uber noob here
just got my htc hermes 100, wanting to update to WM6 (from 5) follow all the steps in page 1, did two things
save the RUUwrapper an that NBH file to my pc, while my phone is sync tried running the file and got error msg (the application failed to initialize properly (0xc0000135)
one last thing i did was copied both files in my phone and run it, got this msg this time (thid spplication (ruuwraper.exe)requires newwr version of ms.net etc)i'm lost, i know this is the 1st step i need to do to make it a WM6 ryt?
Hi...read mrvanx's guide before flashing:
http://forum.xda-developers.com/showthread.php?t=299462
You must to put hardspl on FIRST! U need to install NETCF on your PC. Do not put the ruu or rom files on your PPC and run them. Take Care
lordaxel said:
uber noob here
just got my htc hermes 100, wanting to update to WM6 (from 5) follow all the steps in page 1, did two things
save the RUUwrapper an that NBH file to my pc, while my phone is sync tried running the file and got error msg (the application failed to initialize properly (0xc0000135)
one last thing i did was copied both files in my phone and run it, got this msg this time (thid spplication (ruuwraper.exe)requires newwr version of ms.net etc)i'm lost, i know this is the 1st step i need to do to make it a WM6 ryt?
Click to expand...
Click to collapse
You forgotten one step. Please read the wiki on upgrading
i've just installed NETCF on my pc,copied the RUU_signed.nbh and RUUWrapper on a folder on my desktop (PC) and run the RUUWrapper file while my phone is sync to my PC and get this error ( the appilication failed to initialize properly (0xc0000135) .click on OK to terminate the application)
im not sure what to do next, this is the 1st step and i keep on getting errors, em i doing something wrong? please help!!!
lordaxel said:
i've just installed NETCF on my pc,copied the RUU_signed.nbh and RUUWrapper on a folder on my desktop (PC) and run the RUUWrapper file while my phone is sync to my PC and get this error ( the appilication failed to initialize properly (0xc0000135) .click on OK to terminate the application)
im not sure what to do next, this is the 1st step and i keep on getting errors, em i doing something wrong? please help!!!
Click to expand...
Click to collapse
Let mrvanx hold your hand READ!!
http://www.mrvanx.org/thg/ <------ cLIck hErE
OK I'll happily admit to being a NOOB as well but I have had exactly the same issue and I don't think (and I read the guides many times!) that the answer is there. So it is not helping simply endlessly pointing to the guides (helpful though they are).
The point seems to be that you need the Microsoft 2.0 .NET framework installed on your PC (i.e. the computer not the phone) rather than the NETCF mentioned above.
I think (assuming that I am right!) it would be great to add this clearly to the guide ("Make sure sure your computer has Microsoft .NET 2.0 Installed") preferably with a link to the Microsoft download site for .NET as well.
eliseman said:
OK I'll happily admit to being a NOOB as well but I have had exactly the same issue and I don't think (and I read the guides many times!) that the answer is there. So it is not helping simply endlessly pointing to the guides (helpful though they are).
The point seems to be that you need the Microsoft 2.0 .NET framework installed on your PC (i.e. the computer not the phone) rather than the NETCF mentioned above.
I think (assuming that I am right!) it would be great to add this clearly to the guide ("Make sure sure your computer has Microsoft .NET 2.0 Installed") preferably with a link to the Microsoft download site for .NET as well.
Click to expand...
Click to collapse
I once was a noob too, this is three months ago, and I had spent days on reading up before I did my first flash. The wiki is there just for that! hmm, also with .net framework, you'll be surprise how many software these days that will run WITHOUT them installed.
Hi . I had same problem with my 3 PCs. I downloaded latest version of .NET framework from microsoft site & reinstalled it & WOW.. it started..
zocster said:
I once was a noob too, this is three months ago, and I had spent days on reading up before I did my first flash. The wiki is there just for that! hmm, also with .net framework, you'll be surprise how many software these days that will run WITHOUT them installed.
