Develop Bugs

Original ROM and SPL

Hi
I am so sorry to post this stupid question as I know it has been answered somewhere but I just can't find the answer even though I've been searching for hours now.
The problem is I want to rollback to original ROM and SPL for warranty reasons but I can't remember what it was original, so how do I figure this out? If it helps my phone was one of the grey diamonds from expansys bought around june 6.
TIA and again sorry for the stupid question.

This really suck for you I know, but think that maybe it's not possible to find out

u can use any version of original ROM and SPL, it does not matter for warranty reasons!
WBR

Radissen said:
Hi
I am so sorry to post this stupid question as I know it has been answered somewhere but I just can't find the answer even though I've been searching for hours now.
The problem is I want to rollback to original ROM and SPL for warranty reasons but I can't remember what it was original, so how do I figure this out? If it helps my phone was one of the grey diamonds from expansys bought around june 6.
TIA and again sorry for the stupid question.
Click to expand...
Click to collapse
That's why is really important to put the info about your device in your signature, to note the info about your device before flashing it.

Thanks... After a hard nights thinking I am almost a hundred 100% sure that my stock ROM was 1.34. Then my stock SPL must be 1.34.nbh right?

.....................

Radissen said:
Thanks... After a hard nights thinking I am almost a hundred 100% sure that it was 1.34 that was my stock ROM and SPL. Doesn't that sound about right?
Click to expand...
Click to collapse
Had you try to register your device with his S/N, on the "e-Club HTC" and look at a ROM update available, probably newer than the original one ?
Just because you could keep your warranty with it.

I can't register my phone at the site because it was a grey import.
But I am pretty sure it was 1.34.xxx.x and that must mean that the ones I should use are: stock ROM 1.34 WWE and the stock SPL 1.34.nbh right?
Found this link:http://forum.xda-developers.com/showthread.php?t=402876&highlight=expansys

Radissen said:
I can't register my phone at the site because it was a grey import.
But I am pretty sure it was 1.34.xxx.x and that must mean that the ones I should use are: stock ROM 1.34 WWE and the stock SPL 1.34.nbh right?
Found this link:http://forum.xda-developers.com/showthread.php?t=402876&highlight=expansys
Click to expand...
Click to collapse
Normaly, yes.

Pakages original SPL 1.37 for multi regional
http://tom.x-files.lv/SPL/
Cheers..!

tom thanks for this link but i dont know to found my region (esp). your file have same folders:
CSL_001
HTC_001
HTC_023
HTC_405
HTC_E11
HTC_J15
Which I choose?
thanks
tom_codon said:
Pakages original SPL 1.37 for multi regional
http://tom.x-files.lv/SPL/
Cheers..!
Click to expand...
Click to collapse

Fabliv said:
Normaly, yes.
Click to expand...
Click to collapse
Great... Thank you...

tom_codon said:
Pakages original SPL 1.37 for multi regional
http://tom.x-files.lv/SPL/
Cheers..!
Click to expand...
Click to collapse
tom sorry 4 buggin,..
but my original SPL was 0.93.25.NS26
If U have could U share this please??
My diamond is (was)
r 0.93.25.NS26
g 52.26.25.09G
d 1.35.00.00 I'm from Holland it was a SimlockFREE phone
by the way

I need radio 0.93.25.NS26 how can I get it?

[UPG]HardSPLs 1.23, 1.24 and 1.34

Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL

perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?

Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.

Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device

Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not

will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing

Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.

jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)

Thanks jocky bro..!
It works just fine

i installed 1.24... it works although i can't see anything special.

@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.

SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.

works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!

Great release Buddy still using your first beta

HardSPL v1.34 added to first post.

jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times

I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.

Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here

jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.

so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?

olinex 1.40 signed upgrade

hi guys
to save my sanity the orignal thread on this has become so long with so many serparate queries.
I am currently running signed olinex 1.30 but need to upgrade to signed 1.40 so i can upgrade the radio
please can someone post here the direct link to the olinex 1.40 signed file
and finally any ohter factors i should be aware of in this process
many thanks in advance
i will be keeping the ROM as current on RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship

help as per :
as per guide on signed upgrade on racerx site :
http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=2
this semms to link to older files.. if the duirect file in question her could be linked in this thread i would be very grateful

I have made signed radios available here:
http://htcroms.aplace4u.biz/signed/radio/
Will work fine with your signed 1.30 Hard-SPL

hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S

porkmince said:
hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S
Click to expand...
Click to collapse
I'm positive, i signed them myself, and have used them on my own Diamond

indeed you are correct sorry for questioning you
radio upgraded and ready to rock
thanks for the confirmation
a bit new to all this so thought always better to check with someone that knows
cheers

Sure, no worries.

Thank you very much Corian, very useful !!
Worked perfectly with my Olinex 1.30 signed Hard-SPL.
I think global perfomances (TF3D) have been improved.
Bye

hi, sorry for reviving an old thread but i gotta know, if i want to upgrade my 1.30 signed to 1.40 or .193 unsigned, should i just run the ruu or jump spl first? thanks!

