Develop Bugs

WARNING about downgrading from WM6 LVSW Edition (2007-03-20)

Hey all,
I am posting this as an independent thread to be sure it gets some visibility. If an admin judges it should be put into the main LVSW thread, then he is welcome to move it within the LVSW thread. However I'm pretty sure I stumbled onto something that can prevent a lot of pain for some people.
Here is the scenario which occurred to three different people:
- SuperCID device.
- LVSW full version is installed with no problem => SPL 1.09
- Downgrade to any Official ROM using the provided normal RUU. Flashing goes 100% fine, not a single problem
- But upon reboot, we have a brick: Corrupted CID, SPL 1.09, No GSM, and depending on the Official ROM flashed KITL or no KITL (if the former, recoverable through hours of work with Platform Builder, if the later, unrecoverable). Since the flashing went 100% fine, that's weird, to say the least.
This same identical scenario has generated three bricks thus far:
- myself, repaired after a sleepless night spent on Platform Builder (my gratitude goes to Allan's most excellent post)
- lebogus, complete brick, no KITL, unrecoverable
- otto26, KITL, recoverable with Platform Builder
IMHO, three cases like that is too much to be a coincidence, especially after a 100% problem-free flashing of an official ROM.
Therefore, to anyone wishing to downgrade from a full version of LVSW (with SPL 1.09), he should make sure that before downgrading, he replaces the 1.09 SPL with Olipro's Hard-SPL to be sure that even if this scenario repeats itself, he doesn't have to go through Platform Builder.
I hope this thread won't be judged to be abusive and misplaced, if so I apologize.
Anyway maybe this will help someone.
Cheers
Yannick

Cuivienor said:
Hey all,
I am posting this as an independent thread to be sure it gets some visibility. If an admin judges it should be put into the main LVSW thread, then he is welcome to move it within the LVSW thread. However I'm pretty sure I stumbled onto something that can prevent a lot of pain for some people.
Here is the scenario which occurred to three different people:
- SuperCID device.
- LVSW full version is installed with no problem => SPL 1.09
- Downgrade to any Official ROM using the provided normal RUU. Flashing goes 100% fine, not a single problem
- But upon reboot, we have a brick: Corrupted CID, SPL 1.09, No GSM, and depending on the Official ROM flashed KITL or no KITL (if the former, recoverable through hours of work with Platform Builder, if the later, unrecoverable). Since the flashing went 100% fine, that's weird, to say the least.
This same identical scenario has generated three bricks thus far:
- myself, repaired after a sleepless night spent on Platform Builder (my gratitude goes to Allan's most excellent post)
- lebogus, complete brick, no KITL, unrecoverable
- otto26, KITL, recoverable with Platform Builder
IMHO, three cases like that is too much to be a coincidence, especially after a 100% problem-free flashing of an official ROM.
Therefore, to anyone wishing to downgrade from a full version of LVSW (with SPL 1.09), he should make sure that before downgrading, he replaces the 1.09 SPL with Olipro's Hard-SPL to be sure that even if this scenario repeats itself, he doesn't have to go through Platform Builder.
I hope this thread won't be judged to be abusive and misplaced, if so I apologize.
Anyway maybe this will help someone.
Cheers
Yannick
Click to expand...
Click to collapse
I don't think this thread abusive, but can help noob users. Really the HardSPL must convert in "the standar" for upgrading to WM6 in cooking. If someone cook any WM6 ROM, HardSPL must be part of package...
So thanks for your advice.

Heres a quick guide to flashing HardSPL to help users on the way.

mrvanx said:
Heres a quick guide to flashing HardSPL to help users on the way.
Click to expand...
Click to collapse
Goooood work, man.....
Now lets the cookers to include HardSPL into his cooked ROMs to get the maximun protection against dead hermes...

jcespi2005 said:
Goooood work, man.....
Now lets the cookers to include HardSPL into his cooked ROMs to get the maximun protection against dead hermes...
Click to expand...
Click to collapse
Dears,
Black 1.2 now comes bumdled with Oli's 1.13.Oli Hard SPL for securiry measures and to avoid bad block problems.

jasjamming said:
Dears,
Black 1.2 now comes bumdled with Oli's 1.13.Oli Hard SPL for securiry measures and to avoid bad block problems.
Click to expand...
Click to collapse
This is the correct way.... thanks

