vonage on htc - HTC Excalibur

i realy need uk vodafone settings
after upgrading from wm6 bt anywhere s 620 to WM6.1 For Excalibur By Kavana 080408 i cannot find any where the vodafone uk setting i have searched and serarched cant find any thing.and what i can find do not corisponed with settings in phone please help

found them thanks to flashed my 620 with the original BT rom and found these settings for GPRS and GPRS MMS, then put the “RUU_Excalibur_WM61_Kavana_080408_WWE” rom back in.
Go to Settings, Connections, GPRS and add the 2 following settings they seem to work, (will let you know when I get my next bill in )
NAME BT GPRS
CONNECT TO THE INTERNET
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
NAME BT GPRS MMS
CONNECT TO WAP Network
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)

hello i have a vonage account that i never use can the htc s 620 be configured to work [wi fi] using my vonage account this would be exelent since i have lost my bb anywhere by upgraging to 6.1
many thanks in advance

Since the s620 does not have 3g I have not considered internet dependent applications (ish). That being said it might be easier to get skype running instead.
http://www.skype.com/mobile/

i have instaled skype but never got it to work any ideas

Related

O2 Setting for Charmer

hi, i have searched for o2 for htc charmer,with no luck.
will some one direct me please or help to get these setting.
will the executive o2 setting work on charmer?
Go into Connections, Then under My ISP, Add a new modem
Name is O2 Mobile Web
Modem type is Cellular Line GPRS
Next>
Access is mobile.o2.co.uk
Next>
Username is mobileweb
password is password
domain is blank
and finish. This will get GPRS working on Contract O2 for internet explorer/email etc

no network after upgrading

Hello,
I recently upgraded my TyTN with the official wm6, but can no longer connect to my network. The network is a wpa2+eas, the network key is 8 characters. On the TyTN, I have tried all combinations with "networkcard connects to internet or work" and the with "network connects to internet or work".
The TyTN start connecting, but fails. For some odd reason, it also always seems to forget the wpa2-psk key, which makes me wonder if it is a problem with this...?
I have tried a soft reset, but to no avail.
Any suggestions?
Thanks!
Jörg
Werid...if I set the IP address (+ subnet + gateway + dns + ...) manualy, it works. So it is not getting an ip address.
When I choose to get an ip address from DHCP, there is a read only (grey) ip address box. Oddly, this shows a number composed of 4 groups of 4 hex values. Could it be expecting to get an IPv6 address?
If so, is there a way to tell it to take a regular IP address?
Jörg
I fooled around a bit more, and now it works...
EDIT: It doesn't anymore.
Any thoughts?
Jörg
I think I found the issue: I also had the profile of an adhoc network. Apparently, this adhoc network uses IPv6, causing the network card to only allow IPv6 adresses. As my wifi is IPv4, the wm6 device never gets an IP number.
Removing the adhoc profile made it work.
Jörg
I bet you try to connect to a network with hidden SSID.
This will not work as in WM5.
If so, the solution is simple. Within network definitions you have to check "connect to non visible network" or in German language:
Einstellungen -> WLAN ->Menü -> Netzwerkkarten -> "Dies ist ein ausgeblendetes Netzwerk"

