Hi!
I just got myself a Diamond and im trying to upgrade it. I've read the following tutorial: http://forum.xda-developers.com/showthread.php?t=416211 but the Upgrading to HardSPL doesnt work for me.
When RUU starts updating, the screen on my phonescreen turns black (as it should do) but at the same time it disconnects from the computer and the program. and the phone freezes and i have to take out the battery and reset it. I've tried to repeat it many times, i also changed the power settings and everything.
I have ROM version: 1.93.413.3 SVE and Radio: 1.00.25.05 and Iam trying to update to SwiftBL
Thank You
After your screen turns black, don't flash the SPL yet.
Wait a while till you pc detects the "new" device and installs drivers for it.
If you have still troubles, PM me and we can do it together ...
sum1 help me out plz
oryt mate
sorrry to bother u
erm im on vodafone wiv the vodafone rom thing and i tried puttin a different rom on but it does'nt move past 0%
so i tried that olinex thing and thats not helpd either
stil stays at 0%
any tips? let me knw please
thanks
I have the same problem as stated above..
Screen turns black..
Phone gets disconnected from pc..
Windows is found a new hardware device and is asking for a hardware install..
Hardware Install Fails and phone remains disconnected with a black screen..
WHAT TO DO NOW..?????
I'm afraid of disconnecting my phone, because of the chance ending up with a brick.
Can someone please help me out..???
It happened to me before. For me it was due to the advanced battery setting.
I resolved it by unchecking "turn off device if not used for.." on both battery and external power. Hope this helps.
Nope this does not help..
My phone goes black and dissconnects from the pc and does not reconnect..
Get a connection error from the hardspl update program and have to remove battery to restart phone
Doe anyone have an idea what i am doing wrong..???
I have the same problem. and i have tryed everything...almost:S
Thank you all!
Thank you all for the quick replys,
I've found a solution to my problem.
First of all i unchecked all the battery saving options, and then i went to Settings--> USB to PC--> and uncheck the "Enable advanced network functionality" box, after this the upgrade worked.
Hope this works for you guys 2
Peace
Not working for me here . Htc Diamond from H3G ITA .
I can't get past the black screen . Activesync disconnects and never connects again ... I tried the 2 settings changes proposed here ; I tried waiting almost 10 minutes on the black screen ....
Any other ITA H3G user with the same problem (maybe solved....) or any other user that got away with this huge problem ??
Have you tried pasting SSPL-Manual.exe into Diamond's Windows directory and executing it?
I put it in the root and executed it .... screen went black ... activesync lost connection ....................... after 20 minutes still black screen and nothing happened .
Fortunatly unplug battery and restart got me the pda back working
PS. If I enter the multicolor screen I see as SPL 1.37.0.0 and above it says DIAM100 ..... if any of this info could help to get me more help
don.sina said:
Thank you all for the quick replys,
I've found a solution to my problem.
First of all i unchecked all the battery saving options, and then i went to Settings--> USB to PC--> and uncheck the "Enable advanced network functionality" box, after this the upgrade worked.
Hope this works for you guys 2
Peace
Click to expand...
Click to collapse
Worked like a charm for me
Thanks
grebbo said:
I put it in the root and executed it .... screen went black ... activesync lost connection ....................... after 20 minutes still black screen and nothing happened .
Fortunatly unplug battery and restart got me the pda back working
PS. If I enter the multicolor screen I see as SPL 1.37.0.0 and above it says DIAM100 ..... if any of this info could help to get me more help
Click to expand...
Click to collapse
I believe that is what will happen. I used this method to install 1.40.
After you get the black screen just follow instructions from step 2 in here:
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
Ignore the activesync turning green part.
The small words in the red box is easy to miss out.
had a similar problem...upgrading to the latest version of .net CF did the trick for me....u might want to check that out (nothing to lose in having an updated version anyway)
Tnx a lot catpuke ... I tried to run the update anyway even with no sync with pc .... it stayed to 0% for a little bit and then jumped to 100% .... now in tricolor shows 1.30 Olinex !
