Develop Bugs

Can I go back?

I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.

I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.

euth said:
I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.
Click to expand...
Click to collapse
Yes. You can go back to WM5 from WM6. I have done it before with no problems. Your answer is once again yes!
I will not flame you but look harder.

wildbilll said:
I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.
Click to expand...
Click to collapse
I am feeling kind tonight!
Look here:- http://www.mrvanx.org/cms/

You two rookies need to stop by:
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
Hope the hint helps

Oh dear
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
And the gurus have used plain english too! wow!

...but just to let You know..
once You go black (2.5 ), You will never go back...

hi there
first of all, I am no expert in the ROM related knowledge, but i did go back to WM5 from WM6 recently. The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Besides, i don't mind to share my experience for downgrading to WM5, the following is my up and down sequence.
1. upgrade from Dopod WM5 rom to WM6 cooked rom
2. upgrade to SPL 1.40
3. upgrade radio to 1.38.00.11
4. upgrade radio to 1.40.30.00
5. upgrade to SPL 2.10
6. downgrade SPL from 2.10 to 1.40
7. downgrade from WM5 Rom (It is some sort of HTC Standard WM5 Rom that my friend gave me, and my radio has gone back to 1.38.00.10 as the ROM comes with it.
8. upgrade to SPL 2.10
9. upgrade to Radio 1.40.30.00
Also, you may check out mrvanx's guide for downgrading to WM5 here.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26

bronx said:
...but just to let You know..
once You go black (2.5 ), You will never go back...
Click to expand...
Click to collapse
actually... i'm on black 2.5 and thinking of going back... too many apps are wiggin out on wm6

I actually just did it. I was running the latest version of HardSPL, flashed to the new ATT ROM, and then created a updater to flash the SPL to the ATT spl.
Wasn't hard, and only took a few minutes. So, as of right now, my phone is running the new ATT ROM, and if I need to warranty it, I'm all set.

in the wiki it mentions..
If your vendor has released you original rom as a shipped upgrade, you just need to flash it.
If your vendor has not released any ROM upgrade yet, you cannot fall back to original ROM easily. You'll have to reconstruct the ROM out of a dumped ROM.
Click to expand...
Click to collapse
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.

crabwalker said:
The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Click to expand...
Click to collapse
if you only want to read chinese, but not input, there is an alternative to it. look for a cab which is named 'sunglobe.ttf register patch'.

Maybe the easiest way
First thing I would want to do is to Flash the unit to what is known as a "Hard SPL". For some reason it makes all the other flash work go a lot more smoothly. You can get instructions and software for that at:
http://www.mrvanx.org/cms/index.php...ask=view&id=40&Itemid=26&limit=1&limitstart=2
Once that is done, and it should take about 5-10 minutes depending upon the speed of your computer and USB connection, you can load whatever OS rom you desire.
You can get a carrier agreeable rom from the Cingular/ATT site:
http://www.htcamerica.net/support/8525/software-downloads.html
Or, and this should work, just link directly to the rob by clicking:
http://www.htcamerica.net/support/d...R_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe
This should leave you at the latest and greatest of the WM5 packages from Cingular/ATT, and all should be well. And . . . if it hozes . . . which it should not, you should have no warrantee issues since you were trying to flash the upgrade that THEY were providing you. :-D
Laters,

d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
ROMs from Dopod HK or Singapore are very old ones. The SPL is 1.04. You may not be able to flash backward if you are with HardSPL v7. Also if your radio ROM is newer than 1.27, you may face problem when you flash the original (as it is packed with an old radio rom).
(Please correct me if I am wrong.)
To play safe, follow mrvanx' guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26

d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40

crabwalker said:
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40
Click to expand...
Click to collapse
So in other words: do exactly what my guide says to do?

Why
mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Why would anyone want to do that? A tested process that works time and time again?
And if you don't mind the compliment, all of your guides rock!

mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Yes, just forgot to mentioned, I ripped the Bootloader and Radio all based on your (mrvanx) guide. It is great, the info provided is easy to follow, very clear and precise. Thanks.