Diamond HardSPL OLINex v1.40

Everything in the Wiki http://wiki.xda-developers.com/index.php?pagename=Diamond_ExtractedRadioRoms tells me to put : Diamond HardSPL OLINex v1.40 to upgrade my radio on the diamond.
I've gone through every thread i can find mentioning v1.40 but couldn't find it. I've managed to find every other 1.23, 1.24, 1.34 http://forum.xda-developers.com/showthread.php?t=415191 and 1.38 http://forum.xda-developers.com/showthread.php?t=400402
Can anybody point me towards 1.40 ? please don't answer telling me to search the forum as i'm tired of doing it for past 3 days. Just give me the link to the file please

hope this helps
. Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
Hard-SPL 1.40 Olinex Developer Edition-unsigned (flash at your own risk)
Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL (if you're having trouble with the other hard-spl's)
here is a link to that page
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26

I've seen this and it again takes me to this URL http://forum.xda-developers.com/showthread.php?t=400402
This page has 2 files :
Hard-SPL-Diamond-OliNex.zip (1.92 MB, 13583 views)
HardSPL_OliNex138_Signed.zip (137.4 KB, 2082 views)
Now none of the above says 1.40, so is it the 1st one ?

hi
sorry but what's the difference between the Hard-SPL 1.40 Olinex SIGNED and the Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL in general?
sorry to get on your thread ninthsense as i don't mean to go off topic

ninthsense said:
I've seen this and it again takes me to this URL http://forum.xda-developers.com/showthread.php?t=400402
This page has 2 files :
Hard-SPL-Diamond-OliNex.zip (1.92 MB, 13583 views)
HardSPL_OliNex138_Signed.zip (137.4 KB, 2082 views)
Now none of the above says 1.40, so is it the 1st one ?
Click to expand...
Click to collapse
Yes, 1.40 is the first one. I have installed it and then loaded Dutty's ROMs and it all works fine.

andy2111 said:
Yes, 1.40 is the first one. I have installed it and then loaded Dutty's ROMs and it all works fine.
Click to expand...
Click to collapse
Thanks a lot Andy . I'll givr this a try now

HELP
When I Flash In D 1st One... It Flashes Olinex V1.30 On My 1.93.720.2 Rom.... Please Help N Tell Y??!
I Hav Olinex V1.40 Installed But Is Unassigned....
Wat Difference Does A Signed N Unassigned Have??
Is It Just Like Legal N Illegal Thing..??! Or Sum Performance Difference Or Wat..?!
N Its Fine Using D Unassigned One...??
Ne1's Help Would B Highly Appritiated..... Thanks

signed / unsigned
with Hard-SPL 1.40 Olinex Developer Edition-unsigned you can flash signed and unsigned Rom's
with Hard-SPL 1.40 Olinex SIGNED you can only flash signed Rom's

sparkienl said:
with Hard-SPL 1.40 Olinex Developer Edition-unsigned you can flash signed and unsigned Rom's
with Hard-SPL 1.40 Olinex SIGNED you can only flash signed Rom's
Click to expand...
Click to collapse
1)how do we get to knw tht dis 1 dat's flashin up is signed or unsigned?! or how do we check...?!
2)whn i do volume down n soft reset in dere its showin me 1.40 olinex.. so it means it signed or wat?? or plz answer d 1st question

QUOTE=rorydaredkign;2313205]It means you can only install signed ROM's, i.e ones form HTC, Carriers, or ones signed by Olinex and the other people in Elite Team. And they won't sign ranodm crap, so gives you safety- if it's signed, it's ok to flash it.
Unsigned means you can install any random ROM you like, cook your own easily and install it without any fuss.[/QUOTE]
Here is the answer on your question

hi
i can´t change from 1.24 to 1.40
the update is processing and the device is restaring but it shows always 1.24
please help

You probably have to use SSPL to install another SPL.
See here for more details: http://forum.xda-developers.com/showthread.php?t=416211

thx - it worked
http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1
i made it with this tool: diamond-sspl.bat from the 1.23 & 1.24 package and after black screen on my diamont, i started ruu from 1.40

I am happy for you that it worked.
Have fun

Olipro Bootloader removable?

Hi
I want to send my hermes back to o2 because the IE-Hardwarekey doesn't work anymore. My bootloader-config:
ipl-1.04
spl-2.10.olipro
What should i do? Leave my hermes as it is oder remove the olipro or what?
thnx

PelloG said:
Hi
I want to send my hermes back to o2 because the IE-Hardwarekey doesn't work anymore. My bootloader-config:
ipl-1.04
spl-2.10.olipro
What should i do? Leave my hermes as it is oder remove the olipro or what?
thnx
Click to expand...
Click to collapse
You need to remove HardSPL or they wont fix it without charge
see this guide how to downgrade

ok...thnx man.

PelloG said:
ok...thnx man.
Click to expand...
Click to collapse
Your welcome!
Make sure you stick a stock WM6 on there as well

i flashed it (spl 1.04; like it is written in the guide) but no success. Olipros hardspl is still there after flashing

PelloG said:
i flashed it (spl 1.04; like it is written in the guide) but no success. Olipros hardspl is still there after flashing
Click to expand...
Click to collapse
you flashed this? (warning direct link)

no...i flashed spl 1.04 from mr. vanx' list over the hard spl...wrong?

PelloG said:
no...i flashed spl 1.04 from mr. vanx' list over the hard spl...wrong?
Click to expand...
Click to collapse
If it didnt work, somethings wrong.
Try that one, making sure you forced UNSAFE SSPL.

ok...the 2.03 works