Develop Bugs

Hard-SPL 1.30 MFG - Oli

The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!

Great as always!

Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...

great!! thanks to Olipro!

Great so quick
Thank you so much.

great works
thanks

Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread

I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID

Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus

xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device

Thanks for the hard work.

Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro

Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?

am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do

HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.

I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...

New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog

banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready

I'm still waiting.

thanks to Olipro
I am waiting...

please help me updsating to wm6..so many problems for a noob

hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year

Dude, you should use search function!
There are many link to Error 246
I suggest read this:
www.trinityguides.info
Here you can find everything. Error 246 too...
This is the rom flash Bible by racer_x!

Jeanxito said:
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Click to expand...
Click to collapse
From reading the above - I don't believe that the 246 error is your problem. (The 246 error is due to the Rom Upgrade Utility not waiting for the trinity to reconnect in bootloader mode - as soon as the connection is lost you get that. as you have seen, by restarting the RUU - or only starting the RUU when the phone is manually in bootloader mode - you can get the ROM loaded.)
I believe your problem is the stuck at 1% trying to flash the dopod ROM.
My 2 cents: forget the DOPOD ROM - it really is not as good as the cooked ROMs - in this case - "official" is not better.
The 1% sticking problem is a problem with this ROM.
Download another ROM (which one is not an easy question - but I have heard good things about sammy_deluxe ROM if you're looking for a portuguese ROM) and try updating with another ROM. it will work. Patience!
Happy new year to you too

[SOLVED] Touch Diamond Help - No Network after hard reset

Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.

can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems

Have you gone to start/ settings / connections "connection setup"?

Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active

NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM

When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description

I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please

Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??

hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?

I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)

@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?

As its unlocked by code i would recommend you to flash a shipped rom !

Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious

if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...

I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.

FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.

Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?

FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here

Cannot upgrade my dopod838 pro..

Hello..
I got dopod 838pro Spl 2.03..
I want to upgrade it but everytime i did i got the same answer..
ERROR 270, ERROR 260..
Already try on both vista and xp..
Hard SPL and Custom RUU also got the same stituation..
I found out that using unbrick.bat, splexploit and so on..
Can someone teach me how to use this splexploit step by step please because my dopod 1 week already "sot"..
I can't understand how to use it..
Thanks..!

Go to Here - http://forum.xda-developers.com/showthread.php?t=296722
Page 116, post 1160.
You NEED Hard SPL V7.....
Afterwards, just drop the steps using SSPL.exe to upgrade ROMs...

O2 xda diamond flashing problem

I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language

make manual usbflashing threecollor settings and use normal ruu for flash.Maybe im more time use for ole htc diamond because show me message low battery but battery is full 70-80 % and im use usbsettings <threecolor menu> and flash

a_2004_81 said:
I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language
Click to expand...
Click to collapse
Hi, I also have an o2 xda ignito...Download the attached file, and extract "SSPL_Manual" onto your phone and run it, the screen will go blank...now just flash with hard spl olinex 1.93 unsigned by running "DiamonCustomRUU" and then flash the rom of your choice.

Yessss it's working now
Yes it's work . Thanks for all supporting.............