Will move on and try to update radio now !
Tnx again for the help
Related
hello
i am trying to install this rom : Helmi UNI AKU3.5 ROM
First i dont know if is normal,but it is installing really fast,the precentage is going up like 5-6% every 10-15 seconds,and then when it is succesfully finished i reboot the device(take out the battery) and i get nothing on the sceen,it just says "Serial" or if i put the usb cable it says "USB",what should i do?
please help guys, i have tryed to install like 5 different roms,and all it does is shows me that it has successfully updated and then all i see is "USB" on the sceen on the universal. what is happened?is my phone dammaged?
Yes tht norm, after its 100% dun dnt take the battery out? [who told u 2 do tht] hard reset ur uni thn wait.... enjot
I ment enjoy
man,read wiki! there is section for stucked on btloader screen
1: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen
2: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen%20%28UNI_exitbootloader
3. maybe U will need to upgrade btloader:
http://wiki.xda-developers.com/index.php?pagename=Upgrade%20bootloader%20from%201.00%20to%201.01
i installed the rom,it successfully upgrades,i do a hard reset,it asks me to press 0 for factory defaults or x to exit,whatever i press it goes back and says "serial" or if i connect the usb it says "USB",the mobile is not booting into the OS.
wow that was so scary,i just got the phone like 5 hours ago!!!it did get unstucked,i think i fixed it,i am haveing problems getting a signal now , lets see whats going to happen now...
go 2 phone settings and check if u've got correctly set gsm type(900/1800/1900) u may contact me thru icq 82511292
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
I have posted this in another thread but noone seems to be able to help or have seen this message.
But I hope some of you can give me some kind of help so I can rescue my Touch Diamond.
I really need your help so I cand send my phone to repair on my warranty.
My Diamond is "almost" dead and when it´s connected to the batterycharger, the phone reboots allt the time, but I can access the Bootloader, and it´s the ONLY way I can have contact with my phone.
Power on won´t start my phone and with the batterycharger the text " Touch Diamond" shows upp and then reboots again and again.
But I can enter the Bootloader.
(The last cooked Rom was a beta from udk which worked satisfied. Downloaded and installed on my Diamond in November.)
I have succeded (?) to update the ROM with the official 1.93 Swedish ROM, made by HTC for the Swedish operator 3 via BOOTLOADER beause it seems to install to 100%.
I have no way to check it...had to belive that the 100% indicator was right.
Then I entered the Bootloader (only way for me to get some access to the phone) and tried to install the stock 1.93 spl found in post 20 in this thread:
http://forum.xda-developers.com/showthread.php?t=400411.
Same there: 100% is shown after install, so I thought it should work.
After install, I enter the Bootloader (tricolor) again but the text still says:
Security Unlocked
Diam100 MFG 64M
SPL-1.40 OliNex
MicroP.Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have also tried to install 1.35 spl in that post with no luck!
Do you know why it won´t show the stock spl I tried to install but shows only the hard.spl 1.40 after I tried to change the spl??
Is there another stock SPL I shall install?
I have Sim unlocked my Diamond couples of month ago with the Diamond Unlocker program.
Is my phone a brick now or can I do something so I can use my warranty?
Hope someone can help me!
Thank you very much!
Anyone?
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Method of install SPL is diff, then rom/radio.
Riel said:
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Click to expand...
Click to collapse
I just tried this and it did´nt help.
When connected to the battery charger, the phone indicates it charge for a couple of seconds, then the start/reboot thing occur again.
But the ring around the D-pad did´nt glow anymore like it does when the phone being charge.
However: I let the phone be connected to the battery charger for 5 hours, then tried to start the phone, but the phone did not react when it had no power source.
But when I have the phone connected to the charger, the phone ony starts with "Touch Diamond" on the screen and then reboots.
During the restarts I can access the bootloader.
I also tried a new and fresh battery from my friends Diamond but same problem occured. The phone wont start.
mondilv said:
Method of install SPL is diff, then rom/radio.
