Hi all,
I am running the meschle Artemis Touch ROM 4.1 and I am trying to change to an ealier version of meschle ROM (When I upgraded to that ROM I ran from step1 and my device has always been Super CID). I tried both directly from step2 or step1 but neither worked. When it gets to the boot loader mode (where there should be tri colors) it is displaying white blank screen.
This happens even if I hold down the voice button and press reset via stylus which suppose to go into boot loader mode. So now I cannot change to other ROM without the tri colors boot loader!! I am kind of stuck now. Is there anything I can do to resolve this problem, by reinstalling thing or something like that?
Any suggestion will be really appreciated!
Problem resolved!!!!
I have just managed to resolve the boot loader problem!!!!!!!!!!!!!!!!
I turned it off, took the battery out, took the SDHC card out and put the battery back, power it back on and the boot loader works!!!!!!!!!! So something in that process has resolved the problem.
Thanks anyway.
Thank you very much. I had the same problem. Now im good
many thanks for your advice
oh man , i have spent 3 full days searching a solution for the white screen during upgrading & finally i find it because of SDHC card , now i can upgrade whatever i want
Thanksssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Malik Chaabane
Related
Hi @l..
sorry if i have a double post
but, it think, it´s better in this level ;-)
I have B&B4.0 on my P3300. I have the problem, that it stuck on the second bootscreen. First time it happed, i resetet about 3 times, and then it works again.
Now my battery was out of power, so my Artems goes off.
Now i started it an it hang.. ok.. i thought thats normal.. but i did since yesterday about 40 soft resets!! And it ever stuck on Bootscreen.
But i don´t want to do a hard reset, because i need some files of the filesystem.
SO MY QUESTION:
is there any way to dump the rom from bootloader mode, or is there any way to get active sync running in bootloader mode, so i can go to the filesystem???
i need help
PLEASE!
thanxx 2 @ll
Hello,
I have Miphone M88 (WM6.1 Eng)
i flash it whit Rom WM6.0, Now my phone work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
please help me i have a big problem
Thx
I thought that I remember reading somewhere that when you flash your phone it does take quite a while before it's complete, and that the screen does stay white for quite a long time.
Mike
No, I wait until he terminate flashing, and when he reboot it came with screen white,
have you one solution now!!
Thx
I'm sorry I don't, I'm yet to flash my m88.
have you tried taking the battery out and leaving it for 10 minutes, and then entering the boot loader screen again and trying to re-flash?
Mike
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
can some help with this?
i have a clone m99 same thing as an m88 i guess the original rom img worked whe i flashed it when i downloaded the new 6.5 and tried flashing that all i did was stay at "downloading image please wait" and thats it. went to lift the phone up and the battery fell out not nothing works at all even with a fuly charged battery i cant even turn this stupid thing on. so im hoping anyone has any insight on what i could try and to to fix this.
p.s. i have left the beatery of for 30 mins and still nothing .....
help i got white screen too ;[ m88 after rom update only white screen and i cant do nothink ;[
Hey!
Im new to this forum but there seems to be a lot of experts here so i thought i'd try and see if anyone could help me!
Yesterday i put my desire to charge and after one hour i came back and it was showing the boot screen! The white background with the 3 green letters HTC! so i took out the battery and put it in again and restarted the phone but it only gets to that screen vibrates like 10 times and then hangs there! tried waiting for it for 30 min but nothing...
So then i tried to hard reset it and cleared the storage! but afterwards still the same!
Also when in "recovery mode" i sometimes see some green text flashing by for just a sec saying something like "warning...no image...."
Everything is in its original state, i havent rooted or reflashed it or anything... but i am willing to do so if it can solve my problems since warranty matters in my case will take ages!
The phones language is Swedish btw!
Can anyone help me?? its first now that u realize how much the phone means to you Miss my desire!
it sounds like the firmware is somehow corrupted. If you can boot the phone by pressing power and volume down, this will take you to the bootloader. From here you should be able to root the handset by following any number of threads here or on modaco!
Then I'd go Here and install this recovery. From then on you can choose a custom or stock rom to install.
You need to know though that rooting will void your warranty.
Have you also tried booting the phone normally with the SD card removed?
Edit: After 5 month passes I have hope that somebody came across this
problem as well in the meantime. It's quite annyoing not to see the screen
during boot and recovery since I'm flashing roms quite often.
Thank you in advance for any feedback.