I think you're talking out your bloody arse frankly.
I have no idea how you managed to **** up your radio, but that's what you've done, something definitely went tits up and I don't really think it's lwvs's fault unless he disassembled the radio and edited the bloody thing to deliberately corrupt a flash

jcespi2005 said:
I don't think this thread abusive, but can help noob users. Really the HardSPL must convert in "the standar" for upgrading to WM6 in cooking. If someone cook any WM6 ROM, HardSPL must be part of package...
So thanks for your advice.
Click to expand...
Click to collapse
Thanks for letting me know I was just pretty unsure of where to put my message and whether it deserved a full-fledged thread...
Anyway I'm glad this can be of help and I hope it won't disappear too quickly into the depth of this forum (not at least until LVSW includes Olipro's bootloader...)
Yannick

I'm going to post a rom of lvsw 3-20 that includes oli's 1.13 BL and the OS with extra ram ONLY. No radio, no IPL, no extrom. hang tight, I'm uploading now

Olipro said:
I think you're talking out your bloody arse frankly.
I have no idea how you managed to **** up your radio, but that's what you've done, something definitely went tits up and I don't really think it's lwvs's fault unless he disassembled the radio and edited the bloody thing to deliberately corrupt a flash
Click to expand...
Click to collapse
OK if so I'm sorry. It's just that three apparently successful flashings of official ROMs ending up in bricks look strange to me. Maybe it's theoretically impossible and it must mean that there was some external reason. But you have to admit that three times the same scenario within the last 2 days is an improbable coincidence.
I am not blaming lwvs by the way, his ROM is most excellent, I loved it, but needed to downgrade because of a problem I had with some of my software (WM6's fault, not lwvs's).
As said, maybe it's a completely external reason. Who knows? What I care about is that I noticed it happened following this scenario several times in a very short span. Make what you will out of it.
Just see it as a warning, and anyone is free to do as he or she wishes.
Cheers
Yannick

LegolasTheElf said:
I'm going to post a rom of lvsw 3-20 that includes oli's 1.13 BL and the OS with extra ram ONLY. No radio, no IPL, no extrom. hang tight, I'm uploading now
Click to expand...
Click to collapse
URL please for the wiki ?

LegolasTheElf said:
I'm going to post a rom of lvsw 3-20 that includes oli's 1.13 BL and the OS with extra ram ONLY. No radio, no IPL, no extrom. hang tight, I'm uploading now
Click to expand...
Click to collapse
Thanks for your work.. sure this help more than one...starting with me

I had exactly the same problem, going from lvsw to an older official wm5 rom.
All went fine, 100%, reboot and NO GSM.
Recovered with KITL.

@jpvdb Did you install OS only, or the full package?

Gotta ask, when downgrading to WM5 obviously this will flash a new SPL, Radio and OS to the device correct?? Because by the sounds of it people are using the full RUU package and not splitting into seperate nb files)
So firstly if it is 1.09 this WILL NOT be downgraded, and if the radio being flashed is of loader 0107 could this be the reason?
Since Most people now have a radio version with loader 0108 this might be the reason behind it??
If im GROSSLY incorrect please correct me right now (im after some of that olipro charm!!!! )

jpvdp said:
I had exactly the same problem, going from lvsw to an older official wm5 rom.
All went fine, 100%, reboot and NO GSM.
Recovered with KITL.
Click to expand...
Click to collapse
I've done the downgrade twice without any problem. I am now back to 3-20 version. In case it helps to identify the problem, I have used Hard-SPL every time and I have flashed the different components separately.
I stayed with radio 1.35.00.11 and I only flashed the different OSs (extracting them from original ROMs when needed). No problems at all.

New ROM download!
I have created a lvsw 3-20 that installs ONLY Oli's 1.13 BL and OS with Extra ROM Storage ONLY!
Get it from here:
http://rapidshare.com/files/22731195/lvsw3-20.with.oli1.13.and.os.with.extra.ram.only.rar
** Please note, if you already have Oli's 1.13, choose 1.11 and HARD. **
** Thanks goes to the_passenger for creating the extra-ram version of the OS! Works like a champ on my two devices

@mrvanx: correct, we are talking about full upgrades and downgrades. Your point is pretty interesting by the way, and it seems that mfabre's case goes in the way of this theory. But indeed you should wait for Olipro's expert opinion
@LegolasTheElf: talk about reactivity... You rule, man!

mrvanx said:
URL please for the wiki ?
Click to expand...
Click to collapse
Already done!

