hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..
Related
1. Is it possible to have the BT headset announce incoming calls but still have the phone ring with Voice Command 1.6?
Seems like it's an all or nothing deal so far... either ring and announce through the BT headset (by selecting "Announce Incoming Calls") or ring and announce through handset... Notifications work fine though. The handset would play the alert then the BT headset will announce the reminder. (See here for more details.
2. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.
I have a HTC Touch Dual.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
I have the i-mate JASJAM (i.e. Hermes) which has A2DP. I bought the Jabra BT8010 stereo headset with headset profile and stereo profile. When I pair the two, every sound from the phone automatically gets transferred to the headset, which means the phone doesn't ring because the ringtone is also transferred. If I don't have the headset on I don't hear the phone ring.
I spoke to Jabra, they said I have to configure the phone somehow because the headset "just accepts whatever the phone sends".
Any ideas?
hey, same problem here
i have tried a few A2DP headsets(from other manufacturers)and with all of them the ring is streamed to the headset!
can any one help?
Are you kidding me? that's just one of the best things. How else do you know when you have a call when listening music? And why leave the headset paired when you don't use it? if you don't listen to music don't switch on the headset.
I don't always have my headset on my ear, I want the phone to ring. If the headset is disconnected, the phone doesn't always transfer an existing call to the headset if I turn on the headset only after the call has started.
So, I want to know if there is a way not to transfer the call ring (and all other device sound besides the call itself) to the headset...
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
imaginarynumber said:
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
Click to expand...
Click to collapse
yeah, it just keeps ringing in the headset only
I would also like to know how to make the phone ring when the head set is plugged in.
I don't always have the headset in my ears but still want to hear the phone ring. There must be a setting to allow this somewhere.
Any ideas?
exact same problem here
using a htc mozart .. my bt head set picks up all sound, not only music and convo.. so i dont hear if someone calls me unless i wear my headset in my office at all times or turn it off with the need to turn it on (waiting forsync) whenever someone calls me...
thats absolutely stupid, who is the numbwit at Microsoft that got that idea?
actually the sounds (and lack of profiles realy need some work) im using this phone as a 3g business phone including mail, and evrything else..
now im also using the alarm feature but guess what you cannot make it "alarm only" you have to accept all the stupid notification sounds if you want to hear the sound of the alarm.. or like me disable the notifications from t.ex mails to avoi being woken up at night from that.. its so lame.
i can see that a low of features could be refactored on modern dauy phones.. but the win 7 mobile realy disnt do the job (yet).. i would rather wait for office support if i could have profiles..
another realy lousy thing is that you have to buy office 2010 including outlook to sync contacts ..older versions DONT work
Hi guys,
Trying to find solution for the below.
When i plugged in my handsfree,then the sound for incoming calls and sms notifications always played only through handsfree, so i missed many calls.Is there a way to play these notifications through speaker (of course with handsfree plugged in)?
Thanks a lot
That means I must forget my hands free?cm7 had option to play all the sounds from speaker,so this is a tweak?
Just got the Note II and am trying to get the phone to ring through a bluetooth media speaker. When I am selecting different ring tones they will play through the bluetooth speaker as well as through the phone, but when the phone actually rings it will only ring on the phone itself. I have searched through various forums and can't find anyone asking the same question. I've also tried looking for an app that will route the audio to the speaker, but no solution yet. Has anyone any ideas please?
Search for Soundabout in the app store. I use it and can route my Bluetooth sound, media and phone, to wherever I want it
sent from somewhere
Thanks for that, I'm trying it but at the moment I can get everything to play through the bt speak, apart from when the phone rings.
Make sure, in the Bluetooth settings for your speakers, that media and phone are connected. I have the phone ringing through my Bluetooth audio
sent from somewhere
My bluetooth speaker settings only have the option to use it for media audio, and not for phone audio. With my bt headset I have the option for both phone and media audio. I'm assuming that the phone ring is coming through as phone audio. The annoying thing is that every other sound will come through on the speaker, key presses etc, and the ring tones when I am setting the volumes, but not when the phone actually rings or when messages come in.
With SoundAbout there is no option for the phone call audio to be sent to an A2DP bt device, so I think I'm stuck there as well.