hermes(m3100) wifi problem - help please

i have a orange m3100 version of the hermes.
recently i flashed it with schaps 3.54b rom
now i can't use my wifi router/network @ home nor another wifi router/network @ work.
in fact i'm well connected, i'm sure of this because from another computer of the networks, i can ping the (static) ip of my hermes. i tried changing and changing again my ip and tested it.
but the hermes cant go on internet.
i use the right gateway and DNS in each case but no surf in pocket ie.
any solutions or other tests i can do?
in french if possible since i and my rom are in french.
thank you.
update : i made some tests :
it is nos a dns problem : i put the right gateway and dns on the smartphone but i cant get a website by typing its ip in pocket ie adress bar (other browsers dont work better) and i cant even access my router admin interface.
when i'm trying wifi with static ip or dhcp on my m3100, i can ping its ip from another computer of my networks and the smartphone responds ok, and i can see its mac adress in the connected clients on my router config screen. But the smartphone can't ping anyone.
i asked a friend who told me that the proxy (192.168.10.100 :8080 ) used for the connection to orangeworld in gprs/edge is also used when i try to connect via wifi and that is why it cant connect nowhere because my personal network is configured differently and without a proxy.
if i delete the proxy my connections will cost me more when i use gprs.
if i configure my router like this (192.168.10.xxx) with a proxy on 8080 it could work but only on my network and not @ my workplace or somewhere else where network params will be different.
any ideas or solutions ?
wow ! so many people trying to help :/
well i found a temporary solution to my problem, probably not the best one but the best i can do by myself so if someone wants to help : thank you
it was actually a proxy problem.
i looked in the registry and found a key where the proxy adress was detailed : 192.168.10.100:8080
i have exported this value as "proxon.reg"
then i modified the value by deleting its content and i exported the empty value as "proxoff.reg"
now i have my "proxy switch".
before activating the wifi and starting ie, i lauch "proxoff.reg" which clean the registry for the proxy data and magic : ie connects fine.
and when i want tu surf via my provider orange, i desactivate the wifi and launch "proxon.reg" which restore the correct proxy data to the registry. and i can surf on gprs/edge.
all this is fine when i switch off the phone functions in the comm manager.
but now i need someone to tell me how i can automatize this for the wifi and edge connections because if the wifi signal gets too weak, i dont want my phone to switch to the gsm when the proxy is desactivated.
i hope you can understand my english.
please help.
In the last version of BatteryStatus (http://forum.xda-developers.com/showthread.php?t=270751) you can find,among the others stuffs, the "Disable Proxy for WiFi" option (see the Tools tab)... Maybe more simple than "regg-in" on and off? I'm ok with it, try and see if it's ok for you also...
Bye!
hey kamaal i just downloaded the batterstatus program but im not seeing the "Disable Proxy for WiFi" option in the Tools tab
***edit:
sorry i downloaded the extended version beta and it was there

WM6.1 with BT network coverage

Hi All
I have the BT Anywhere HTC620.I upgraded to the "RUU_Excalibur_WM61_Kavana_080408_WWE" but i carnt find the BT network in the phone settings only Vodafone Orange O2 & T-Mobile. can it be changed over? or will i have to stick with WM6.
Thanks
si86
Hi.
BT Mobile uses the Vodafone network and that's what it displays on the homescreen.
Beware, the Vodafone settings wont allow you to SMS/MMS as you AREN'T a Voda customer.
http://www.filesaveas.com/gprs.html
Click to expand...
Click to collapse
has the settings or you could try
www.mobileservicesettings.bt.com/mysp_bt/html/login.jsp
Click to expand...
Click to collapse
Haven't tried this but I think it sends the BT settings to your phone.
There is also 'BT Services' under the Start menu on mine, but that might have been added automatically once I set it up manually - worth a look though.
Hope it helps.
Thanks i will give it a try
si86 said:
Hi All
I have the BT Anywhere HTC620.I upgraded to the "RUU_Excalibur_WM61_Kavana_080408_WWE" but i carnt find the BT network in the phone settings only Vodafone Orange O2 & T-Mobile. can it be changed over? or will i have to stick with WM6.
Thanks
si86
Click to expand...
Click to collapse
Which settings are you missing?
I use Ricky's ROM v23 and BT Anywhere.
Adrian
Does it show BT for the network, cos mine is on Vodafone. Another thread say the BT use the Vodafone network. could you point in the direction of "Ricky's ROM v23 "
and i will give it a try. I have even put the original BT rom back in and found the network code for BT (23415) and with wm6.1 it still comes up with Vodafone.
si86 said:
Does it show BT for the network, cos mine is on Vodafone. Another thread say the BT use the Vodafone network. could you point in the direction of "Ricky's ROM v23 "
and i will give it a try. I have even put the original BT rom back in and found the network code for BT (23415) and with wm6.1 it still comes up with Vodafone.
Click to expand...
Click to collapse
Ricky's ROM is available here...
http://forum.xda-developers.com/showthread.php?t=397845
See attached image for my homescreen showing provider as Vodafone (aka BT Mobile)
Adrian
Thanks, i will give it a go
BT GPRS / BT GPRS MMS Settings
Hi All
I flashed my 620 with the original BT rom and found these settings for GPRS and GPRS MMS, then put the “RUU_Excalibur_WM61_Kavana_080408_WWE” rom back in.
Go to Settings, Connections, GPRS and add the 2 following settings they seem to work, (will let you know when I get my next bill in )
NAME BT GPRS
CONNECT TO THE INTERNET
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
NAME BT GPRS MMS
CONNECT TO WAP Network
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
Thanks for the settings, just gone with the upgrade 2 and it looks sweet.
How do i get the settings for answer phone?
BT.png
Just done this so as you can have the Forum or any other BT site on your Clinks.