LegolasTheElf said:
...Rom: WM6! LVSW 3-20-07 WARNING!! Don't install LVSW radio! Use this instead! See this thread for more info!
....
....
....If you installed the entire rom that lvsw posted, it seems like the radio has been modified and it's causing issues. This update will prevent bricking of your phone when you go to change the radio.
However, if you only installed the OS and have NOT installed lvsw's radio, this is a useless upgrade unless you want the increased ROM storage.
Click to expand...
Click to collapse
I think it is a tad premature to announce that there is a problem with the LVWS ROM sir. It is more than likely that the problems experienced are due to people trying to reflash an old SPL, and a radio with loader 0107 (which CANNOT be downgraded).
I would recommend removing the line from your sig since we have only reports of THREE cases of this happening. We dont want to cause alarm to people who have been running this ROM without any problems.

IPL-1.00 upgrade available now from the latest official WM6 Dopod!

ausdim (Senior Member) has extract the new version IPL-1.00 included in the latest WM6 Dopod ROM.
I've just upgrade my IPL-050 to IPL-1.00. No problem. Works fine.

Why would you update the ipl?
I mean what's the benefit ?

Why not?
RacerII said:
Why would you update the ipl?
I mean what's the benefit ?
Click to expand...
Click to collapse
And why not?
Older version was 0.50 and newest is 1.00.
That's all.
After upgrade IPL version 1.00, my Trinity work always fine.
Filicloe.

I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.

"NO WAY to recover"
Shadowmite said:
I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.
Click to expand...
Click to collapse
I already flash 3 Trinity: mine and two others. No problem. The upgrade IPL procedure is very fast (about 2 secunds).
Thanks again a lot at the senior member ausdim which extract the latest IPL version.
Dopod has release a new IPL version, and I think there is a reason. Why did they upgrade IPL? Only for the fun? It's not serious.
Now, my Trinity get the latest and official IPL, SPL (by Olipro) and Radio ROM.
Filicloe.

Hi,it's already included in the rom FR 3.1 cooking by Faman.

Marcdu81 said:
Hi,it's already included in the rom FR 3.1 cooking by Faman.
Click to expand...
Click to collapse
Yes. But I'm not using the ROM FAMAN 3.1.
See my signature below.
And this upgrade can be useful for those who are already in IPL-0.50 and want to change only the IPL Version (instead of flashing a complete ROM with IPL-SPL-RADIO ROM).
Filicloe.

Ok,I just give this information for 3.1 user's,so they don't need to flash with it if they don't know their IPL version.

what is the difference in versions guys??
why are we updating?

Difference between IPL-0.50 and IPL-1.00?
mhbr12742 said:
what is the difference in versions guys??
why are we updating?
Click to expand...
Click to collapse
That's a very good question!
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
We can only be sure that's the newest version.
Filicloe.

filicloe said:
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
Click to expand...
Click to collapse
which is a good reason not to risk your device for no reason..

Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.

Silly question i know... But what is the IPL for? what does it do?

- IPL :
the IPL (Initial Program Loader) with for role of all copying the contents of ROM SPL in RAM.
- SPL:
Once charged in RAM, the SPL (Secondary Program Loader) commonly called bootloader,charge the Radio ROM and OS in memory and to start the sequence of boot.
For the IPL and the SPL it is very strongly not recommended to update these ROM: for a majority of pda there are several versions of the internal components, and the updates are not compatible between different material because the sequences of starting are different. Moreover once the IPL and SPL upgraded, a return behind is not possible!

Shadowmite said:
Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.
Click to expand...
Click to collapse
Dear Shadowmite
OK. Now I understand.
I will flash tomorrow morning the latest official HTC WM5 ROM (1.23.406.2) which restore the original IPL, SPL, RADIO, etc.
After that, I think my Trinity will not be yet SuperCID. No ?
So, are you agree with this procedure:
1- Remake my Trinity SuperCID with the Pof utility v1,
2- Flash SPL 1.30 Olipro
3- Flash Radio ROM 1.46.30.11
4- Update any WM6 ROM.
Please, tell me if this procedure is the best. (I'm sure that a lot of members of XDA-DEVELOPERS will be interested by your response)
Thanks by advance,
Filicloe.

