I have a dutch ROM. I cannot find how to record voice dialing commands, moreover, the manual does not mention anyting about it.
What's up??
Voice dialling
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
It works. Voice Command gets to the one hardware button assigned that's configurable. Just hold the Call button until u hear a beep.
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
Another problem is that I use it on my bikehelmet when driving. But on the TP2 you need to hold the call button 3 secs (using Voice Command). That turns my bluetooth communication system off. xD
On my previous phone Xperia X1 I could assign a button without needing to hold it for 3 seconds. That worked for my bikesystem.
Google voice2go
Cyberon Voice speed dial is the best for the job but didnt try it yet. Dunno compatible with broadcom/widcomm stack if using btooth hfree. anybody tried it ?
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
tornado said:
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
Click to expand...
Click to collapse
Can you post a download link for this software? Thanks
Pimmr said:
Can you post a download link for this software? Thanks
Click to expand...
Click to collapse
see link in http://forum.xda-developers.com/showthread.php?t=523114
MS Voice Command works gr8 at least when i talk to my phone english
you have to buy the voice command software...
terryd1980 said:
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
Click to expand...
Click to collapse
you have to buy the voice command software from Microsoft, its about $39.00. None of the foreign phones came with bluetooth voice command software...
Yes MS voice command works like a charm on TP2
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
The Telus version of the Touch Pro2 comes with Voice Command 1.6.21052 in ROM
terryd1980 said:
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
Click to expand...
Click to collapse
after reading your post sent a question to HTC...cut a long story short they tested MVC on a TP2 and through the BT headset succesfully activated a command... when i first contacted they sent the following cab and suggested i install ... so this may help
CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB
did not buy because of this post but according to HTC the profile does work on TP2 so back on final list after my 1st choice the B7610 is pushed back to Oct launch
Due to speaking to HTC support who said they had voice over BT headset working on TP2 brought one and low and behold it does not work ... not happy
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
ChriX84 said:
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
Click to expand...
Click to collapse
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
hecksk said:
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
Click to expand...
Click to collapse
I emailed in detail about this problem. Mentioning that Voice Command only works on the phone itself by holding the call button for 3 secs. When using the bt handsfree set the handsfree set turns off when holding the button for 3 secs on it. While it works perfectly on my old Xperia X1 (wich is made by HTC too). With 3 different bt sets. No holding buttons for 3 sec. But only by shortly pressing the button.
Hopefully they answer with good news.
guys, I have an idea: what if we use AEB button plus to map voice command to one of the vol key-long press or double press for example, and then we see if the BT headset is capable of invoking it using its own volume keys? dunno if it's clear enough...
you might try it, so no long press on power button of the headset or so...
the other problem: even if my strange idea would work, I dunno if then the TP2 / voice command would listen to my commands through the BT headset.. but it might be worth a try
this absence of voice dialing and all this problems are driving me mad
cheers!
Can someone confirm if MS Voice (UK) works on the TP2?
When I installed this on my Diamond, it f***ed up the phone and required a hard reset .... twice! Once I thought it was my fault, but I did it again to make sure, and no it was the phone!
It worked great on my previous phone, but I've just got this one the way I like it, and would not like to have to reset everything
I have the TMoUS TP2 that came with MSVC preinstalled and it works perfectly with my Motorola S9 headset via BT.
Maybe try to get the version in the TMo ROM?
S
After getting my US TMo TP2 last month I've been pretty sure everything Bt was working properly.
Giving commands is 100%, I can touch the call button on my Moto S9's and say Dial <contact>, or Dial <555-1212> or What are my appointments tommorrow?, etc. and it works great.
I thought notifications were working as well. Calender appt. announced via my S9's and the text to speech was impressive as it read them out to me but something was missing and I just realized what it was. Incoming phone calls were not being announced properly. I did hear it ring and I could press the headset button and take the call just fine but it was the default S9 ring not my ringtone and I did not hear VC announce the number or contact. I was having to look at the phone to see who was calling.
So I went searching XDA and found this post that has just about everything you need to know about MS VC. After reading thru it thoroughly and trying many of the settings and reg tweaks I found out how to make VC announce incoming calls but it will only do so thru the device speaker an not thru Bt Handsfree. I've tried everything in that post that might help but to no avail.
Any one here have any idea?
S
Microsoft are working on it apparently.
Hi guys, hope you can help with an odd problem...
Very, very occasionally (maybe 1 in 50 calls) I get an issue where I can't hear the other party, as if the earpiece was dead. If I drop the call and re-dial, 99% of the time everything is fine. (I think I had one time in 6 months where the 2nd call did the same.)
Now, I can't decide if this is a network issue (Vodafone) or a phone issue. I mostly use a Bluetooth headset due to the size of the Note but I doubt it's headset related as I have tried two different high end brands and it happens with either.
Things I have noticed:
Problem applies to incoming AND outgoing calls
I have checked I haven't accidently muted the call
My Bluetooth headsets all chime at the start of a call but there is no call audio
The other party can hear me but I can't hear them
System sounds are all fine, only call audio is affected
Switching between headset, phone and speaker phone make no difference
Applies to all incoming call audio, including ringing tones and busy tones
I reboot my phone sometimes but as the issue is rare I couldn't say if it makes a difference. Also this is a standard Note II (not a branded Vodafone one) with all the latest patches downloaded. Looking through my app downloads I can't see any obvious ones that might affect the phone. Apart from the stock Samsung apps I most connect to CCTV systems. I have CSipSimple but I haven't used it in ages.
Any suggestions on how to investigate this further?
