Develop Bugs

Can I go back?

I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.

I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.

euth said:
I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.
Click to expand...
Click to collapse
Yes. You can go back to WM5 from WM6. I have done it before with no problems. Your answer is once again yes!
I will not flame you but look harder.

wildbilll said:
I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.
Click to expand...
Click to collapse
I am feeling kind tonight!
Look here:- http://www.mrvanx.org/cms/

You two rookies need to stop by:
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
Hope the hint helps

Oh dear
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
And the gurus have used plain english too! wow!

...but just to let You know..
once You go black (2.5 ), You will never go back...

hi there
first of all, I am no expert in the ROM related knowledge, but i did go back to WM5 from WM6 recently. The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Besides, i don't mind to share my experience for downgrading to WM5, the following is my up and down sequence.
1. upgrade from Dopod WM5 rom to WM6 cooked rom
2. upgrade to SPL 1.40
3. upgrade radio to 1.38.00.11
4. upgrade radio to 1.40.30.00
5. upgrade to SPL 2.10
6. downgrade SPL from 2.10 to 1.40
7. downgrade from WM5 Rom (It is some sort of HTC Standard WM5 Rom that my friend gave me, and my radio has gone back to 1.38.00.10 as the ROM comes with it.
8. upgrade to SPL 2.10
9. upgrade to Radio 1.40.30.00
Also, you may check out mrvanx's guide for downgrading to WM5 here.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26

bronx said:
...but just to let You know..
once You go black (2.5 ), You will never go back...
Click to expand...
Click to collapse
actually... i'm on black 2.5 and thinking of going back... too many apps are wiggin out on wm6

I actually just did it. I was running the latest version of HardSPL, flashed to the new ATT ROM, and then created a updater to flash the SPL to the ATT spl.
Wasn't hard, and only took a few minutes. So, as of right now, my phone is running the new ATT ROM, and if I need to warranty it, I'm all set.

in the wiki it mentions..
If your vendor has released you original rom as a shipped upgrade, you just need to flash it.
If your vendor has not released any ROM upgrade yet, you cannot fall back to original ROM easily. You'll have to reconstruct the ROM out of a dumped ROM.
Click to expand...
Click to collapse
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.

crabwalker said:
The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Click to expand...
Click to collapse
if you only want to read chinese, but not input, there is an alternative to it. look for a cab which is named 'sunglobe.ttf register patch'.

Maybe the easiest way
First thing I would want to do is to Flash the unit to what is known as a "Hard SPL". For some reason it makes all the other flash work go a lot more smoothly. You can get instructions and software for that at:
http://www.mrvanx.org/cms/index.php...ask=view&id=40&Itemid=26&limit=1&limitstart=2
Once that is done, and it should take about 5-10 minutes depending upon the speed of your computer and USB connection, you can load whatever OS rom you desire.
You can get a carrier agreeable rom from the Cingular/ATT site:
http://www.htcamerica.net/support/8525/software-downloads.html
Or, and this should work, just link directly to the rob by clicking:
http://www.htcamerica.net/support/d...R_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe
This should leave you at the latest and greatest of the WM5 packages from Cingular/ATT, and all should be well. And . . . if it hozes . . . which it should not, you should have no warrantee issues since you were trying to flash the upgrade that THEY were providing you. :-D
Laters,

d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
ROMs from Dopod HK or Singapore are very old ones. The SPL is 1.04. You may not be able to flash backward if you are with HardSPL v7. Also if your radio ROM is newer than 1.27, you may face problem when you flash the original (as it is packed with an old radio rom).
(Please correct me if I am wrong.)
To play safe, follow mrvanx' guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26

d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40

crabwalker said:
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40
Click to expand...
Click to collapse
So in other words: do exactly what my guide says to do?

Why
mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Why would anyone want to do that? A tested process that works time and time again?
And if you don't mind the compliment, all of your guides rock!

mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Yes, just forgot to mentioned, I ripped the Bootloader and Radio all based on your (mrvanx) guide. It is great, the info provided is easy to follow, very clear and precise. Thanks.

HELP NEEDED: Have IPL-1.01, SPL-1.01. Want to update to WM6 official.

