Develop Bugs

Problem Installation Wm6

Hello
My Problem Is The Splash Wm6 Is Withe, I Cannot Start Wm6 Because It Does Not Appear To Me The Splash Wm6.
I installed WM5, the problem not is present.
Help Me
Thancks

Did you fallow the instruction carefully? Did you do hard Spl?
Now you flash back you original rom and do Hard Spl first http://server2.dimonvideo.ru/uploads/public/users/lvsw/Trinity/HardSPL/Hard-SPL.zip then do what ever you want.

Its the bug that occurs with Olipro's Hard-SPL in combination with images made with the tadzio toolkit. Olipro won't fix it because he blames tadzio.
However it works fine with DES's Hard-SPL, at least I never had complaints about my Roms with it.
So I recommend:
- enter bootloader
- flash any OS not made with tadzio
- install DES Hard-SPL
- reflash (without flashing Olipro's Hard-SPL)

Zak-
all i see in the trinity forums is Des' SSPL... not hard-spl.. am i missing something?

http://forum.xda-developers.com/showpost.php?p=1161055&postcount=4

ZakMcRofl said:
http://forum.xda-developers.com/showpost.php?p=1161055&postcount=4
Click to expand...
Click to collapse
Man, even Des doesn't recommend it

maybe i like living dangerously but i have flashed LVSW 2.0.0.1 & now Mun_rus 2.00SE using SSPL on a UK SPV M700.
worked flawlessly both times!

ZakMcRofl said:
http://forum.xda-developers.com/showpost.php?p=1161055&postcount=4
Click to expand...
Click to collapse
ah ok thanks.. found that thread but wasn't sure if that file was what you were talking about.. sounds like some real hard-spl drama going on around here

I installed HARD-SPL, flash the rom LVSW end my problem still it exists.
TO the END Of the INSTALLATION MY SCREEN IS BLOCKED WHITE END I DONT ENTER IN OS
HELP ME

B&B v4 after O2 WM6 upgrade READ FIRST!!!

If Anyone has applied the WM6 update from O2 to their Orbit, you may find that you need to downgrade back to WM5 before installing B&B v4 ROM. The reason is the USPL that is updated. After flashing O2 ROM the USPL is updated to 3.something. When running the USPL program the SPL number changes to 1.11.0000. This does not happen after O2 upgrade.
So far only way to remedy this is to flash back to WM5, re-flash USPL and then flash new ROM.

And where do i get the "old" WM5-O2-Rom for my Orbit?
Thanx!
Mic

micstar said:
And where do i get the "old" WM5-O2-Rom for my Orbit?
Thanx!
Mic
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866

Thanks CoolGadget - that was fast.
1 more question for a newbie like me:
-I own the german version of the O2-Orbit - does this make a difference?
Cheers
Mic

Before everyone who's done the update to WM6 goes down this road, try this.
1. Make sure you're using a Windows XP PC!!
2. hard reset.
3. perform basic setup as normal.
4. soft reset.
5. apply uspl.
6. flash with B&B 4.
I had the offical WM6 ROM on mine, and actually just soft reset it, applies USPL and flashed and didn't have a single problem.

What is USPL?
OK this is a really stupid question, but what is a uspl?

Thanks for this tip,
it worked perfectly for me.
I unlocked my Orbit with C3v2Unlock from Imei Check (and of course my .unl key), prior to USPL Flash, but I'm not sure if it was necessary as USPL makes your phone SuperCID temporarily.
Anyway thanks again,
B&B 4.0 rocks !!

Cinamon said:
OK this is a really stupid question, but what is a uspl?
Click to expand...
Click to collapse
OK this is a really stupid question, have you tried the search button?

MaskedMarauder said:
OK this is a really stupid question, have you tried the search button?
Click to expand...
Click to collapse
...or simply click the only sticky post in this forum...

1. To all members I would always recommend running USPL first before downgrading rom - if the spl no's change then it worked and you can flash another rom. (it worked on my orbit after flashing official o2 wm6 rom)
2. After supercid unlock from imei check - your device is permanently cid unlocked no matter what rom you flash - there is no need to run cid unlock again or uspl.
Shand if poss can you update your post as members will end up confused - if you doubt the info its here on the forum - read posts from faria and others.

I had o2 WM6 and I just flashed with uspl and then B&B 4.0, didn't need to downgrade back to wm5.

Cinamon said:
OK this is a really stupid question, but what is a uspl?
Click to expand...
Click to collapse
OK this is a really stupid question, but what is a Artemis ? I only have a P3300.
Haha dont get me wrong, it just made me laugh and i had a rough day.

usingautumn said:
I had o2 WM6 and I just flashed with uspl and then B&B 4.0, didn't need to downgrade back to wm5.
Click to expand...
Click to collapse
Just did a friends orbit, had no problems either.

I just did my XDA Orbit. Downgraded to the official 02 WM5 (as I'd installed the new 02 WM6 official version), ran the USPL and installed the new version. It's so sweet!
Also, I did mine using Vista - no probs. Just make sure you have old active sync drivers installed for Bootloader mode. Ask if you're unsure.
Actually while I'm here, I can see I can overclock the CPU. What's the maxium I can take it to, (safely)?