Click to expand...
Click to collapse
.Net Framwork is required ONLY by software that is written directly for it and does NOT include the required DLLs in the app itself...which is most. C# is one language that you MUST have the framwork installed most of the time. Very few people want to include the DLLs because people SHOULD have the .Net Framework installed anywas.
This thread was very useful by the way. I'd come across this problem today and it's helped me to solve it. I'm sure any noobs (like myself) will find this thread useful in future.
Just wanted to add one thing, RUUWrapper was crashing on me as well.....
You cannot run this from a network drive! Has to be ran from a local drive, or it crashes...heh (I have a main file server setup over gigabit)
If you've read up then you have Hard SPL installed. That means you can bypass the computer for the flashing. You can use the sd card method. I believe its safer and doesn't have those niggly little sync errors and there's less chance of the phone crashing/being reset or powered off. Recommended if you flash the radio rom where a simple problem results in a permanent brick.
Cheers...
Related
Hi all,
i know this is a little bit off-topic, but I've posted it here in the Universal forum as it's relevant for those of us that have a Crossbow installation on our Universals.
you need version 4.5 of activesync installed to be able to sync.
there's my problem.
I can't get it to install.
the installer gets to about 95% and then the error message appears:
"There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personal or package vendor."
can anyone help with this problem?
without Activesync my Universal is (for my) useless. I need my contacts & calendar!
I'm putting my trust and hope in you - don't let me down!
Thanks!
Have you tried downloading it again from Microsoft's site in case the one you have is corrupt?
mmmm....
....seems an incredibly abvious thing to do!
have downloaded it several times though and from different machines.
have also emptied my TEMP folder on the PC before installation.
still no luck.
bugger!
"There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personal or package vendor."
Click to expand...
Click to collapse
Best option run filemon and see what's happening/failing. Try turning off any virusscanner/any other weird app, that might be running buggering up file operations.
symantec
i guess that our corporate virus scanner is interfering.
annoying. the previous installations never caused any problems.
i'll have to see if i can get it to install another way.
i'll post back if i get lucky!
could i install if i do a safe start in windows?
SOLUTION
UPGRADE YOUR WINDOWS INSTALL TO VER. 3.0 download from micros or google it
SOLUTION
UPGRADE YOUR WINDOWS INSTALLER TO VER. 3.0 download from micros or google it
it worked!
i keep getting reminders why i love this forum so much.
thanks to all of you for your help.
i only managed to try the solution today as i've been off work sick.
a HUGE thanks to PDAWHORE (nice name!), his/her tip to upgrade the windows installer software did the trick!
thanks to all and happy PDA'ing...
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Looks like a problem on your PC... (I mena for the Customruu crashing)
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Had this happen to me. I downloaded .net framework 3.0 from the M$ site and then it worked fine.
Maybe that will help you.
Jim
Need more info?
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Ok, first off, this is not a flame. It's an education, ok?
When posting a problem, it's best practice to let us know your:
Model of phone
Radio version
Boot Loader version
OS on your PC
ActiveSync version (s/b 4.5 by now)
Then, and only then, will you be able to get some intelligent answers. You also need to follow the link in my signature and there you will find answers.
If you're still stuck, usually re-downloading the RUU will result in a working ROM patch, unless you have other PC issues. You really need to fix that first, and the guides posted here are FULL of the diagnostic and troubleshooting steps that will propel you to a successful resolution.
Please read those posts, add your info, and you may be extremely pleased with the results.
Good reading!
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
First off; relax. At least the problem isn't with your phone. It's a heck of a lot easier to fix a PC.
I assume you've already tried to re-download the file?
Did you completely reboot your PC? Shut it down to power down, then restart. Make sure you don't have any extra USB stuff plugged in (like cameras, etc). If you have a PS/2 mouse and KB, use those, and not USB versions. One trick is to have the USB bus on your computer completely empty except for your phone.
Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). Reboot after installing it -- even though it doesn't tell you to.