Cheers
NDesire
Edit:
It seems I'm the only one having that kind of problem. :-(
Hi Everybody,
somthing very strange happend to me. I hope you can help me. After I broke
my AMOLED Screen, I replaced it with a new one. (Yes I ensured, that it is
an AMOLED and NOT a SLCD). After reassembling, everything seemed to work
fine. The Desire boots first with green HTC splash screen and then with my
monster boot animation from InsertCOIN. But then, after second reboot the screen remains black.
I could feel the vibration, so the phone seemed to start but no splash screen and no boot animation.
When the boot is finished, I can activate the screen by double pressing the power button.
After that, phone works ok without any flaws. However, when I reboot, same procedure again.
The screen remains black until the boot is finished. OK, phone is working but it is annoying that I can't
go into HBOOT or Recovery mode. Actually I found a work around by using Androidscreencast to go into
recovery and flash roms, but I'd like to do it from the phone direct without casting the screen to my PC.
After some investigation I found an issue with probably wrong display driver, but that's purely related to SLCD Desire.
Anyway I tried to flash the latest RUU and rerooted in order to see if it makes any difference. But no change.
I even tried to replug the display connector to the main PCB in the phone. Nothing helps.
Now I hope the community has an idea.
By the way I had Bootloader 0.75 before reflashing RUU. Now it is 0.93. I'm currently running InsertCOIN 2.0 with A2SD.
Thank you in advance for any useful hint beyond what I tried so far.
Cheers
NDesire
Hi all,
after 5 month passes I have hope that somebody came across this
problem as well in the meantime. It's quite annyoing not to see the screen
during boot and recovery since I'm flashing roms quite often.
Thank you in advance for any feedback.
Cheers
NDesire
Edit:
It seems I'm the only one having that kind of problem. :-(
Hi Everybody,
somthing very strange happend to me. I hope you can help me. After I broke
my AMOLED Screen, I replaced it with a new one. (Yes I ensured, that it is
an AMOLED and NOT a SLCD). After reassembling, everything seemed to work
fine. The Desire boots first with green HTC splash screen and then with my
monster boot animation from InsertCOIN. But then, after second reboot the screen remains black.
I could feel the vibration, so the phone seemed to start but no splash screen and no boot animation.
When the boot is finished, I can activate the screen by double pressing the power button.
After that, phone works ok without any flaws. However, when I reboot, same procedure again.
The screen remains black until the boot is finished. OK, phone is working but it is annoying that I can't
go into HBOOT or Recovery mode. Actually I found a work around by using Androidscreencast to go into
recovery and flash roms, but I'd like to do it from the phone direct without casting the screen to my PC.
After some investigation I found an issue with probably wrong display driver, but that's purely related to SLCD Desire.
Anyway I tried to flash the latest RUU and rerooted in order to see if it makes any difference. But no change.
I even tried to replug the display connector to the main PCB in the phone. Nothing helps.
Now I hope the community has an idea.
By the way I had Bootloader 0.75 before reflashing RUU. Now it is 0.93. I'm currently running InsertCOIN 2.0 with A2SD.
Thank you in advance for any useful hint beyond what I tried so far.
Cheers
NDesire
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
umer92 said:
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
Click to expand...
Click to collapse
use the method MTTY to fix it, after that reflas with official rom
hey, i have tried every thing for couple of weeks, but its not working for me, as when my cell phone restarts it stucks on the welcome screen, is there any way to delelete the operating system and install it again?
Sequence for recovery is (don't execute the next step if one gets your device back to life):
Soft Reset (Reboot) - this did not help obviously as you wrote.
Hard-Reset - mind that first boot will take much longer than usual, some minutes (up to 10 - depending on the device) will pass until the device is ready again. This is because all operator and init-specific things must be executed on the device with first boot. Be patient and do not interrupt - it must finish by itself. -You may just be stuck here!
Re-Flash the right shipped ROM - mind that the device can only receive the CID matching original ROM, not just any ROM (yet). You must do that while the device is waiting in bootloader mode, otherwise the RUU may not be able to access the device.
Gold-Card Flash a close-matching ROM (so one with same languages and the right device).
Please describe in detail what you did already and what were the results of your actions.
hey thankz, but i tried everything, all the steps you written above i them them all, nothing happened,, please help me,, my fon is stuck for couple of months.. it just shows the welcome screen, nothing else.. is there is a way that i can flash the operating system and reinstall it??
waiting..
bring the device to go into bootloader mode by Hold the camera button on the right side, press the power button. The phone will enter the " bootloader " mode and you 'll see the tricolor boot screen. after that reflash the device with shipped rom can you get at ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/