standard proxy settings

hi,
i am new to windows mobile. i am trying to connect to internet using my mobile over bluetooth/wifi. I can connect to active using either of them.
To access internet we have to use a http proxy with authentication for internet & specify 'no proxy' for internal websites.(for browsers)
in windows mobile, where should i specify these settings? I went to settings--> proxy and added http proxy, but couldn't figure out those 'connect from' work, wap etc. (connect what from what?)
i can access internal websites. using kavana's wm6.1
pay for unlimited web like the rest of us..i pay $30.00 every month for mine
and if everyone was paying for the unlimted internet maybe it would be cheaper than these people trying to set up proxy's
F$#k Proxy hack
If that's the way you want to go I suggest do a search/or google it 'cause I agree with hovax, the more people hack proxy's the more money we have to pay for our unlimited plans. I'm not speaking for everyone , but I know a lot of people here pay for their plan, rather than steal it.
well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it
timepassman said:
well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it
Click to expand...
Click to collapse
s**t outta luck
hi i have the 20.00 unlimted internet plan. is there a better proxy setting for the dash? because sometimes all the applications (sky fire, PIE, flick) refuses to connect to EDGE
okay im going to breakdown US only i dont think india has this
WINDOWS MOBILE 6.1 INTERNET SETTINGS!
ok first of all both of you guys that posted settings, they will work for the older versions. Good job for that cuz of the million tmobile phones I used that on!
Here are the settings for WM6.1
settings
connections
gprs
edit the existing T-Mobile Data with the following
connects to: wap network
access point: wap.voicestream.com
username and passwork: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondaty dns: 0.0.0.0
ip address: (leave blank)
now go back to connections menu
select gprs
select New...
name: tmobile gprs
connects to: wap network
access point: wap.voicestream.com
user name and password: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondary dns: 0.0.0.0
ip address: (leave blank)
now go to proxy from the connections menu
add new proxy
name: tmobile proxy
connects from: wap network
connects to: the internet
proxy (name port): 216.155.165.50:8080
type: HTTP
username and password: (leave blank)
now go back to the connections menu
click menu
select advanced
set all connections to automatic
now open IE
click menu
select tools
select options
select connections
check automatically detect settings
select network: wap network
I know you shouldnt need to GPRS accounts but for some reason on certain WM6 phones it ONLY works with both, doesnt matter if you have one or the other it wont work unless you have both (on certain phones), mine as well just put it all in, wont hurt anyway
P.S., this was all tested on 4 different t-mobile dash phones
Edge and IE work fine on any of the T-Zones plans with these settings on the dash just pop them in to Settings / Connection /
http://www.htcwiki.com/page/The+Dash+FAQ
NEXT TIME DO SOME RESEARCH GOOGLE IT OR USE THE SEARCH FORUM ABOVE^^^^ and maybe you wont have to ask stupid questions. most of this stuff is already on the web you just have to SEARCH
if it's not on the forum look at some other sites because most likely there's people like us that's had this problem before and solved it already.
there is already a tread regarding it
http://forum.xda-developers.com/showthread.php?t=374413

Categories

Resources