Run Windows Update. Make sure you're OK on those.
If that doesn't work, try downloading another ROM (OS only) -- like the Cingular Black 2.02 or the LVSM ROM, and see if that works.
You can also strip it apart -- use WinRAR to open the EXE file that you've been executing and extract the .nbh file from the EXE. Then go and download this guy: http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU and extract it into its own folder. Copy that .nbh file into that directory, and execute the executable -- it will flash your phone with a known good flasher.
But.... stepping all of the way back ... if the ROM doesn't work on your phone, it's very likely reflashing it won't help a single bit. Those ROM's are checksummed when they go on the phone -- if they're corrupted, they won't load right in the first place (and you'd end up with a boot-loader only phone). Soo... uh.. first, reboot/clean USB, then try a different ROM.
Last resort will be completely reinstalling Windows XP. I've had to do this several times because Windows will get in some weird state and it refuses to flash my phone. I finally gave up and started flashing on my Mac using a Windows virtual machine -- it's a lot easier to restore my Windows system to a working point when I do that.
Thanks to everyone who gave a response!
Here's all the information i was asked to post ( i will remember this for next time)
Cingular 8525 HERM100
Radio version: 1.40.30.00
Boot Loader version: (Not quite sure what this is?)
OS on your PC: Pro Black 2.0
ActiveSync version 4.5
I have redownloaded the ruu about 3 times and it has failed everytime.
Restarted the PC, disconnected everything from my laptop, realized that i havent installed Framework .NET 3.0, ( although i have it on my phone as i needed it to run hitchhiker)
So i'm going to download framework .NEt 3.0 and run it.
As for my phone, i uninstalled all the apps, hard resetted and everything is working fine right now, hasn't froze at all since yesteray, so im going to wait it out and see if something happens again.
Thanks again to everyone!! This forum is really really helpful.
-Matthew
How to determine the bootloader version
newnoise1024 said:
Boot Loader version: (Not quite sure what this is?)
-Matthew
Click to expand...
Click to collapse
You need to have a look at your user guide, as it states how to enter bootloader and check the version. Otherwise press and hold the left OK button and the power button at the same time, then hit the reset button with your stylus. You will enter a tri-color screen. This is bootloader mode. Jot down the numbers and compare against the below link.
Exiting is simple, press the reset button with your stylus.
Here's a valuable link for updating your bootloader.
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
.Net Framework co-existence
newnoise1024 said:
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
Click to expand...
Click to collapse
You're probably missing version 2.0 of the .NET framework. .NET Framework is to be left in place once installed. You should have left V 2.0 installed and added .NET 3.0. Go to www.microsoft.com/net and get version 2.0 redistributable re-installed on your machine. (If you can). If you cannot, search the KB and you may get by without rebuilding your OS.
"Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). To be extra safe, go into Add/Remove Programs and uninstall any existing versions -- reboot -- then install the new CF Framework. Reboot after installing it -- even though it doesn't tell you to."
this is the advice i was given in this thread, so i uninstalled version 2.0 before installing version 3.0.
So am i screwed now? lol
Well, version 3.0 just installed successfully... does that mean i still need to install 2.0? or am i fine just running 3.0?
Sorry for all the questions, i just want this fixed :/
You should be good. Give it a go.
If not, just dl .Net CF2 and install that. I think you are fine now though.
Edit: never mind
version 2.0 installed fine
Thanks everyone
I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.
Apologies if this has been covered elsewhere, but a forum search revealed nothing...
How do I install .NET 3.5 on my Touch HD?
I have installed Advanced Congif , and it tells me i need to install .NET in order for it to work.
I downloaded the .net redistributable file from the MS website (filename is NETCFSetupv35.msi), but when I try to run it on my HD as I would with a .cab file, it tells me there's no associated program to run it.
I guess it has to be installed some other way (through ActiveSync maybe?), but I don't know.
Any helpful soul out there care to put me out of my misery?
