Develop Bugs

ROM Upgrade Failed-- HELP

My diamond after rom upgrade remain to black screen with "touch diamond" wih info about Radio protocot ecc...
What can i do ?
I've hard spl unsigned

wishmaster82 said:
My diamond after rom upgrade remain to black screen with "touch diamond" wih info about Radio protocot ecc...
What can i do ?
I've hard spl unsigned
Click to expand...
Click to collapse
Manually enter bootloader!

even if i format the problem do not solve

wishmaster82 said:
even if i format the problem do not solve
Click to expand...
Click to collapse
I said to manually enter bootloader, not hard reset!

ok but when i enter bootloader the phone ask me to format. I'm going wrong ?

What ROM were you trying to flash?

mine first attempt with diamond...

wishmaster82 said:
My diamond after rom upgrade remain to black screen with "touch diamond" wih info about Radio protocot ecc...
What can i do ?
I've hard spl unsigned
Click to expand...
Click to collapse
Weird, did you do everything right? Check again

You entered the wrong mode
To get where you can re-flash.
1. Hold Vol Down button and Soft Reset. This will get you to the tri-colored screen. Then you can connect USB cable to make connection.

wishmaster82 said:
ok but when i enter bootloader the phone ask me to format. I'm going wrong ?
Click to expand...
Click to collapse
This so called entering bootloader which asks you to format is really a Hard Reset, really!
Entering bootloader only displays information about SPL amongst others!
So if you are struggling to Hard Reset, you've just got it!
Manually entering the Bootloader is done by pressing Volume Down button and performing a soft reset at the same time.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

need hellp pls

I just flash my Artemis with wm6.5 lite made by thormdac, and it does not start, is stuck when WM is loading, I can not connect it to computer, what can I do? Can I make it longer work? I will post some pic with it.
Thank you.

1. have you tried a hard reset? (see wiki to know how to do this)
2. First boot after flash is normaly taking much longer dan a normal boot, ingore all noises (beep) till the screencalibration is visible and input is required,
3. How did you flash, did you remove correctly your microsd card before the flashing/update?
4. Did you use USPL to unlock the current rom first?

If dont work your phone after the steps what Twiggerdingo wrote, you can enter to boot loader with voice + power button (use them at the same time when your phone is off) and connect to PC and flash the latest official rom. After that, flash the uspl and you can flash thormdac's rom.

Twiggerdingo said:
1. have you tried a hard reset? (see wiki to know how to do this)
2. First boot after flash is normaly taking much longer dan a normal boot, ingore all noises (beep) till the screencalibration is visible and input is required,
3. How did you flash, did you remove correctly your microsd card before the flashing/update?
4. Did you use USPL to unlock the current rom first?
Click to expand...
Click to collapse
thanks for the advice, I tried everything you said and not working, thank you

Shady313 said:
If dont work your phone after the steps what Twiggerdingo wrote, you can enter to boot loader with voice + power button (use them at the same time when your phone is off) and connect to PC and flash the latest official rom. After that, flash the uspl and you can flash thormdac's rom.
Click to expand...
Click to collapse
Thank you, that is working.

Ha advice from the master himself did the trick. I am glad it works again!

HTC p3300 Artemis100
Hi Members...
Having HTC p3300 Artemis100 with:
IPL:3.07.0001
SPL:3.07.0000
GSM:02.69.90
OS:3.7.0.0
When Starting its Htc Spash Screen. than error:
"Device Startup Failed Due To Sudden lose of Power
press "YES" To continue
after clicking phone goes off
well i tried to reset phone, hard reset. also changed the bettery but still same problem..
is there any way recover or HARD SPL In Bootloader Mode?
Bcoz I cant Use USPL_Atremis Bcoz Phone dont start...
thanks in advance

Help!

My htc touch diamond won't start and stuck in the Touch Diamond Screen and i've tried to flash rom from boot loader but it all stuck with 0% and I've tried to follow the instruction at the sticky but nothing happen so can anybody help i'm facing serious problem because it's my brother phone! Thanks In Advance

try mtty ,hope it will help

khvan_chan_bong said:
My htc touch diamond won't start and stuck in the Touch Diamond Screen and i've tried to flash rom from boot loader but it all stuck with 0% and I've tried to follow the instruction at the sticky but nothing happen so can anybody help i'm facing serious problem because it's my brother phone! Thanks In Advance
Click to expand...
Click to collapse
If you have HardSPL, try these steps:
1. Download any rom with CustomRUU.exe(Search for Benko Roms that comes wid this)
2.restart your phone - simultaneously press volume down button.it will open bootloader screen
3.Connect wid pc using data cable.
4.launch CustomRuu.exe
hope it helps.

i've tried it man!!!it works!!!!

I've not yet hard spl it and i can't hard spl it with boot loader! Everything stuck with 0%!

khvan_chan_bong said:
I've not yet hard spl it and i can't hard spl it with boot loader! Everything stuck with 0%!
Click to expand...
Click to collapse
with bootloader and not connected to PC - you see Serial
Connect to PC, it should change to USB
now can you launch the CustomRUU for HSPL and then flash HSPL ?

Dead Diamond

I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls

try to enter into bootloader mode and flash a new rom

DilosPL said:
I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls
Click to expand...
Click to collapse
Might be a problem with your radio. Can you provide more details about your unit, ie:
What version is your SPL/HardSPL?
What version is your radio?
What ROM are you using (OS, etc)?

Did you try to remove the battery for a lot of time?

I have two solutions
DilosPL said:
I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls
Click to expand...
Click to collapse
I also had this problem, and i have two solutions, maybe can help you :
1. On your phone: simultaneously press the volume down and reset to get into boot mode.
Once you have managed this, follow the instructions on the screen of your computers with installation of rom.
2. Possibly you do not succeed the first step, obtain a version of HardSPL Diamond, .nbh or ROMUpdateUtility.exe, and running, with the phone connected to PC and in mod boot loader.
IMPORTANT I recommend :
" Try to get HardSPL-1.24 " , ( versions of HardSPL which are in atachament I have not ever installed on the my HTC Touch Diamond, because already have the HardSPL-1.24 on my phone )
Should work, good luck and more attention next time.

THX!! i reinstalled my hardspl to 1.30 and then i was able to reinstall my rom ^^ and it works

nope :/ still restoring to factory after freeze and reset :/

DilosPL said:
nope :/ still restoring to factory after freeze and reset :/
Click to expand...
Click to collapse
use MTTY then flash the Hard SPL 1.40 then flash the rom you want

Yep random soft/hard resetting is a sympton of MTTY necessity!