Develop Bugs

Big problem with the spl, I need seriously help with this

Currently My diamond has the olinex 1.40 unsigned hard-spl. I've to ship it back and try to flash to a stock spl. After flashing to 1.34 the original spl it still says the olinex 1.40 version is on it. What is odd is that the when I start the bat file to go to the bootloader he doesn't response to it, but it will go to the bootloader when i start the flash. I can't start manuely with spl bootloader. Because my touchscreen layer doesn't work at all i'm stuck in the screen calibrate menu. So why doesn't it says 1.34 after flashing it to 100 %.
The phone will be picked up this week but can't send it back like this.
I've read different topics complete but nobody seems to have the same problem.

Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?

Codeaction said:
Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?
Click to expand...
Click to collapse
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.

Did try it with 1.34 but will now try with 1.93.

ksekhar said:
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.
Click to expand...
Click to collapse
Thanks for the reply
it should work indeed but still doesn't. Before this I never had any problems with it, but again after flashing it keep saying 1.40Olinex even with the jumpspl.
Now something else

helo
to change the spl ..
to hard or stock spl
you must flash this with diamond conected to pc....
you can´t flash you device fron 3 color bars
try to conect your device to pc (power up you device, and when it says to calibrate your screen conect your device to pc)
if you want more advice pm me

Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe

Codeaction said:
Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe
Click to expand...
Click to collapse
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....

ksekhar said:
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....
Click to expand...
Click to collapse
That's true, but the thing with it, it doesn't work to flash the spl. When I flash like that is will not chance the spl.

Is there a way to flash the spl without using the sspl-manuel.exe ?

Come on people, it will be picked up tomorow.
Is there a way to update the spl if the automatic mode doesn't work and the sspl-manuel can't be opent because i'm stuck at the press screen message. So is it posible to open the sspl without the obove options.

I have the same problem. Solution is next. Put file named welcome.not in the root directory of Diamond. This file must be clear - 0 bytes. Then softreset it. After SR you will not see calibration message. And will be able to spl your device. Good luck!

HELP!! I think i just bricked my new diamond...

i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?

galinsky said:
i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?
Click to expand...
Click to collapse
Try to do a hard reset?

Keep us posted as to what stage your at. Just a reminder if you haven't already. Internally Flashing Roms/Radios is the safest way to go.

galinsky said:
i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?
Click to expand...
Click to collapse
Volume down + Soft reset will enter boot mode and flash it again via usb

Yeah there is a way to fix it, but you should read a few threads before flashing! I hate topics like "HEEEEEEELP ME PLEEEEASE MY PHONE IS BRICK"
any way: enter phone in bootloader mode and flash with RUU then
I guess you don't know about entering bootloader mode so: press volume down and reset simultaneously
Next time read the forum!
Edit: baadnewz was quicker

Don't worry either. The only time you bricked your device is when you cannot go into bootloader mode. If you can't see the tri-colour screen, then your device is "bricked". Even in this state you can unbrick via Jtag or send for service and hopefully get a replacement.

Sorry for the newbish title ... I justmoved from a vogue to this and panic set in quickly! i got it into boot mode then reflashed it. works fine now ...

galinsky said:
Sorry for the newbish title ... I justmoved from a vogue to this and panic set in quickly! i got it into boot mode then reflashed it. works fine now ...
Click to expand...
Click to collapse
Issue resolved, thread closed.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

My htc diamond stuck after flashed

to whom it may concern,
I was flashing my ROM, after all thing done my device restart.but my device stuck on "HTC diamond" screen.
my hard SPL is HardSPL-1.24
the Rom I was trying to intall:MightyROM5
What can I do?Should I send to service?
Thanks in advance.

same problem here, stucked in tri-color.. hard reset didnt help...
need to flash original radio or rom ?

kayawu said:
same problem here, stucked in tri-color.. hard reset didnt help...
need to flash original radio or rom ?
Click to expand...
Click to collapse
I dont even see three color.only stuck in touch HTC screen.I dont know how to do that.