[REF]Hard-SPL supported ROMs & requests

Here is a list of downloadable and flashable ROMs (providing you have Diamond Hard-SPL).
You may also post links to a ROM that you wish to have signed here.
Currently uploading a couple of ROMs as we speak, will be linked here within the next hour and a half (crap upload)
DIAM140 Users: Please note that stock ROMs are currently not fully compatible with your device and therefore are not recommended for flashing unless you backup your current ROM first.
DIAM300 Users: We need someone to test these ROMs, so any guinea pigs please test but first backup current ROM.
Everyone else: have fun!
CURRENT ROMS:
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08_0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_Europe_1.37.401.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_NOR_1.37.409.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_FRA_1.37.406.1_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
RUU_Diamond_HTC_GER_1.93.407.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
RUU_Diamond_HTC_ITA_1.93.408.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
RUU_Diamond_HTC_SPA_1.93.412.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
O2_DE_XDA_Diamond_1.37_RUU (REBUILT)
DIAM1.37.413.3SVE (REBUILT)
COOKED ROMS:
ALL BEPE ROMS ARE SIGNED AND ARE PART OF THE ELITE TEAM ROMs DIVISION, SEE INDIVIDUAL THREADS.
Elite 2.0
PDAVIET DIAMOND_1.37.08.01
tlr-diamond-1.08.06.20
tlr-diamond-2.08.07.01
DIAM.DAN.137.403.3-Cyphol
DiamProject_V1_5.2.19960_Radio_1.00.25.06_signed
Diamond_Surface_6.1.1.17_NLD_Blue_White
DIAM140 (EDGE Only Diamond):
indian_ship_rom
Also, a big thank you to Corian, our most prolific signing agent.

Moderation Request
Please keep this thread tidy, no 'great thanks' posts or etc..
Any questions regarding a particular ROM should be posted in the correct thread. All posts not relating to this thread will be deleted.
Please inform the moderation team of any such posts or invalid links via the alert button.

Flashing WWE ROM did not succeed !!!
I managed to flast HardSPL 1.30 OliNex.
I have originally a Dutch ROM.
Now I try to flash the following RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship WWE ROM but it does not go further dan 0 %.
What can be the reason?
I tried a few times but everytime the same result

I had the same problem, Its because the rom must be signed with the certificate same as used for hardspl, If you use this rom witch they signed with the same srt it will work,
http://forum.xda-developers.com/showthread.php?t=400411

benbekoster said:
I managed to flast HardSPL 1.30 OliNex.
I have originally a Dutch ROM.
Now I try to flash the following RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship WWE ROM but it does not go further dan 0 %.
What can be the reason?
I tried a few times but everytime the same result
Click to expand...
Click to collapse
Do you not bother to read or are you just stupid?
download one of the two linked in the FIRST POST of THIS THREAD.
you'll find that one of those two is the one you're trying to flash.
more will be posted as they're made public, but so far, we've signed the only OSs available for Diamond.

@ diamond section: thanks for closing http://forum.xda-developers.com/showthread.php?t=397566
Anyway, Ive got a multi-language Diamond, so I dont need to look spanish rom again thanks

Strange, I managed to install this ROM without Hard-SPL. I did try to install hard-spl, screen went black like it's supposed to, but then I didn't know what to do and did a soft reset.
Then I ran the Europe ROM update downloaded from first-post in this thread. It installed beautifully, I got congratulated, and my phone is a lot faster (thanks for that!)
My boot screen doesn't say Olinex, so apparently hardspl isn't installed.
How is this possible? And does it have any consequences for my phone?

Obviously you have already done hard-spl but you don't know that...
In boot screen it doesn't say Olinex anywhere, but you will see that if you put your device in bootloader mode.

If badflower is the one i think he is, then he doesn't have the Olinex bootloader screen!! He has the original bootloader.

Have sign requests for 1.37.707.1 and 1.37.405.1 been made yet?

Waiting for 1.37 signed ? when ????

Soon... it's up to Olipro and cmonex. Be patient.

Yzord said:
If badflower is the one i think he is, then he doesn't have the Olinex bootloader screen!! He has the original bootloader.
Click to expand...
Click to collapse
then i guess
1) he's a moron for not reading the instructions for hardspl installation
2) he just flashed an original, completely unmodified HTC rom

itzik-g said:
Waiting for 1.37 signed ? when ????
Click to expand...
Click to collapse
ask Olipro in a PM.

cmonex said:
ask Olipro in a PM.
Click to expand...
Click to collapse
Just out of interest, who of the "Elite Team" can sign ROMs?

This is what i mean....people are waiting a full day now for a signed rom. This aint working. Just put the developers SPL on your device.

hebrew
any hebrew rom

is there a way to go back to the original SPL?

zaki67 said:
is there a way to go back to the original SPL?
Click to expand...
Click to collapse
Yeah in a few days or so there will be a rollback SPL

stock SPLs - only for warranty reasons
here's the stock SPLs... 1.23, 1.34, 1.37, 1.93.
EDIT: I uploaded 1.35 later because people couldn't understand there was no real difference between 1.34 and 1.35. so it is now in the second attachment in this post.
new: also uploaded 1.93 now.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from this post (pick one of the attachments) in this thread.
2. also download the RUU-SSPL-withoutNBH.zip from the attachments in this post.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, put the NBH in the extracted RUU-SSPL-withoutNBH package.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.
that's it.

