Imate- Jasjam - Upgrading, Modifying and Unlocking

After installing randomize_wm6_1_storm_v2_10_rom_wwe, it got hanged. It is not booting. What to do? Is there any software to solve this problem?
Please help.
Dharmesh Shah

1st do a hard reset. hold down both softkeys and hit reset button. This will set it back to "factory" (this means it should boot up like the 1st time it was started BUT it will have the last os you flashed - randomize_wm6_1_storm_v2_10_rom_wwe). see if that works, Otherwise reflash by going into boot loader and connecting to usb, run the RUUWrapper.exe of the os you want and let it upgrade. cheers.

Related

Please help, boot loader mode not appearing!

Hi all,
I am running the meschle Artemis Touch ROM 4.1 and I am trying to change to an ealier version of meschle ROM (When I upgraded to that ROM I ran from step1 and my device has always been Super CID). I tried both directly from step2 or step1 but neither worked. When it gets to the boot loader mode (where there should be tri colors) it is displaying white blank screen.
This happens even if I hold down the voice button and press reset via stylus which suppose to go into boot loader mode. So now I cannot change to other ROM without the tri colors boot loader!! I am kind of stuck now. Is there anything I can do to resolve this problem, by reinstalling thing or something like that?
Any suggestion will be really appreciated!
Problem resolved!!!!
I have just managed to resolve the boot loader problem!!!!!!!!!!!!!!!!
I turned it off, took the battery out, took the SDHC card out and put the battery back, power it back on and the boot loader works!!!!!!!!!! So something in that process has resolved the problem.
Thanks anyway.
Thank you very much. I had the same problem. Now im good
many thanks for your advice
oh man , i have spent 3 full days searching a solution for the white screen during upgrading & finally i find it because of SDHC card , now i can upgrade whatever i want
Thanksssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Malik Chaabane

ASUS P525

Hi everyone, can anyone help me bout my problem in my unit?
Firstly, my rom was upgraded to mobiz18 clean rom, but unfortunately i was not able to activate my internet access, so i decided to change rom to mobiz13. I upgrade it by copying the file (nbo/unlocklangid)to minisd and have it upgrade, it was however completely succesfull, but when i press the power button and reset button to have the upgrade activated, it stuck up and appears in screen the "p525 club" and the lights never off, meaning, the unit was hang. I tried to hard reset many times but it has no effect and hard reset was not succesfull. Please help......................
try to flash with an original rom, then flash with mobiz 20
do you have mobiz 20... plz link download...tanks

Need help flashing a phone caught in boot cylce

Hello,
I have a AT&T Tilt 2 that is caught in the boot cycle. Splash screen comes on, it reboots. I'm quite confident that flashing a new ROM will fix it it but the phone has not had hard SPL installed so I can only flash the original AT&T ROM, which as far as I can tell is not available?
I've tried to install SPL but it won't take in the state that phone is in. Is there a way to flash SPL from the memory card? Any other suggestion on how to flash it? Is the original AT&T ROM available?
Any other suggestions on how to proceed?
Your input is greatly appreciated.
try this
copy recovery img from wiki to root of micro sd card. img should be named xxx.img, insert microsd card into phone
with phone off hold down the vol down key and the red/phone call end button then power on, with any luck you should see the tricolour boot screen and the img should be detected and flashed automatically. ensure at least 50% battery
try taking your sd card out of your phone and then reboot. if that takes it out of the boot cycle, then you have installed a program to your sd card that is putting it into the endless boot cycle. after your phone boots up, uninstall whatever program that you installed to your sd card. hopefully that helps.
if all else fails, try a hard reset. just hold down the send button, end call button and power button simultaneously. it will ask you to press the volume up button to proceed. that will wipe your phone to factory settings and then you can hardspl your phone and flash away!
Milo, thanks for your reply... I can't seem to locate that recovery img on Wiki, hate to ask but can you post the link?
spacemonkey, I've tried those steps and it's still caught in the boot cycle.
You might want to explain how your phone got caught in the boot cycle to begin with. If it happened randomly, and you weren't trying to mod the phone, then just take it in for service. But somehow I doubt that's what happened. What were you doing? How come you don't have hard spl on there? What did you try to flash onto your phone, and how did you try to do it? These are all important questions that you should answer first before blindly flashing things to your phone.
The unit froze up. Tried to reboot the phone, it boot looped. Tried a hard reset, it continued to reboot.
It initially happened when a text message was coming in.
May just have to send it in. It doesn't want to take a flash of any kind it seems.
omegacell said:
The unit froze up. Tried to reboot the phone, it boot looped. Tried a hard reset, it continued to reboot.
It initially happened when a text message was coming in.
May just have to send it in. It doesn't want to take a flash of any kind it seems.
Click to expand...
Click to collapse
If it just crapped out on its own, then the last thing you want to do is try to fix it on your own (other than doing the obvious like hard resetting and pulling the battery). Just return it and get another.
Well it's not that easy since I'm in Canada and it has to go to AT&T so I thought if I could get it going it would save me a lot of hassle but it seems I have no choice!

Diamond stuck at configuring screen after Rom upgrade

Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you
decent_devil said:
Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you
Click to expand...
Click to collapse
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe
HELICOPTER88 said:
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe
Click to expand...
Click to collapse
Thanks, Managed to extract one Rom and restore my phone via customRUU.exe.

[Q] Cavalier got stuck

hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
umer92 said:
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
Click to expand...
Click to collapse
use the method MTTY to fix it, after that reflas with official rom
hey, i have tried every thing for couple of weeks, but its not working for me, as when my cell phone restarts it stucks on the welcome screen, is there any way to delelete the operating system and install it again?
Sequence for recovery is (don't execute the next step if one gets your device back to life):
Soft Reset (Reboot) - this did not help obviously as you wrote.
Hard-Reset - mind that first boot will take much longer than usual, some minutes (up to 10 - depending on the device) will pass until the device is ready again. This is because all operator and init-specific things must be executed on the device with first boot. Be patient and do not interrupt - it must finish by itself. -You may just be stuck here!
Re-Flash the right shipped ROM - mind that the device can only receive the CID matching original ROM, not just any ROM (yet). You must do that while the device is waiting in bootloader mode, otherwise the RUU may not be able to access the device.
Gold-Card Flash a close-matching ROM (so one with same languages and the right device).
Please describe in detail what you did already and what were the results of your actions.
hey thankz, but i tried everything, all the steps you written above i them them all, nothing happened,, please help me,, my fon is stuck for couple of months.. it just shows the welcome screen, nothing else.. is there is a way that i can flash the operating system and reinstall it??
waiting..
bring the device to go into bootloader mode by Hold the camera button on the right side, press the power button. The phone will enter the " bootloader " mode and you 'll see the tricolor boot screen. after that reflash the device with shipped rom can you get at ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/

Categories

Resources