I just bought a Cingular 8525 and would like to update it with the "official" Cingular dump. I posted a problem on another thread and was told that I had a debug device. My bootloader info are as follows:
HERM100
IPL-1.01
HERM100 MFG
SPL-1.01
The only way for me to upgrade is if I use HardSPLv7 but im also reading that you cannot update to official roms if you have HardSPL. What should I do?

ishtangli said:
....The only way for me to upgrade is if I use HardSPLv7 but im also reading that you cannot update to official roms if you have HardSPL....
Click to expand...
Click to collapse
nice, flash hardspl.
mfg chief

mrvanx said:
may i reiterate again, the RUU in the official version WILL NOT work if you have updated to HardSPLv7 (which is HIGHLY RECOMMENDED).
Therefor you need to use the repackaged version i uploaded to rapidshare and megaupload.
RapidShare
MegaUpload
Click to expand...
Click to collapse
There is no repackaged version of the official Cingular Rom and that's what I want to flash. I hope you understand the problem.

EDIT: Post removed by me.

How to flash SPL 2.03

Howd'y just got a new Jasjam Spl is 2.03 how do I go about flashing my rom as the RUU doesn't have my SPl in it ??? Basically I want to updat to CRC's latest

Do some more homework first dude, you dont wanna end up with a paperweight......ALWAYS make sure you have flashed HardSPL before you do ANYTHING.
Take a peek here about what to do: Flashing HardSPL. Then flash away with any ROM you please.

Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one

bongo333 said:
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
Click to expand...
Click to collapse
seriously....you DO NOT need/want to be using SPL 2.03....you are increasing the risk of bricking your device...flash hardspl 2.10 to your device then just flash CRCs rom using the utility included with it.
Follow the guide i posted earlier to make your device safe to flash then look in CRCs thread for the files you need to run the ROM.

Bongo333, listen to MrVanx.... You asked the question and he's giving you his expert opinion... Listen to his experience cos god knows his guides have helped me out a lot of times...We don't wanna be answering questions tomorrow about how to unbrick your hermes. Its easier if you listen to experience and have a good time upgading your hermes as we won't knowingly steer you wrong..
Cheers

Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks

paulslee said:
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
again there is a guide how to downgrade at mrvanx above

test7875 said:
again there is a guide how to downgrade at mrvanx above
Click to expand...
Click to collapse
I've gone through that, but that only gets you to SPL 1.06, which (I'm not sure really) is an older version which wouldn't be recognised by Telstra as genuine?

Thats fine thats a retail one.
You can go to 1.04
its here as stated on this mrvanx page
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27

Have yout got these page contents anywhere? These links what you write are inactive!

p3600i rom

http://rapidshare.com/files/121817898/Trinitin_-p3600i-Working_Mary-wwe-wm6.1.rar.html
this is a repack of the Mary 3.7 WWE lite FOR THE P3600i as found elsewhere in this forum.
YOU NEED TO have the 3.2 hardspl from olipro installed and have the phone in bootloader mode in order for this to work.

thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??

amanx said:
thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??
Click to expand...
Click to collapse
3.2 is what i have - it worked for me.

thks ajajaj will try and posted. being download now

Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni

now my CHT9110 got P3600I WM6.1 mary..and work fine. thks ajajaj.
btw..what wrong with other cook WM6.1 for P3600i, why when i try to flash it get through the process but the phone get stuck on boot screen.
appreciated for your advise.

mrmoni said:
Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni
Click to expand...
Click to collapse
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.

what does repacking the ROM involve? can it be done manually for other cooked ROMs?

ssamth2003 said:
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.
Click to expand...
Click to collapse
Did it ! Works like a charm
Thank You !!!

i hv test for an afternoon
i use 3g network with 3HK
i find that the 3g signal is very week when compare with the original wm6 htc rom
is there any method to solve the problem??
thx

Thanks Worked!!!!
going to try the
P3600I WM6.1_5.2.19588(Diamond) WWE ROM support CHS,CHT,JP,KR,TH,ENG,RU,GR V03.13.YK rom next

Can you do a full guide include all the files and all the proccess? for someone that never done rom flash... and i can put any rom?

Please, how i do the flash... step by step... I didnt get it

O2 XDA Diamond official ROM (German)

Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html

perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31

Thx!
Yeah, thanks man!

you are my hero (4 2day)!!!

Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!

Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider

http://www.megaupload.com/?d=D5HWC22H

I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...

Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...

thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert

thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.

sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot

thx for the guide

is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian

Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony

whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?

can anyone sign this for me to use?

anyone ????

First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far

Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?