1. Is it possible to have the BT headset announce incoming calls but still have the phone ring with Voice Command 1.6?
Seems like it's an all or nothing deal so far... either ring and announce through the BT headset (by selecting "Announce Incoming Calls") or ring and announce through handset... Notifications work fine though. The handset would play the alert then the BT headset will announce the reminder. (See here for more details.
2. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.
Related
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..
I have a HTC Touch Dual.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
I have the i-mate JASJAM (i.e. Hermes) which has A2DP. I bought the Jabra BT8010 stereo headset with headset profile and stereo profile. When I pair the two, every sound from the phone automatically gets transferred to the headset, which means the phone doesn't ring because the ringtone is also transferred. If I don't have the headset on I don't hear the phone ring.
I spoke to Jabra, they said I have to configure the phone somehow because the headset "just accepts whatever the phone sends".
Any ideas?
hey, same problem here
i have tried a few A2DP headsets(from other manufacturers)and with all of them the ring is streamed to the headset!
can any one help?
Are you kidding me? that's just one of the best things. How else do you know when you have a call when listening music? And why leave the headset paired when you don't use it? if you don't listen to music don't switch on the headset.
I don't always have my headset on my ear, I want the phone to ring. If the headset is disconnected, the phone doesn't always transfer an existing call to the headset if I turn on the headset only after the call has started.
So, I want to know if there is a way not to transfer the call ring (and all other device sound besides the call itself) to the headset...
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
imaginarynumber said:
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
Click to expand...
Click to collapse
yeah, it just keeps ringing in the headset only
I would also like to know how to make the phone ring when the head set is plugged in.
I don't always have the headset in my ears but still want to hear the phone ring. There must be a setting to allow this somewhere.
Any ideas?
exact same problem here
using a htc mozart .. my bt head set picks up all sound, not only music and convo.. so i dont hear if someone calls me unless i wear my headset in my office at all times or turn it off with the need to turn it on (waiting forsync) whenever someone calls me...
thats absolutely stupid, who is the numbwit at Microsoft that got that idea?
actually the sounds (and lack of profiles realy need some work) im using this phone as a 3g business phone including mail, and evrything else..
now im also using the alarm feature but guess what you cannot make it "alarm only" you have to accept all the stupid notification sounds if you want to hear the sound of the alarm.. or like me disable the notifications from t.ex mails to avoi being woken up at night from that.. its so lame.
i can see that a low of features could be refactored on modern dauy phones.. but the win 7 mobile realy disnt do the job (yet).. i would rather wait for office support if i could have profiles..
another realy lousy thing is that you have to buy office 2010 including outlook to sync contacts ..older versions DONT work
I'm sorry if this has been asked in the past, but I was wondering what happens to your navigation screen when a phone call comes in or when you need to place a call? Now it would be nice not to be doing several things at one time, but if a call comes in while you are trying to navigate, doesn't the call menu come on screen? How do you suppress that? Just wondering as I am looking to get a TP2 via AT&T. Thanks.
Dunno about other kit, but my copy of TomTom6 produces a popup on my iPAQ hw6915, and all I hace to do is answer the call (I use a BT headset with it when driving to stay roadsade as much as possible). The voice directions from TomTom remain muted while the call is in progress, by the way.
hi
While using GPS (GARMIN XT), the phone screen appears in case of incoming call.
I always use my bluetooth earphones while using GPS.
GPS voice will be thru the speaker and call on bluetooth.
After the call, the screen turns back the the GPS view automatically.
Hi,
I wanted everybody to be aware of this issue.
When you use a Jawbone Prime with TouchPro2, on every other handset, you can disconnect the call on Jawbone by pressing the send/end key on the Jawbone.
This function of using the end key on the Jawbone does not work on the Telus TouchPro2.
I have gone through troubleshooting with Jawbone, still have same issue.
HTC sort of seems to be aware and will not troubleshoot.
Telus Data support were useless, no troubleshooting.
I believe this may be just an issue on Telus model, HTC was not aware of issues with T Mobile version or European versions.
I will also post to PPC Geeks and XDA developers as well.
Does anyone have a solution/reg edit that will solve this issue?
Dave
same issues w. verizon tp2 and jb prime
verizon tp2. unable to end call from jb prime. voice command, volume toggle, last call commands all work from jb prime. Just can't end a call from headset...
VZW TP2 has many BT Handsfree Bugs
Have similar problems with 2 Motorola headsets and Jawbone on VZW TP2. BT Handsfree has many issues --
1) cannot end calls from headset
2) cannot consistently access voice command.
3) Voice command reads sms and email headers aloud over the handset speaker when set to speak to BT headset only.
4) Dialer touch tones come out of phone speaker instead of headset.
5) Touch screen numeric pad goes blank after ~1minute on a BT handsfree call.
6) And then there is the irritating alert that BT headset disconnected so I should put the phone to my ear -- as if I didnt know I shut the thing off myself or could no longer hear a call! I wish at least that alert could automatically clear after 5 seconds.
I filed a support request for 1-5 with VZW earlier today. Forgot about #6 until moments after I ended the call and turned off the headset. VZW rep gave me HTC Tech Support phone number. Will call them Monday AM!
I had no issue using the JB2 on TMO. I just ordered the JB PRIME and i am helping its the same.
I'm having the same issue with the HTC Ozone. No call/end button, no redial, and no voice command. However, if I reboot the phone, everything works just fine! But then, almost at random, it just stops working again... Any ideas??
If this is anything like my aging Hermes I wouldn't expect a fix from HTC ever
Its depressing to know 3 years later it still seems impossible to get a phone with working ms vc and the kicker is this phone comes with it.