O2 XDA Diamond official ROM (German)

Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html

perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31

Thx!
Yeah, thanks man!

you are my hero (4 2day)!!!

Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!

Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider

http://www.megaupload.com/?d=D5HWC22H

I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...

Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...

thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert

thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.

sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot

thx for the guide

is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian

Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony

whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?

can anyone sign this for me to use?

anyone ????

First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far

Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?

[UPG]HardSPLs 1.23, 1.24 and 1.34

Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL

perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?

Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.

Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device

Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not

will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing

Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.

jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)

Thanks jocky bro..!
It works just fine

i installed 1.24... it works although i can't see anything special.

@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.

SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.

works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!

Great release Buddy still using your first beta

HardSPL v1.34 added to first post.

jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times

I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.

Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here

jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.

so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?

tutorial/description/info/guide

Hi everyone!
Here's the deal! I'm no noob to flashing, cooking and HardSPL as I'm positive there are plenty of users who are swimming in the same pool.
Moving from another device's forum (Trinity) to the Diamond forum is quite a shock. So many posts, so many threads.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
For instance:
I'm running an old version of Radio and Official Diamond ROM (Stock), 1.00.25.03 Radio and 1.37.479.3 WWE ROM.
Bootloader version is:
Code:
DIAM100 64M
SPL-1.37.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I'd like to first upgrade to another Official ROM, like RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1.
No info on following:
- changing an original to another original ROM: is there need for HardSPL?
- changing a supposed EU original to an Asia original ROM: is there need for HardSPL?
- if there is need for it when upgradin ROM, which one to choose based on bootloader info?
- if there is need for it when upgradin Radio, which one to choose based on bootloader info?
etc.
I can live with my new device with stock ROM, I can tweak it, no problem.
But it is my strong belief that a detailed tutorial/description/info/guide thread could get a nice sticky.
Something that would make new users like:
"Oh, I just bought a Diamond, I read this sticky, compared my bootloader info with the ones stated in the thread, checked my ROM and Radio, checked my new ROM and Radio which I want to flash, so I need this/I don't need any HardSPL and it worked"
Yes, call it spoon-feeding, but while looking at the Forums and reading and searching, there's so much clutter some can't even find the Search button!
My two cents!

I totally agree !!! We are needing that "tutorial for dummies"

Im new to the Diamond forum too, had a tytn for ages though.
I found everything i needed to know on the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond

Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help

geistteufel said:
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
Click to expand...
Click to collapse
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?

tnyynt said:
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
Click to expand...
Click to collapse
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps

andy2111 said:
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
Click to expand...
Click to collapse
I know that, remember, I'm not a n00b.
First, I have no updates in my registered Diamond e-Club account.
Second, this is what I am talking about: You said:
You don't need HardSPL to flash an official ROM.
Click to expand...
Click to collapse
Other peoples opinion:
omaga said:
You need hardspl on every one, and all are offcial roms as they were downloaded
only the rom you can download from your own HTC e-club site dont need hardspl.
Click to expand...
Click to collapse
Contradictory information?
Now since I don't have any updates in my own e-Club, there's the HardSPL option with other (even Official) ROMs.
Question is: which one? (1.23, 1.24, 1.34, Developer edition, Hard-SPL-Diamond-OliNex, HardSPL_OliNex138_Signed or RUU_Signed_1_93OliNex_HSPL_UnsignedEdition).
This is crazy!

Maybe that's the difference then - perhaps ROM downloads via the e-club are treated differently, although I can't think how.
Seems that Cmonex and Olipro are the SPL experts here (I'm sure you've already seen this http://forum.xda-developers.com/showthread.php?t=400402) so maybe they're the best ones to help.
If it helps I updated to HardSLP 1.4 and ran quite happily on my stock ROM before upgrading to Dutty's ROM. I guess it's down to how adventurous/risky you want to be.
Good luck.