olinex 1.40 signed upgrade

hi guys
to save my sanity the orignal thread on this has become so long with so many serparate queries.
I am currently running signed olinex 1.30 but need to upgrade to signed 1.40 so i can upgrade the radio
please can someone post here the direct link to the olinex 1.40 signed file
and finally any ohter factors i should be aware of in this process
many thanks in advance
i will be keeping the ROM as current on RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship

help as per :
as per guide on signed upgrade on racerx site :
http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=2
this semms to link to older files.. if the duirect file in question her could be linked in this thread i would be very grateful

I have made signed radios available here:
http://htcroms.aplace4u.biz/signed/radio/
Will work fine with your signed 1.30 Hard-SPL

hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S

porkmince said:
hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S
Click to expand...
Click to collapse
I'm positive, i signed them myself, and have used them on my own Diamond

indeed you are correct sorry for questioning you
radio upgraded and ready to rock
thanks for the confirmation
a bit new to all this so thought always better to check with someone that knows
cheers

Sure, no worries.

Thank you very much Corian, very useful !!
Worked perfectly with my Olinex 1.30 signed Hard-SPL.
I think global perfomances (TF3D) have been improved.
Bye

hi, sorry for reviving an old thread but i gotta know, if i want to upgrade my 1.30 signed to 1.40 or .193 unsigned, should i just run the ruu or jump spl first? thanks!

Back to Original ROM

Hey guys.
Second time I have went with a cooked/modded ROM on a TouchDiamond.
The update process has been 100% sucessful each time.
But now I am trying to get back to the original Telstra ROM - Telstra_WWE_1.38.841.5 on the Asia HTC eClub website. This is also the original ROM on the unit when it shipped.
Using the guide located at:
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
I installed Hard-SPL 1.40 Olinex SIGNED – Once this was installed I was under the impression somehow it would allow me to go back to Original ROM if needed. As I though the Hard-SPL was a backup before messing with ROM.
I was then using Elite 3.0 – But need to get the unit back to the Original ROM before it is sent away for work use.
I am trying to run the Telstra ROM RUU Installer but receive an ERROR 262 - This occurs when the unit still show 0%.
Any ideas on what I can do.
Also – thank you, as your help and time is much appreciated
Brett

Hi, install the unsigned hard spl developer edition then install that stock rom.

hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?

You'll either need to get the ROM signed for HardSPL, or use the unsigned HardSPL.

jakontil said:
hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?
Click to expand...
Click to collapse
I believe that with the term "unsigned hardspl developer edition" we reffer to the unsigned olinex 1.40 hardspl.
It is the first attachment in this thread http://forum.xda-developers.com/showthread.php?t=400950
That is the recommended one.
But I think 1.93 unsigned SPL would work too, but first try the recommended one.

First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)

Laubscherc said:
First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)
Click to expand...
Click to collapse
Use Unsigned SPL ., Flash the ROM
Yes for warranty return

Do you have a copy of the Telstra 1.38 SPL? I didnt think the Original reloads back the SPL?

This isn't actually for a warrenty return. I have had the phone for 2 weeks and been reading quite a bit about it on here - and thought i'd give the Elite v3.0 a go -
Love the speed imporvement of it - The unit just responds so much quicker. But i have then realisied i need the telstra MyPlace apps - My Account, Sensis, Foxtel etc..
So am deciding to go back to the original ROM.
Anyways - So i can re run the Hard SPL installer with an unsigned HardSPL installer and it will over right the exisiting one?
Then this will allow me to install the original ROM from the HTC Site? Is this correct.
In the above guide (as i mentioned the the first post) they reccomend:
"Hard-SPL 1.40 Olinex Developer Edition-unsigned" as the HardSPL Unsigned tool to use.
From there i have the choice of 3 HardSPL installers:
http://forum.xda-developers.com/showthread.php?t=400950
Unsigned-Hard-SPL-Diamond-OliNex.zip (1.92 MB)
HardSPL_Olinex137_Unsigned.zip (137.4 KB)
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (136.6 KB)
Which one do you reccomend?
Once again - thanks for all your support on this issue. I very much appriciate it and your time.
Brett

RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
is what I am using on the telstra diamond.
The others left me with some flickering in TF3D
I installed this one over the Signed Hard SPL without any issues.

Hey guys.
Installed the Unsigned HardSPL and then was aloud to install the Original Telstra Rom v1.38...... hate it - but o well. I'll live.
Thanks once again for your help and time
Brett