-screen instruction.
6) If nothing happens, open File Explorer and go to the "2577" folder and click autorun.exe.
Hope it will help some of you.
Cheers
fifalover said:
P320 ROM WWE is now available on asus support website.
Alternatively, you can download it directly from their ftp.
ftp://ftp.asus.com.tw/pub/ASUS/Mobile_Phone/P320/
If your P320 is originally a Chinese machine, and you want to flash it to other language, just follow what rajivenator did.
1) Download both Chinese ROM and English ROM (or other language you need)
2) Extract the zip files and you'll get a "2577" folder for each ROM.
3) Copy the "autorun.exe" of the Chinese ROM and the .bin file of the English ROM into a "2577" folder anywhere you like.
4) Then copy this "2577" folder to the micro sd card and put it into P320.
5) Normally it will autorun and what you need to do is to follow the on-screen instruction.
6) If nothing happens, open File Explorer and go to the "2577" folder and click autorun.exe.
Hope it will help some of you.
Cheers
Click to expand...
Click to collapse
Many thanks. I've done after 2 days searching for solution.
my rom now is Chineses rom.I want to up wwe Rom,but it display that "can't up Rom with different langgue.Is there any tools to unlock lang for P320 as P525 or others.thanks so much
hpdefalcon said:
my rom now is Chineses rom.I want to up wwe Rom,but it display that "can't up Rom with different langgue.Is there any tools to unlock lang for P320 as P525 or others.thanks so much
Click to expand...
Click to collapse
http://www.mediafire.com/download.php?77hl6ni4skf
Download and extract this file, and then copy 850_GAX_SD.bin (hidden) to root of SD card. Plug SD card to PPC and switch device to SD boot loader by holding Volume down button and
click Reset, still holding Volume down until you see card checking.
Sorry about bad English.
Change P320 rom
thks for the instructions
Cheers
--------------------------------------------------------------------------------
I have purchased this Asus P320 from france thinking that it would be a dodle to change the language to English, just a simple swap of roms. But it seems alot more complicated than that, I have read an earlier post which gives me an idea of how to change the roms but this was for chinese to french. It wont seem to work getting it to go from French to english. Any Ideas on what to download or do? I have followed these instructions on here but change it from french to english; like take the auto installer from the french rom firmware and take the WWE rom but it still says that it is wrong language and if i try reseting it with holding the vol down key then it says that it has failed to boot from the sd card Am I doing the right thing???
A little info on what rom I think it has at the moment (original rom)
BTLR 3.1
Rom 4.5.0_0528_FRA_FRA
I have started a different post about this but got no replys so I posted it here
Has no one got an answer to this ??? no solutions?
Hi Brett
I have the same problem with my device that is from the Italian cellphone provider TIM , its italian , however i have tried every trick in the forum here and it fails to boot.
I am looking forward to sort this one out to.Form italian to English thats my game )
tomtokmak said:
I have the same problem with my device that is from the Italian cellphone provider TIM , its italian , however i have tried every trick in the forum here and it fails to boot.
I am looking forward to sort this one out to.Form italian to English thats my game )
Click to expand...
Click to collapse
Paloma wrote: http://www.mediafire.com/download.php?77hl6ni4skf
Download and extract this file, and then copy 850_GAX_SD.bin (hidden) to root of SD card. Plug SD card to PPC and switch device to SD boot loader by holding Volume down button and
click Reset, still holding Volume down until you see card checking.
Sorry about bad English.
You must download it, open it with TotalCommander (or other program with hidden files visibility), copy the file 850_GAX_SD.bin in the root of SD and play!!!
Italian to English
Himmm,
Didn't try that out to be honest , i will give it a try ASAP , but the totalcommander is another software that i need to get i guess in this case.because i tried already the same steps that the regular chinese ASUS owners would do , but unfortunately , the time i get to the step where i do the volume button down and reset , it fails.
But i will give it a go and post what happens and thank you
thank's up ok
Nope, it restarts and fails, what I am doing is downloading from that link you have and taking the 850_GAX_SD.bin file and placing it into the 2577 folder on the SD card along with the Autorun.exe of the Fra (french) rom which i downloaded from the Asus Download section on their website, Is that right? or am I missing out a step
Iv noticed something about the french rom files is named 850_GAX_SD_Enc.bin instead of the others which are named 850_GAX_SD.bin ....is this how it should be?
any Ideas on any of that?
Hi all,
I have a basic question: I ordered an HTC diamond in german language. I had to do so cause my provider only would ship german/italian/french devices. My wish though is to have the HTC diamond running in English.
Will a ROM change install dem WM 6.1 in English too (meaning a ROM includes the OS + all apps) or is there any other way to have WM 6.1 in english instead of german?
thanx a lot for ur help
regards
tom
yeah, i would like to now that too. there are so many roms with ger in the extension, but noone describes how to change the language. I managed to change the language of touchflo into german, but thats all. Help is appreciated
If you want an english ROM, choose a WWE one, stock or custom.