HTC WWE Rom Upgrade

Hi Guys,
I have an MDA Vario II on T-Mobile UK. I Understand (I think) the reasons that you guys use HardSPL and Super CID etc but I have a simple query.
I have downloaded the HTC WWE Rom from the links here on this site. Do I have to bother with the normal runaround (HardSPL / Super CID) as this is an "official" update for the hermes ?
I do not intend to use my Hermes with A.n.other provider just T-Mobile. Will I have to do anything special ?
Before you flame me (Somebody will be tempted I am sure) I have read and re-read the forums here, but they all seem to point that the steps like Hardspl and SuperCID are necessary only if applying cooked roms !?!

yes no matter what just cid unlock and get hard spl v7 so you cant brick your hermes
dont be a N00B,
jdac21

jdac21 said:
yes no matter what just cid unlock and get hard spl v7 so you cant brick your hermes
dont be a N00B,
jdac21
Click to expand...
Click to collapse
Thanks for the prompt response, I am still confused though. I assumed I didn't have to worry about bricking if I was using the official HTC Rom?
Also I read that HardSPL7 would meant the HTC Rom didn't work and I would have to go with a cooked ROM, in which case I might as well just go Schapps or something. I would like to just go with the basic WM6 ROM HTC provide and tweak it with software. No offence to any of the chefs here of course, but I don't think I need anything fancy.

nuthing will work aprt from the stocck t-mobile rom so you hav to cid and hard spl i got vario 2 aswell and it will not brick if you do these things
than you can flash any rom

Ok Cool. Thanks for the advice. I will let you know how it turns out.

gimme your msn and ill go through it with you

download this rom its great http://rapidshare.com/files/53224152/supa_dupa_beta_2.zip

jdac21 said:
gimme your msn and ill go through it with you
Click to expand...
Click to collapse
Thanks for the offer and I would take you up on it, but ... the only MSN I have currently ..... Is on my Phone !!!
Thanks for the link above, which ROM is that ?

duttythroy beta rom
get any rom for herme after you cid and simunlock then get hard spl v7

jdac21 said:
duttythroy beta rom
get any rom for herme after you cid and simunlock then get hard spl v7
Click to expand...
Click to collapse
You don't need to do a CID unlock if you apply Hard SPL V7. Hard SPL will make your device think that is SuperCID. You need only SIM unlock if you're going to use other than T-Mobile network.
Cheers

p3600i rom

http://rapidshare.com/files/121817898/Trinitin_-p3600i-Working_Mary-wwe-wm6.1.rar.html
this is a repack of the Mary 3.7 WWE lite FOR THE P3600i as found elsewhere in this forum.
YOU NEED TO have the 3.2 hardspl from olipro installed and have the phone in bootloader mode in order for this to work.

thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??

amanx said:
thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??
Click to expand...
Click to collapse
3.2 is what i have - it worked for me.

thks ajajaj will try and posted. being download now

Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni

now my CHT9110 got P3600I WM6.1 mary..and work fine. thks ajajaj.
btw..what wrong with other cook WM6.1 for P3600i, why when i try to flash it get through the process but the phone get stuck on boot screen.
appreciated for your advise.

mrmoni said:
Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni
Click to expand...
Click to collapse
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.

what does repacking the ROM involve? can it be done manually for other cooked ROMs?

ssamth2003 said:
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.
Click to expand...
Click to collapse
Did it ! Works like a charm
Thank You !!!

i hv test for an afternoon
i use 3g network with 3HK
i find that the 3g signal is very week when compare with the original wm6 htc rom
is there any method to solve the problem??
thx

Thanks Worked!!!!
going to try the
P3600I WM6.1_5.2.19588(Diamond) WWE ROM support CHS,CHT,JP,KR,TH,ENG,RU,GR V03.13.YK rom next

Can you do a full guide include all the files and all the proccess? for someone that never done rom flash... and i can put any rom?

Please, how i do the flash... step by step... I didnt get it

USPL ?

Why there is no USPL for Diamond ... can any one tell me

mezolezo said:
Why there is no USPL for Diamond ... can any one tell me
Click to expand...
Click to collapse
Because Its Called HardSPL for the diamond
http://forum.xda-developers.com/showthread.php?t=416211
Read, Read and READ again before Flashing.

Dear garymeg
Thank you so much for your fast replay
any way finally i toke the risk to flash my Daimond with HSPL and i flashed it back to the stock SPL and it`s working fine now, but i am wondering whey there is no USPL as Trinty and Blackstone
thank you again

garymeg said:
Because Its Called HardSPL for the diamond
Click to expand...
Click to collapse
AFAIK, USPL and HardSPL is not the same thing so the question is valid.
Although I think the only answer to why there is no USPL for Diamond is that no-one has made any. At least yet and AFAIK.

Im interested to hear why USPL have not been written for diamond. Its was out a hiwle ago for the blackstone.

USPL follows the author who made it. He had a Trinity and now he's moved to the Blackstone. USPL option basically is scarce because I believe there is only 1 guy that knows how to do it.
Forgot he's name....

mezolezo said:
Dear garymeg
Thank you so much for your fast replay
any way finally i toke the risk to flash my Daimond with HSPL and i flashed it back to the stock SPL and it`s working fine now, but i am wondering whey there is no USPL as Trinty and Blackstone
thank you again
Click to expand...
Click to collapse
how did you falsh back to the original SPL on Diamond?