hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..
I have a HTC Touch Dual.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
Hi,
I am having problems with the HTC One X and my car kit. It connects ok and allows outgoing calls no problem. However incoming calls were automatically answered (worked out it is the stock installed car mode),and a message played to the caller "the person you are calling is currently driving". After that, it is not possible to connect to the caller.
I have now disabled the car mode app and done a hard reset. The phone now still works for outgoing calls. It works for incoming calls, provided it is not plugged into the charger.
If plugged into the charger (cig lighter with non-HTC usb cable),hitting answer (whether on phone or car kit) picks up the call and then the audio goes silent after about 2 seconds. The call can then only be recovered by selecting the audio out as handset, and then re-selecting the car kit. After doing that, everything works fine (provided the caller hasn't hung up in the meantime!).
Has anyone else had similar issues? Any ideas are welcome.
I have tried installing no dock and a tonne of similar apps to no avail.
I have tried enabling the car mode app and answering calls through it (but does the same as above - 2 seconds of audio then audio goes until carkit disconnected and then reconnected during call).
I am running a stock phone, not rooted, with 1.26. I am not encrypting the storage or anything else (I notice there have been threads about enryption and bluetooth problems prior to 1.28).
Thanks
TS
You may have solved this by now but I had a similar problem with my One S. It turned out not to be the phone at fault.
In my case the phone would ring once then fall silent and the car audio would go silent while the incoming caller received the message that I was driving. I had not changed any of the settings on my car so assumed that the phone was at fault.
After trying to change phone settings I had a look at the settings for the Bluetooth on the car, where I found a setting for placing calls on hold. I found that this was set on automatic so I changed it to manual and everything worked properly.
What had been happening was that all incoming calls were being put on hold, which is why the incoming caller received the "driving" message. The caller was actually connected but on hold and if I had pressed the button to swap between callers on hold I would have been connected.
It appears that the setting had always been on automatic but my old phone didn't use the automatic call hold function, which is why I only had the issue when I changed to the One S.
Hope this helps.
Hi,
I'm looking for a physical, external phone call indicator. I would like the device to flash light and/or play sound when the phone rings as the standard phone ring is sometimes impossible to hear.
There's plenty of bluetooth speakers that also ring and you can use them as handsfree, but I don't want the handsfree portion - just a device that will notify when there's a call incoming, but will later allow me to have the conversation through the phone itself.
Is that such a device available?
Or maybe there's a way to configure the BT speakers so they only notify of an incoming call, but do not route the call through themselves?
When in any call - voice or video or whatsapp call - the other party can't hear my voice IF I OPT FOR SPEAKER MODE AT MY END.
It is quite irritating. Either I have to use earphones for such video calls or simply disable speaker n use only the ear piece (avoid video calls).
No hardware issue - all the microphones n speakers working fine. It is only a software issue. Waiting for a solution.....