Have a look Here
htc diamond langauge
hi,
I have HTC diamond in danish language, can anybody tell me how can I convert it to english language, or where can I get English firmware Winmob 6.1 pro
thanks
armend said:
hi,
I have HTC diamond in danish language, can anybody tell me how can I convert it to english language, or where can I get English firmware Winmob 6.1 pro
thanks
Click to expand...
Click to collapse
same as FABLIV reply
If you want an english ROM, choose a WWE one, stock or custom.
Have a look Here
__________________
HTC Touch Diamond
ROM : 1.37.406.1 FRE (06/10/08)
Radio : 1.00.25.05
Protocol : 52.29.25.12U
SPL : HardSPL Diamond 1.40.OliNex
Well my problem is a bit more complicated, in fact it's the other way around. I have a WWE ROM installed, but I want my textmessaging to be with a danish dictionary? Is it possible to do this? Or do I have to add all danish word and miss the 3 danish specialities?
Never mind.. I think iI figured it out
Search for '14 languages' cab file, it's easy. Just a reg setting.
Riel said:
Search for '14 languages' cab file, it's easy. Just a reg setting.
Click to expand...
Click to collapse
Yea, I've already found it. But I can't figure out how to install it? I've tried to put the .cab file into Internal Storage > My documents > My files (created folder). Then I've installed it and done a softreset. Nothings happens?
Jesperpoulsen said:
Yea, I've already found it. But I can't figure out how to install it? I've tried to put the .cab file into Internal Storage > My documents > My files (created folder). Then I've installed it and done a softreset. Nothings happens?
Click to expand...
Click to collapse
where is cab files?
petitnoir said:
where is cab files?
Click to expand...
Click to collapse
""""I've tried to put the .cab file into Internal Storage > My documents > My files (created folder)."""""
diamond language change
Hi, can any body provide me with detailed steps how to install english language.
I have downloaded RUU_Signed_DiamProject_V2_5.2.19965_Lite_WWE, but when I try to install the phone gets stuck in 0% and dosent go further
is there any patch that I should install befor running the install file or what els should I do couse I am really stuck with danish language
Thnx
k3vin168 said:
same as FABLIV reply
If you want an english ROM, choose a WWE one, stock or custom.
Have a look Here
__________________
HTC Touch Diamond
ROM : 1.37.406.1 FRE (06/10/08)
Radio : 1.00.25.05
Protocol : 52.29.25.12U
SPL : HardSPL Diamond 1.40.OliNex
Click to expand...
Click to collapse
Yes I am trying to do that with RUU_Signed_DiamProject_V2_5.2.19965_Lite_WWE, but when install starts it gets stuck in 0%, and dosent go further
armend said:
Hi, can any body provide me with detailed steps how to install english language.
I have downloaded RUU_Signed_DiamProject_V2_5.2.19965_Lite_WWE, but when I try to install the phone gets stuck in 0% and dosent go further
is there any patch that I should install befor running the install file or what els should I do couse I am really stuck with danish language
Thnx
Click to expand...
Click to collapse
I have the same problem. Can anyone tell how to solve that problem?
Thanks
One good thing to do is to take a look here it explains all you need to know bout flashing your device =)
Jesperpoulsen said:
Yea, I've already found it. But I can't figure out how to install it? I've tried to put the .cab file into Internal Storage > My documents > My files (created folder). Then I've installed it and done a softreset. Nothings happens?
Click to expand...
Click to collapse
Can anyone upload somewhere the '14 languages' cab file?
Thanks!
Fabliv said:
If you want an english ROM, choose a WWE one, stock or custom.
Have a look Here
Click to expand...
Click to collapse
Pls. Help, I'm a newbie here! could you show me a step by step procedure on how to change my HTC Diamond ROM. bec. I bought a HTC set in Taiwan and some of its features and settings are in Chinese I want it in English. I read that I need to change my rom to do this. could you show me how? Thanks a lot!
Hello Everyone!
I had problems with my Ipaq. It has an italian ROM. So I´d like to flash it with an german ROM. On the HP-Homepage i found an italian and a german ROM. But of course it isn´t possible to use the german version. Couldn't anyone cook or dump a GERMAN ROM for the Ipaq 114? I think here are a lot of Germans who would really really appreciate that.
Many thanks!!!
Thomas Further Informations: Isn´t it possible to overwrite the italian nbf-file with the german one???
Got new informations!!!
Instruction to flash:
1.) You need the german and the italian Rom-update. Both have to unpack on your hard disk!
2.) You connect PDA with the PC, but not with the ac-power.
3.) Start the italian Softpaq. Meanwhile the Update the programm will recognize, that the update does only work with ac-plugged
in.
4.) No you rename the Romfile from the german Update with the name from the italian one and copy it to the folder with the
italian Update
5.) NOW plug in the AC-Power Cable
On this way you bypass the country check - this will be done before the checking of the ac-power.
