Hy. I'm having problems with n560 ROM update. During setup my device restarted (it should) but it doesn't wake up in the OS but it stucks on screen with two climbers on a mountain. I tried all reset tipes but they don't help. Is my device totaly bricked? Can you help me please?
Try here : http://www.clieuk.co.uk/forum/showthread.php?t=23432
Related
After installing randomize_wm6_1_storm_v2_10_rom_wwe, it got hanged. It is not booting. What to do? Is there any software to solve this problem?
Please help.
Dharmesh Shah
1st do a hard reset. hold down both softkeys and hit reset button. This will set it back to "factory" (this means it should boot up like the 1st time it was started BUT it will have the last os you flashed - randomize_wm6_1_storm_v2_10_rom_wwe). see if that works, Otherwise reflash by going into boot loader and connecting to usb, run the RUUWrapper.exe of the os you want and let it upgrade. cheers.
Hello, i have a new P3300. The first time i opened it it started installing some basic stuff/programs and then worked quite good. Then i turned it off and when i turned it on again it shows the first splash screen with the htc logo, shows IPL and SPL versions on the left top side (like it should do) and then it instantly turns off. I have tried installing the official WM6 ROM again and again but after the installation finishes the problem remains. Also, when in confirmation dialog for the ROM to be installed or not when it shows the old and the new version, the old is completely blanc.
P.S.: Something else, when i connect it to charger (or USB cable) the orange light keeps going on and off about every 30 seconds.
Any help would be highly appreciated guys.
Send it back to your vendor for warranty...
Cheers
After many tries i managed to install some older official ROM but again after the initial screen calibration and the other stuff some customizations started installing and when PDA rebooted the problem appeared again. But tomorrow I'm getting it to service (and getting my Qtek 8310 back which by the way got a repair although unlocked ).
Dear all,
I need help in repairing my Asus p525. I was trying to flash it to WM 6.1, but suddenly update failed. After that i started getting asus Blue Screen, and nothing more. I cannot hard reset, neither turn on the PDA. When I take out the battery, I can, by pressing CAM REC JOY and SOFT RESET button to get to USB loader.
I used USB loader and reinstalled my ROM and Boot Loader to Official Release of Asus. But this didnt help and I still get only Blue Screen, and after that nothing - unless I take out my battery for a while and return it.
Can anyone help me with this problem ?!
Greetings
New thing
Last night I took my battery out of the phone. Today I dont even have ASUS BLue Screen, but still i can, while holding the buttons, on reset (inserting the battery) to go into FORCE MODE.
Anyone know what to do ??
Today I reflashed with new roms, but it just dont work.
Greetings
I realised now, that when I charge the battery FULL, the phone starts working ?! First i have problem to calibrate the screen, and later on the OS start to work, and everything seems fine ?! But it resets, block..... hardware thing ?
Hi everyone, can anyone help me bout my problem in my unit?
Firstly, my rom was upgraded to mobiz18 clean rom, but unfortunately i was not able to activate my internet access, so i decided to change rom to mobiz13. I upgrade it by copying the file (nbo/unlocklangid)to minisd and have it upgrade, it was however completely succesfull, but when i press the power button and reset button to have the upgrade activated, it stuck up and appears in screen the "p525 club" and the lights never off, meaning, the unit was hang. I tried to hard reset many times but it has no effect and hard reset was not succesfull. Please help......................
try to flash with an original rom, then flash with mobiz 20
do you have mobiz 20... plz link download...tanks
Hi guys,
my diamond has gone berzerk!
it gave up on me all of a sudden....froze so i tried to restart and didnt work. i did a hard reset and eventually finished. the problem is that the phone wont detect any network, wifi and bluetooth are working but the 'phone' isnt - in comm manager enabling phone appears to do something showing the busy icon but then reverts back to 'off'.
im using hard spl 1.40
radio .25.08
and every rom does this.
the red reset button is also not doing anything more, i.e pressing it does nothing...
ideas???
oh and it occasionally resets too....
did a hard reset and the phone keeps rebooting....gets to the windows logon and then reboots....
anyone??
flash a stock rom fron bootloader mode it worked for me
simba2585 said:
did a hard reset and the phone keeps rebooting....gets to the windows logon and then reboots....
anyone??
Click to expand...
Click to collapse
how much?
after hard reset two time could be normal.
it restarts an infinite number of times - as if it gets stuck in some loop.
its very random so there can be periods of time where its fine and i think its cured itself then all of a sudden it will restart and be fine for a while then sometimes it can just get stuck in a restart loop.
have you find a solution?
i know from my experimentals that loopings are normal by ****ti-mitti-roms.
the rom could be fine, but one deleting file here or there let starts the looping.
try orig. rom from your device. if looping again ... dont know :-(
Maybe this thread can help you out, it's worth trying:
http://forum.xda-developers.com/showthread.php?p=3433851