hi i have the darkvisions 5.0 rom and i have changed my splash screens and that all worked perfectly fine but about a week on and when i installed something from my pc my phone froze so then a did a soft reset, then the usaul red writing come up then it just freezes and i have left it overnight to load but nothing happens does anyone have a solution. and sorry if this has already been posted if so can u direct me becuase i could not find anything, and sorry if it in the wrong place
Take battery out for a few minutes then restart. A soft reset isn't the same as a cold start. You nee to clear the ram.
Then if it still gets stuck, reflash, but flash a stock rom first....
Cheers...
Related
Hello,
I finally had the nerve to flash to Black 2.5 with the latest hard spl. The issue I have had is when I do a soft reset, I would see the AT&T logo and it would just sit there. Sometimes I would have to soft reset it multiple times before it shows the Black 2.5 Splash Screen.
Any ideas? Bad flash? should I reflash?
Thanks!
Umm.. i guess reflash, i don't have this problem.
Well actually i did. I would soft reset and it'd get stuck in the beginning so i'd soft reset again then in get stuck in bootloader mode. I was on the road and was panicking. So i unplugged the battery and plugged it back in and it'd go straight to bootloader. Did this several times and gave up. Got home ready to reflash my device but something came up, So i just plugged it into the charger, took care of my business, came back 25 min later (still in bootloader) soft reset and it was back to normal. So my problem was low power.
fone_fanatic said:
Umm.. i guess reflash, i don't have this problem.
Well actually i did. I would soft reset and it'd get stuck in the beginning so i'd soft reset again then in get stuck in bootloader mode. I was on the road and was panicking. So i unplugged the battery and plugged it back in and it'd go straight to bootloader. Did this several times and gave up. Got home ready to reflash my device but something came up, So i just plugged it into the charger, took care of my business, came back 25 min later (still in bootloader) soft reset and it was back to normal. So my problem was low power.
Click to expand...
Click to collapse
had the same problem several times: startup takes about 3 minutes and after that my device is incredibly slow...
softreset again (and again sometimes) and the problems are gone.
did a hard-reset en restore, but this issue occurred again a few times.
now installed LVSW (23-04-2007) for a while to see if it's ROM related (I think is is). but Black still is my favorite...
firebird2k said:
Hello,
I finally had the nerve to flash to Black 2.5 with the latest hard spl. The issue I have had is when I do a soft reset, I would see the AT&T logo and it would just sit there. Sometimes I would have to soft reset it multiple times before it shows the Black 2.5 Splash Screen.
Any ideas? Bad flash? should I reflash?
Thanks!
Click to expand...
Click to collapse
This can be caused by allsorts of things, most likely a 3rd party app causing problems on startup.
What have you got installed?
The only app I have installed the latest version of Dashboard from snoopsoft and iLauncher that might affect startup. However, I had those installed with previous WM6 releases with no apparent issues.
Hi!
I had a quit similar problem. It was gone after cleaning up the root of my microsd. After moving the stuff into folders this behavior disappear.
It looks like if there are a lot of files in the root, I have problems booting up, and I have to softreset several times till it comes back to normal. Just my experience....
HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks
I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit
Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks
Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate
I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion
flash YUE back via SD card flashing
I already tried that, flashes fine, but becomes unresponsive soon after
have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta
A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now
What's up if you remove your MicroSD card ?
That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.
Hello,
I have Miphone M88 (WM6.1 Eng)
i flash it whit Rom WM6.0, Now my phone work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
please help me i have a big problem
Thx
I thought that I remember reading somewhere that when you flash your phone it does take quite a while before it's complete, and that the screen does stay white for quite a long time.
Mike
No, I wait until he terminate flashing, and when he reboot it came with screen white,
have you one solution now!!
Thx
I'm sorry I don't, I'm yet to flash my m88.
have you tried taking the battery out and leaving it for 10 minutes, and then entering the boot loader screen again and trying to re-flash?
Mike
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
can some help with this?
i have a clone m99 same thing as an m88 i guess the original rom img worked whe i flashed it when i downloaded the new 6.5 and tried flashing that all i did was stay at "downloading image please wait" and thats it. went to lift the phone up and the battery fell out not nothing works at all even with a fuly charged battery i cant even turn this stupid thing on. so im hoping anyone has any insight on what i could try and to to fix this.
p.s. i have left the beatery of for 30 mins and still nothing .....
help i got white screen too ;[ m88 after rom update only white screen and i cant do nothink ;[
Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.
Hey!
Im new to this forum but there seems to be a lot of experts here so i thought i'd try and see if anyone could help me!
Yesterday i put my desire to charge and after one hour i came back and it was showing the boot screen! The white background with the 3 green letters HTC! so i took out the battery and put it in again and restarted the phone but it only gets to that screen vibrates like 10 times and then hangs there! tried waiting for it for 30 min but nothing...
So then i tried to hard reset it and cleared the storage! but afterwards still the same!
Also when in "recovery mode" i sometimes see some green text flashing by for just a sec saying something like "warning...no image...."
Everything is in its original state, i havent rooted or reflashed it or anything... but i am willing to do so if it can solve my problems since warranty matters in my case will take ages!
The phones language is Swedish btw!
Can anyone help me?? its first now that u realize how much the phone means to you Miss my desire!
it sounds like the firmware is somehow corrupted. If you can boot the phone by pressing power and volume down, this will take you to the bootloader. From here you should be able to root the handset by following any number of threads here or on modaco!
Then I'd go Here and install this recovery. From then on you can choose a custom or stock rom to install.
You need to know though that rooting will void your warranty.
Have you also tried booting the phone normally with the SD card removed?