Cheers in advance
Pete
Yes it has to be done through Activesync.
run it on your pc, and it will install on your device (or next time you connect if you're not connected when you run it)
It says on the microsoft download page...:
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
and
Instructions
Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Change.
Do one of the following:
To start the installation immediately, click Open or Run this program from its current location.
To copy the download to your computer for installation at a later time, click Save or Save this program to disk.
...
Use a CAB
myearwood173 said:
Yes it has to be done through Activesync.
Click to expand...
Click to collapse
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Link:
http://www.fileden.com/files/2008/7/1/1983933/Microsoft_.NET_CF_3.5.CAB
Thanks!
Thanks guys,
sorted, using the .cab (couldn't work out how to do it with Activesync).
Can't install :-(
Nooo! I have a problem...
I had some trouble with .NET CF 3.5, and then I wanted to reinstall it, but when I uninstalled it, and then tried to install it again, it didn't work.
It doesn't work through ActiveSync AND the cab. Do anyone know whats wrong here, or do I need to start a new thread?
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
hanjoster said:
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
Click to expand...
Click to collapse
My ActiveSync is okay, and the cab is from the microsoft site...
EDIT:I think something is wrong with my phone, but I don't want to do a Hard reset.
Installed no problem if you use your PC to get the CAB just pop in onto the memory card, bung it in your phone and using file explorer locate file and install onto your device. Easeeee
Even easier would be to use PIE and visit this site/thread and follow the link to download directly onto phone then do above in File Explorer
http://www.fileden.com/files/2008/7/...NET_CF_3.5.CAB
Thanks clb92
clb92 said:
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Click to expand...
Click to collapse
Thank you! Worked like a charm!
.NET 3.5 cab
bro,
.NET 3.5 is available as cab for direct installation on to your phone. Copy in to your phone / storage card and install in phone memory. I have installed on my HD stock rom and works fine. Here it is .... hope this will help, this is my first response to a mail and hope what i do is right. thanks Dr Shaheed
This app is designed so that you can keep track of any medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription.
It is designed to be used for multiple patients, surgeries, pharmacies and doctors.
It was initially an Access database but I thought that migrating it to my PPC was a challenge I might be able to complete.
There will also be the ability to log doctor's appointments as well, hopefully.
All data is currently stored in an SQL-CE database.
For reasons I am currently trying to solve, when you open any secondary form with a data table and then return to the main menu you are unable to go back into any other form again.
Changed to a tabbed layout, screen shots attached.
09/02/2011
New version attached with new format SQLCE.
17-Mar-2011
Latest version attached
All data entry and editing working - I hope.
08-Apr-2011
Latest version, autoscroll and popup SIP.
Possible dependant files.
I am coding for CF2.
[Reserved] - For Comments
deedee said:
[PROJ] Prescription Medicines Manager
...medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription...
Click to expand...
Click to collapse
Thank you!
These records can be life-saving if you have them with you at the right time. I have tried many systems of keeping track, but rarely managed to have anywhere close to this much information on hand.
I have not had time to try it out properly so I do not yet have any comments or suggestions. For now, I just wanted to say THANKS!
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
deedee said:
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
Click to expand...
Click to collapse
Don't feel rushed on my account. It's great that you're interested in this project, whenever you finish will be soon enough.
Meanwhile, I'll play with it and start planning how to "feed" it my information.
Have you considered some sort of encryption? It just occurred to me that it will hold a lot of very personal information.
Again, thank you.
deedee said:
...at the moment editing is also broken...
Click to expand...
Click to collapse
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Jesterfell said:
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Click to expand...
Click to collapse
Unfortunately the WW editor is designed for an XML file and this app keeps everything in an SQLCE database. I am trying to find a nice, useable and, more importantly, free desktop app to edit these files and am trying a couple out at present.
While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone.
New version added to post 1.
You can now add records.
For desktop managemnent try
SQLCE Desktop Manager
FlyHoward SDF viewer
Neither of these seem to be free though the second one does have a 14 day trial.
deedee said:
... While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone...