Click to expand...
Click to collapse
I tried to change back to stock SPL - after I had installed stock Rom -by entering the bootloader (the only way I can access my phone) and started the update for SPL. The indicator showed it was updated to 100%.
But when I look at the tricolor screen it still shows I have Olinex 1.40.
Have I made something wrong when I tried to install stock SPL? The installation indicator during the install looked normal.
Can I have problem to install the stock SPL mentioned in post 1, because I have not a WWW- Rom? I had to reinstall the original ROM for the Swedish operator 3.
Really hope someone can help me out so I don´t need to trash my phone into the garbage.
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
Hey guys, I've been looking for answer for my problem for several hours without any luck. When my phone is not plugged to USB it won't even start in bootloader mode nor the hard-reset works. When I plug it to USB then it starts in bootloader mode says Upgrade ROM code error Please try again. This screen shows only for about 2 seconds and the phone restarts itself and does the same over and over ... I'm getting desperate. Does anybody know what to do with this issue?
Am also having the same problem since yesterday. My HTC Diamond touch2 had the wm6 from htc..the battery was after every 9hrs dead so i decided to flash the "shania" rom which many says is better. The installation was all fine and shania started.I removed the Batt to put the sim-card and restarted the Phone. It did`nt start and now it gooes on and off with the bootloader tricolor and says "No Image". No access to pc due to "on/off" state. Please Help
No one can Help???
Have also tried to flash using an sd-card without success. The phone does not even charge itself. Please S.O.S
I have a similar problem on my Rhodium (tilt2). Been reading around on and off for a couple days now and have come across a couple possible solutions. I'm still experimenting with my phone.. going to poke around with mtty on my roommate's PC later today. I'm still searching the xda threads (which led me to this post) so I'm sure there is a solution which doesn't involve a service center or warranties. I did read one post about charging the battery in another HTC device and then re-flashing yours with the fully charged battery.. but I don't have that option myself.
cafecz said:
Hey guys, I've been looking for answer for my problem for several hours without any luck. When my phone is not plugged to USB it won't even start in bootloader mode nor the hard-reset works. When I plug it to USB then it starts in bootloader mode says Upgrade ROM code error Please try again. This screen shows only for about 2 seconds and the phone restarts itself and does the same over and over ... I'm getting desperate. Does anybody know what to do with this issue?
Click to expand...
Click to collapse
Do you have hard-spl and what model of diamond do you have,cdma or gsm?
HELICOPTER88 said:
Do you have hard-spl and what model of diamond do you have,cdma or gsm?
Click to expand...
Click to collapse
I'm sure I have GSM phone. I have HTC Diamond Touch P3700. I sucessfully installed Hard-SPL Olinex 1.40. But then I read there might be some problems with 1.40 version so I tried to downgrade to 1.93 and then this ON/OFF problem started.
cafecz said:
I'm sure I have GSM phone. I have HTC Diamond Touch P3700. I sucessfully installed Hard-SPL Olinex 1.40. But then I read there might be some problems with 1.40 version so I tried to downgrade to 1.93 and then this ON/OFF problem started.
Click to expand...
Click to collapse
a lot of time ago i read about upgrading from 1.40 to 1.93 and there was some problem,i don't remember where i read it,i'm not having any problem with 1.40
ok, later i also found out that 1.40 i fine. But it doesnt solve my problem right now. Any suggestions?
Bootloader´s "On/OFF" Solved
I cant believe it...my phone is breathing again..
Somehow I had the feeling that the phone wasnt charging at all. i also read in a forum that one should try to charge the batt in another device but i knew no one with my model..and this is what i did..
1) Connect to pc through USB
2) removed the battery from the phone
3) walla....Bootloader doesnt go off..USB sign shows..a smile on my face...puh!
4) Withought wasting a second I flashed the win6.1rom from my pc
5) Phone goes off ready 4 restart..I put the batt back, waits for it to charge for some minutes and startet the phone..walla...there it goes.
Hope this helps someone