Develop Bugs

Please help, boot loader mode not appearing!

Hi all,
I am running the meschle Artemis Touch ROM 4.1 and I am trying to change to an ealier version of meschle ROM (When I upgraded to that ROM I ran from step1 and my device has always been Super CID). I tried both directly from step2 or step1 but neither worked. When it gets to the boot loader mode (where there should be tri colors) it is displaying white blank screen.
This happens even if I hold down the voice button and press reset via stylus which suppose to go into boot loader mode. So now I cannot change to other ROM without the tri colors boot loader!! I am kind of stuck now. Is there anything I can do to resolve this problem, by reinstalling thing or something like that?
Any suggestion will be really appreciated!

Problem resolved!!!!
I have just managed to resolve the boot loader problem!!!!!!!!!!!!!!!!
I turned it off, took the battery out, took the SDHC card out and put the battery back, power it back on and the boot loader works!!!!!!!!!! So something in that process has resolved the problem.
Thanks anyway.

Thank you very much. I had the same problem. Now im good

many thanks for your advice
oh man , i have spent 3 full days searching a solution for the white screen during upgrading & finally i find it because of SDHC card , now i can upgrade whatever i want
Thanksssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Malik Chaabane

help

hi
can anyone help me, i flashed my spv m700 with a new rom, the programme crashed during upload and instead off the system rebooting to my original rom. it now wont boot up, it gives me the option to soft reset and hard reset, but the screen wont come on, the green light on the top just stays on constant and the screen does not come back up, please help

Just use the "Search" take a look at this thread http://forum.xda-developers.com/showthread.php?t=308691 i think it will be helpful, once i've had the same problem and used the splxploit mentioned there and everything was just fine! Hope it helps , Good luck and post a reply if it does or does not!

herm stuck at splash

hi i have the darkvisions 5.0 rom and i have changed my splash screens and that all worked perfectly fine but about a week on and when i installed something from my pc my phone froze so then a did a soft reset, then the usaul red writing come up then it just freezes and i have left it overnight to load but nothing happens does anyone have a solution. and sorry if this has already been posted if so can u direct me becuase i could not find anything, and sorry if it in the wrong place

Take battery out for a few minutes then restart. A soft reset isn't the same as a cold start. You nee to clear the ram.
Then if it still gets stuck, reflash, but flash a stock rom first....
Cheers...

Rebooted Touch Diamond and the circle LED was lit up solid. Any ideas?

Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.

Desire hangs at bootup screen and just vibrates a few times..:( (broken??)

Hey!
Im new to this forum but there seems to be a lot of experts here so i thought i'd try and see if anyone could help me!
Yesterday i put my desire to charge and after one hour i came back and it was showing the boot screen! The white background with the 3 green letters HTC! so i took out the battery and put it in again and restarted the phone but it only gets to that screen vibrates like 10 times and then hangs there! tried waiting for it for 30 min but nothing...
So then i tried to hard reset it and cleared the storage! but afterwards still the same!
Also when in "recovery mode" i sometimes see some green text flashing by for just a sec saying something like "warning...no image...."
Everything is in its original state, i havent rooted or reflashed it or anything... but i am willing to do so if it can solve my problems since warranty matters in my case will take ages!
The phones language is Swedish btw!
Can anyone help me?? its first now that u realize how much the phone means to you Miss my desire!

it sounds like the firmware is somehow corrupted. If you can boot the phone by pressing power and volume down, this will take you to the bootloader. From here you should be able to root the handset by following any number of threads here or on modaco!
Then I'd go Here and install this recovery. From then on you can choose a custom or stock rom to install.
You need to know though that rooting will void your warranty.
Have you also tried booting the phone normally with the SD card removed?