No ideas???
It must be possible... Here are so many "professionals"!!!
By the way: This is a great forum here. Interesting discussions...
Has anyone experience...
...with the instruction from above???
Thanks for supporting
First, I have to say Hello!, this is my first post in this forum. I own an ipaq 110 classic series with WWE(world wide english).
I'have tried many ways to perform a language change, none of them appears to work, at least in this model. The method described above don't work on ipaqs 110 series, because this model only have a mini-usb port in the bottom end; which supplies data connection and power. Then... How I can "connect the AC power" to the device?. O maybe I'm omitting something.
Sorry about my english, I'm from Spain.
First of all you have to forbid your pda the charging via usb.
Use these settings to do this.
When the software ask, reactivate the settings...
Try it...
Greetings!
Bye the way. My english isn´t better. I´m from germany
EDIT !!!!!
SORRY!
It doesn´t work to deactivate the charging funktion. The problem is, that the pda use just one cable for the datas and for charging.
When you start the rom-update the setup programm automaticly start the charging option. The update starts immediatly...
No chance for overwrite the original language rom-file with the one from - in my case - the german one...
Need help! Please!!! It´s very important for me to have a german system (especially for my software).
additional information: i have a spanish model and i need urgently a german one...!!!!
HELP NEEDED!!!
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
uriazael said:
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
Click to expand...
Click to collapse
T H A T `S I T ! ! ! !
Thanks a lot!!! IT work !!!
Now i have the german version!!
You are the best!!!
Need Help To Change Language On Ipaq 110 Classic
hello everyone
I am going to get an ipaq 110 classic from my friend but it is French version, I have gone through this whole article and understand all the steps to change the ROM update for changing language but please someone guide me "WHERE I WILL HAVE TO PASTE THE "HPImage.nbf"
Also please adv if any other important step to follow?
Thanks
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
If you have some further questions send me a private message...
Greetings ThonaV
Need Help To Change Language On Ipaq 110 Classic
hi ThonaV
good morning, let me try today after getting home, sounds like should be ok now. will keep you posted.
thanks for your reply buddy.
kaled
Need Help To Change Language On Ipaq 110 Classic
Woooooohuuuuuuuu
I Have Got My Ipaq 110 Classic Speaking English!!!!
Thanks For Your Good Support Guys, It Was Not Possible To Do This Change As Hp Customer Support Will Never Provide This Kind Of Information To The End Users (of Course If They Start Providing These Technical Knowledge Nobody Will Buy Their Stuff And They Will Loose Chance To Make More Money)
But Thanks Again Guys For Your Great Help:d:d:d:d
Netherlands ROM
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
I have the actually german based ROM (April 2008) and wondering about this symptom:
Always when I connected my "blank" IPAQ 114 to active sync (sync with local Outlook) "and make" a new partnership - the Time on my PDA is "-9 hours" from our local time.
I test this with other IPAQ 114, with other Windows XP, and other AS 4.5 - always the same problem. If I use an other PDA (HTC Touch HD, Pro, S740) all work fine and the time on this devices are correct...
Any Idea what is the timesync Problem with ipaq 114 and active Sync?
the Language settings, time zones are correct on the IPAQ114.
I found a solution for an old IPAQ 6315 :But is that the really solution?
I found out that this is a know problem by HP. There is no current fix, but they did provide me with a work around. The work around is a 2 step process and both must be done before performing an ActiveSync. If not, the problem will become worse by advancing all the appointments in the host's calander. First, in the date and time properities on the PC, UNCHECk the automatically adjuct clock for daylights saving time box. Second, if the IPAQ is located in Eastern Standard Time, set the IPAQ's time zone to Indiana (IN) as they do not observe DST. If in MST set the time zone to AZ. If in CST set the time zone to Saskatchewan, Canada.
greetz joy
Error message on IPAQ 110...
Hello everyone
I need a little help with my IPAQ 110. I have the WWE based rom on it, but when I'm trying to change it I'm getting an error code 203... & the strange thing is - the SKU ID code on rom & device are the same!!! Do enyone had this problem and how I can fix it???
Thanks
Thanks all,
I have the English changed from German version!! I have Ipaq 2490.
You are the best!!!
DubyDu said:
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
Click to expand...
Click to collapse
It seems that there is very different ipaq 114 Dutch
You can try this ROM but it does not work on mine
ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38994.exe
I change Language to Portuguese. Great topic. thanks to all.
my iPAQ 114 speak poruguese now !!
Sorry my english
can anyone post here the ROM for english ? i can`t download it
thx
Does anyone here have any idea if is possible to update an iPAQ 116 (that is pretty much the same as the 110 and 114) from WM6.0 to WM6.5?
I have one here but I don't even have it's instalation CD. For some reason I can't connect it by USB, just by Bluetooth.
Any help?