Regards,
Andy
Seriously... no ideas?
So, no one's ever had this problem and no one has any ideas?!
:crying:
I'm currently using an LG G3 Vs985 on Sky Dragon 5.0
I'm also using T-mobile on the LG G3
I use my phone for work a lot and the most annoying thing is happening. While I am using my bluetooth headset and talking on a call, if somebody tries to call me and my screen is telling to either accept or deny the incoming call, my bluetooth speaker drops to handset volume. I have to deny the incoming call, then quickly tap to turn off bluetooth and bluetooth again to get the call back to my bluetooth.
While already on a a call if somebody is talking to me while an incoming call comes in, I miss an entire sentance or two before i can do all of the above to get the audio back to bluetooth.
Is this a wrong setting I have on the phone or simply a bug with either Lollipop or Skydraggon?
"Edit" I got so annoyed I went to my wired headphones and I noticed the issue is not happening on my headphones. I didn't expect to happen but i wanted to note that the audio does not drop to handset speaker while using wired headset.
I appreciate the help.
I wanted to update the post that either it was a phone reboot or possibly of me flashing the Skydragon 4.2 kernal to the phone that fixed the issue. So far as of right now the audio is not dropping when talking or listening on an active call with another incoming call requesting to be accepted or denied.
Edit: The issue has returned. This is goofy !! lol
We finally have our watches updated with the long waited 1.4 internal speaker enable firmware.
I was so excited to side-load the update to my watch and seeing the new features activated, but with more usage to the watch/phone (note5) I started getting frustrated.
Phone calls cannot be received (heard or voice out) from phone if bluetooth (Play phone audio on watch) is selected. (unlike my previous iWatch)
2nd flaw is the strange behaviour using Facebook messenger calling when audio is diverted to watch, but this time the calls fail.
I thought i would see if its only me facing this, is it the combination of my phone/ watch misfit? or its the update?
I have already factory reset my watch, to no avail.
Please share your experiences guys.
For me this works super cool, no problem. Speaker is very loud and clear. I use it 50% volume at home, whitch is enough.
taiseer999 said:
Phone calls cannot be received (heard or voice out) from phone if bluetooth (Play phone audio on watch) is selected. (unlike my previous iWatch)
Click to expand...
Click to collapse
When you accept phone call on a phone voice is automatically directed through phone's earpiece. When you accept it on the watch, voice goes through the watch.
You can also switch voice direction during call using button having BT icon within in-call screen. This is how it works for me on Nexus 5x and I find it quite consistent.
C3C076 said:
When you accept phone call on a phone voice is automatically directed through phone's earpiece. When you accept it on the watch, voice goes through the watch.
You can also switch voice direction during call using button having BT icon within in-call screen. This is how it works for me on Nexus 5x and I find it quite consistent.
Click to expand...
Click to collapse
Unfortunately answering the call from the screen doesn't activate the ear speaker in my case, but I can activate the loud speaker!
Sent from my SM-N920C using Tapatalk
taiseer999 said:
Unfortunately answering the call from the screen doesn't activate the ear speaker in my case, but I can activate the loud speaker!
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Answering the call from the watch screen will answer on the watch. To me that is as expected. If you want to answer it on the phone use the phone to answer instead of watch.
Sent from my Nexus 6 using Tapatalk
I guess it's dependent on a device type, Android version it is running and most importantly a dialer app that it is running.
I can imagine devices having custom dialer supplied by a vendor that significantly differs from the standard Android one could yield different results.
Anybody else encountered FB messenger crash?
I'm facing very serious problems while trying to use HWatch to make/answer calls.
1. Without activating "Play phone audio on watch" everything works as before (no way to answer the call without pulling the phone). Somehow expected behaviour.
2. When I activate "Play phone audio on watch", I can answer the call on watch and apparently it thinks the call is going normally. Byt nothing can be heard on either side of the call. On phone the in-call UI is also displayed and no sounds played or recorded.
3. What's even worse, when I conventionally answer the call on my phone, it's somehow answered also on watch, with result being similar to 2 - no voice whatsover on either device - for about 10 seconds. After that the call is hung up on watch and starts to be hearable on phone. This is very annoying.
I admit, I have an old Samsung Galaxy SII running SlimKat 4.4.4 (which should include standard AOSP dialer). Maybe it has an old version of Blutooth or something screwed elsewhere. But for me the new 1.4 functions are now plain unusable.
Edit: Point 3 somehow fixed (or demonstrates randomly). But still: no audio stream between phone and watch.
nalott said:
I'm facing very serious problems while trying to use HWatch to make/answer calls.
1. Without activating "Play phone audio on watch" everything works as before (no way to answer the call without pulling the phone). Somehow expected behaviour.
2. When I activate "Play phone audio on watch", I can answer the call on watch and apparently it thinks the call is going normally. Byt nothing can be heard on either side of the call. On phone the in-call UI is also displayed and no sounds played or recorded.
3. What's even worse, when I conventionally answer the call on my phone, it's somehow answered also on watch, with result being similar to 2 - no voice whatsover on either device - for about 10 seconds. After that the call is hung up on watch and starts to be hearable on phone. This is very annoying.
I admit, I have an old Samsung Galaxy SII running SlimKat 4.4.4 (which should include standard AOSP dialer). Maybe it has an old version of Blutooth or something screwed elsewhere. But for me the new 1.4 functions are now plain unusable.
Click to expand...
Click to collapse
Well I am somehow facing same issues with my GN 5 with the latest MM, in addition to crashing of FB messenger... Line and other voice calling apps are running fine.