Hi, I have the IMate PDA2k (Blue Angel).
Here is my question. When you are connected via Bluetooth Headset and GPRS you get the little icon at the top (the one that would normally show if you are not using bluetooth and just GPRS and you got a missed call, the one with the bubble that its trying to tell you something). Now when I run bluetooth headset and gprs it shows the bubble icon. Everytime I load my phone up I think I had a missed call or a SMS message. Then I go to click on it to check and it just shows the GPRS icon and bluetooth headset icon.
Is there any way to change this? To have them appear side by side? I think it did this on the HP 6315 but I am not sure..
I know that wisbar would do this but they still are working on their phone edition version.
Thanks!!
John
I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!
I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback
Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html
hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
Hi,
I am look ing for a SIMPLE today plugin to fast switch on/off BT. I have tried a dozen but none of them seem to work. Strange. I used to have a HTC Universal (WM 6.1.) and there the BatteryStatus (name of the program) worked like a charm (even the last version homescreen_plusplus doesn't work on the rhodium) I tried exe versions (like BtOnOff.exe)and cabs (like BlueTogglerSetup). So I am starting to think I am missing sth. Anybody a suggestion?
Oh yeah, the indicators do switch on of these plugins (when i switch on BT trough settings-connections) so they detect the state of BT but are not able to switching on them selfs?
Help welcome!
thx in advance
greetz
Kjoere
(damn, i am missing my solid universal!)
Read the very first post in this forum! The very first paragraph. The search function works well ;-)
Pro2 use a different bluetooth stack than all previous models. Currently I have not seen other BT toggles that is working, but I expect they will come later.
I have CommManager assigned to the send button, so it is no big issue for me.
The biggest issue is, that the BT headset controls are hardcoded to WMP/HTCPlayer, so I can not use my favorite mediaplayer.
thx
thx, yeah I searched and read about the BT problems.
I just wanted to check in to see if there was sth new going on this front.
I hope you didn't mind too much.
In the mean time I assigned comm manager to a soft key in combination with 2 today screens it is feasable, but definitely not sth I want as a final result.
greetz,
Kjoere
Hi,
I wanted an Internet Sharing button in my Comm Manager so I used Advanced Config to create one. It did so but for some reason it used a version that doesn't allow PAN Bluetooth connections with the PC. I found that there are 2 internet sharing exe's - one is called IntShrUI.exe and doesn't have Bluetooth PAN and the other is IntShr.exe which does.
I've searched everywhere and nosed around the registry but cannot find where to change anything so the button in Comm Manager launches the right one. I even thought of just replacing IntShrUI.exe with IntShr.exe by deleting/renaming but the files are locked.
Does anyone have any ideas? Unfortunately my last query about showing all a day's appointments on the TF3D Home screen didn't get me any help so maybe I'm just asking daft/too difficult questions?
I'd be extremely grateful if anyone can help me out here.