not sure, i just got this phone, but when i linked my motorola bluetooth headset to the dash, it only worked when i made outgoing calls, but incoming the calls went through the phone still? any ideas how to fix this?
Start using the search feature on the top bar
Look here
drifterrolly said:
not sure, i just got this phone, but when i linked my motorola bluetooth headset to the dash, it only worked when i made outgoing calls, but incoming the calls went through the phone still? any ideas how to fix this?
Click to expand...
Click to collapse
Is it a stereo or mono headset?
In either case make sure it is set as your default hands free device - go to connection manager, select menu > bluetooth > your headset > settings > set as handsfree
I had too many problems with my old Motorola Mono BT so I finially got a new one ( Jabra BT8010 )
Related
1. Is it possible to have the BT headset announce incoming calls but still have the phone ring with Voice Command 1.6?
Seems like it's an all or nothing deal so far... either ring and announce through the BT headset (by selecting "Announce Incoming Calls") or ring and announce through handset... Notifications work fine though. The handset would play the alert then the BT headset will announce the reminder. (See here for more details.
2. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..
I have a HTC Touch Dual.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
Hi, I have a Bluetooth speaker on my visor, I pair it with my Z. When I am driving & select & dial a contact it goes via the Bluetooth speaker & I can hear them & I can talk to them. However when someone calls me when my Bluetooth is connected I can answer it via the phone or the Bluetooth Speaker but I then have to manually press the "speaker" icon (to the bottom right of the contact picture) & select the bluetooth device so people can hear me. Is there a way of defaulting the phone to "BT Speaker" (or any Bluetooth device) when the Bluetooth is connected? Thank you, I've searched but didn't come up with anything! http://forum.xda-developers.com/search.php?searchid=57383234
Not sure this helps
When I pair it with my bluetooth headset, I have to press the answer button on my bluetooth to hear sound or anything on my bluetooth headset
If I press the answer key on my phone, it would just work normal like it didn't connect to bluetooth( using the speaker on the phone)
So I guess if your bluetooth speaker has some kind of answer key, you would have to press it for it to using it by default
Sent from my HTC Vision using XDA App
Ah yeah, I wondered that too as it was one of the first things I had a look for but it still comes through the phone until I manually "change" the speaker, it must be my bluetooth speaker that's causing it if what I'm trying to achieve works on yours. Thanks for your reply!
I have a Samung BT earpiece HM 1500. When I receive a call, the voice of the caller comes out of the earpiece & the phone simultaneously, & ofcourse it'd be so low on both. I then disable BT on the dialer & re-enable it, then the voice comes out of the earpiece only & in great quality. The same thing happens when I connect the phone to my car BT set aswell, so the issue is related to the phone & not the BT sets.
Any solution to this ?
Ok....so it is video caller id that was doing the mess....removed it.....everything back to normal