Click to expand...
Click to collapse
Of course!
Sorry, I got tunnel vision and forgot the project's purpose.
What am I missing?
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
SQL desktop applications
I found some free SQL desktop apps. I was only able to get one, SdfBrowser, to read MedicalRecords.sdf and all it allowed was viewing the structure and creating a query.
I'll keep looking, but I agree with you that being totally portable is very important for this project.
LINKS: SdfBrowser --- Resources link
Jesterfell said:
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
Click to expand...
Click to collapse
Completely forgot to say, you will need to install SQL CE on your HTC.
I do not usually resort to smileys, but my lack of knowledge is frustrating!
deedee said:
Completely forgot to say, you will need to install SQL CE on your HTC.
Click to expand...
Click to collapse
I installed SQL CE with no errors but got the same lack of results. The phone did become VERY sluggish and Task Manager still showed "prjMedicalRecords" running as a process.
Does prjMedicalRecords.exe need to be installed?
I just executed it from the SD card, and then tried it from the device memory. I placed MedicalRecords.sdf in the same directory each time.
Update: After about 5 min of the WM wait animation spinning, got the following error message:
"File or assembly name 'System.Data.SqlServerCe,Version 3.0.3600.0, Culture=neutral, PublicKeyToken=3BE235DF1C8D2AD3', or one of its dependencies, was not found."
I opened the SQL CE .CAB file and it DOES contain "system.data.sqlserverce.dll" it is meant to be installed to "%InstallDir%" and the rest of the DLLs go to "%InstallDir%\v3.5". I used file explorer to look in those directories (%InstallDir%="Microsoft SQL Server Compact Edition") but did NOT find "system.data.sqlserverce.dll" in either dir.
I copied the DLL to "%InstallDir%\v3.5" and ran the program again. The same results occurred.
After soft reset, copied the DLL to "%InstallDir%" and ran PMM again. The same thing happened, long wait, then error msg.
I am falling asleep now, but will try re-installing .NET 3.5 and running PMM again. I'll let you know what happens.
I had gotten the same error before installing SQL CE but did not connect the error to PMM so I ignored it. This time nothing else was happening on the phone.
Apologies for not giving the initial steps, I am new to development and forget others need to be given the assumptions.
SQLCE needs to be installed, as you have done. PMM is just an exe, copy it to the device.
PMM and the SDF file need to be placed in \Program Files\prjMedicalRecords on the device itself. At the moment this location is hard coded and is on my list of things to do to make it "moveable". HTH
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
deedee said:
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
Click to expand...
Click to collapse
Sorry, Deedee. It still does the same thing.
.1. I put both files in device memory (just in case): \Program Files\prjMedicalRecords\
.2. Tried to re-install NET framework 3.5--it refused to install in either device or card memory, saying the same version was already in ROM.
.3. Re-installed sqlceppcwce5armv4i.cab
.4. Ran prjMedicalRecords.exe
After the same delay, it gave the same error.
It also gave a NET error that, because of the delay between program launch and errors, I did not associate with Medical Records before, but it only occurs after I have launched prjMedicalRecords.exe:
"The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET compact Framework is recommended. Support info: -2147483643 (80000005)"
Thank you for your continued interest.
Not sure what the error is pointing to but I am coding for .Net CF v2, CAB in post 2, try installing this.
OK, finally tried this on a virgin device, without using the "debug" option in VS2005 to copy the files and discovered that .NET CF2, along with SQLCE 3 and SQL CE 3 replication is needed.
All CABs are in post 2.
There is a new version hopefully out this weekend with the ability to log patient medications and doctors appointments.
Editing is still on the road map, as is deletion.
New version in post #1, CAB format as well.
Make sure all the dependencies are installed, for me this has been .NET CF2 and the SQLCE cabs.
There are bugs I am aware of but please list anything and everything. As this is my first real App any feedback is welcome.