Step 1:
Put device into bootloader (hit soft reset button with stylus and hold vol. down button until you see rainbow screen)
Step 2:
Plug into pc
Step 3:
Flash another rom via RUU

[Q] Problem with my TP2 please help!!!!!

Oke I flashed my TP2 , and the flashing had one problems that was the first time I run the flashing rom(energie) it stop on the tri-color screen, and the flashing stopt there so I ran the same flashing rom again wile the TP2 showed the tri-color and it continued the flashing process so I thought every thing is a oké.
Then the phone did it first boot on the new rom and it stopt at the rom loading screen so right a way I knew somthing is not a oké. I tried flashing with sd, hard reset, mutty, 1 minute battery out the phone. I will give these option another go if you tell me how to do it with this phone.:
So kan somebody help me with this problem.
TP2 Info :
I bought the phone in The Nederlands
I don't know the rest of the specs
SORRY

St3v3-) said:
Oke I flashed my TP2 , and the flashing had one problems that was the first time I run the flashing rom(energie) it stop on the tri-color screen, and the flashing stopt there so I ran the same flashing rom again wile the TP2 showed the tri-color and it continued the flashing process so I thought every thing is a oké.
Then the phone did it first boot on the new rom and it stopt at the rom loading screen so right a way I knew somthing is not a oké. I tried flashing with sd, hard reset, mutty, 1 minute battery out the phone. I will give these option another go if you tell me how to do it with this phone.:
So kan somebody help me with this problem.
TP2 Info :
I bought the phone in The Nederlands
I don't know the rest of the specs
SORRY
Click to expand...
Click to collapse
Go into bootloader, plugin your usb, run task 29. Then when you are finisht, go back into bootloader, plug in your usb. Then flash the rom again true your pc.
btw did you install hardspl? you didn't mention it.

Lennyz1988 said:
Go into bootloader, plugin your usb, run task 29. Then when you are finisht, go back into bootloader, plug in your usb. Then flash the rom again true your pc.
btw did you install hardspl? you didn't mention it.
Click to expand...
Click to collapse
How do i get in bootloader, is that the screen that comes after tri-color screen.
btw and yes I did use install hardspl.

St3v3-) said:
How do i get in bootloader, is that the screen that comes after tri-color screen.
btw and yes I did use install hardspl.
Click to expand...
Click to collapse
The Tri Color screen is the bootloader. When connected to the computer it should say "USB" at the bottom. Otherwise it says "Serial".
EDIT: What version is your SPL? The unlocked version is 85.

stevedebi said:
The Tri Color screen is the bootloader. When connected to the computer it should say "USB" at the bottom. Otherwise it says "Serial".
EDIT: What version is your SPL? The unlocked version is 85.
Click to expand...
Click to collapse
I used the Rhodium-HardSPL_V2_00R3.exe. I am using Radio 2.08.50.05 + task29.zip. I am using the task 29 after is pushed the power, Call, Hang Up, but i keep getting the 260 error. What I am doing wrong.

St3v3-) said:
I used the Rhodium-HardSPL_V2_00R3.exe. I am using Radio 2.08.50.05 + task29.zip. I am using the task 29 after is pushed the power, Call, Hang Up, but i keep getting the 260 error. What I am doing wrong.
Click to expand...
Click to collapse
When you go into bootloader screen, what version of SPL is displayed? It should end in 85.

stevedebi said:
When you go into bootloader screen, what version of SPL is displayed? It should end in 85.
Click to expand...
Click to collapse
I cant see the tri-color screen long enough too read what it shows.
RHOD 100 32M SS-BC
SPL - 0.85.011 MAX
MicroP(LED) 0X0A
MicroP(KEY) 0X04

Read this page for your questions.
http://forum.xda-developers.com/showthread.php?t=550540
Then go into the bootloader. Plugin your usb and flash using your pc. Just run the customruu.exe.
Or you can try flashing from your sd card. your choise

Thanks for helping guys, I have fix the phone. I did not now that I could enter bootloader with VolDown + power button, thanks to that I could fix the phone by flashing the phone with a rom.