1. look at the next posts, i blew it on this answer..
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
here, an answer from THE expert:
http://forum.xda-developers.com/showpost.php?p=2484533&postcount=143
2. if i convinced you to hardspl then go to the unsigned version:
http://forum.xda-developers.com/showthread.php?t=400950.
i am using it from the beginning (2 month at least) and i flashed my diamond 4 times without any problem at all.
3.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
Click to expand...
Click to collapse
already there, in almost each ROM thread.
i think all cooks start their thread with the warning (hardspl first!) and a link to the recommended hardspl.
bepe is "all signed" so he never mention which hardspl.
others, for example:
dutty's choice of hardspl: http://forum.xda-developers.com/showthread.php?t=408621
[WM 6.1] NEW SWIFTBL WWE DIAMOND ROM V5.0 - CE OS 5.2.20273 (BUILD 20273 AKU 1.3.3)
http://forum.xda-developers.com/showpost.php?p=2312249&postcount=2 or http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1first
DIAMOND PROJECT ROM Release V3.2 [WWE/GER/ITA/FRE/RUS/ESN]
http://forum.xda-developers.com/showthread.php?t=408621
i wonder what happened to you.... learn from post #3!! you are a ROM cook...you are the "uber" user! we should ask you questions

I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.

vrstu said:
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
Click to expand...
Click to collapse
i think you are right. never thought at this scenario.....
usually i don't buy my pda branded. no plan, no 3 years, free as a bird!
thanks for bringing it to my attention.

yeah, hard-spl to allow you to flash ROMs from other regions..
technically you shouldn't need it to 'protect' your device since its an official ROM upgrade, but then again you're trying to flash an upgrade that's not from your region so not too sure how that affects your warranty.. i would stick with hard-spl no matter what.
Although you may experience better results with certain ROMs using a certain SPL (this hasn't been clearly shown on the diamond to my knowledge) seems like the SPL is more tied to your hardware (why certain people get screen flicker and fuzzy fonts after flashing.. wrong SPL). so it stands to reason if your hardware doesn't change, you *shouldn't* have to change your SPL just cause you're flashing a new ROM

KukurikU said:
1. you don't need hardspl when you want to flash an official ROM.
if you should need one then HTC should release it with the ROM. no such thing!
HTC release official ROM "like it is" for all ppl even for the ones that never heard of hardspl. simple logic.
if you buy it branded look at the next two posts!
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
Click to expand...
Click to collapse
I have experince now with 3 HTC devices: 1. i had Trinity with wwe rom when i bought it-> try to put it to my language (Finnish ROM) didnt work, used hardspl-> it worked
2. Polaris with wwe 6.0 rom, tried to update to the latest wm6.0 rom which was a rom from Singapore, no succes-> put hardspl in device->it worked
3. In my Diamond i put hardspl right away(after 2 hour use), so that one i didnt test at all, based on my previous experience I didnt even try to flash the official 1.93 rom witout hardspl
So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience

[/QUOTE]So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience[/QUOTE]
From my experience from the diamond, you have to flash hardspl onto your handset before you can use 'other region' roms even when it is 'official'.
I have a HK WWE handset and tried to flash my rom with the first upgrade rom from SEA, and it wouldnt flash. it would say my handset is not from the correct region.
i flashed a hard spl afterwards and it worked.

So from pak1234 experience we can make some conclusion? its the same experience I got with Polaris and Trinity

Noob Agony
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.

bluntyeyedfool said:
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
Click to expand...
Click to collapse
congrats on yr first successfull step (english language on yr swiss locked diamond)! perseverance and good reading skills pay back.
welcome to our forum!
from yr post i can understand that you started as an intelligent user/member of this forum (as opposed to noob) by using this forum accordingly with it's rules.
there are stupid questions. if one of the next is called by somebody "arrogant response" then he'll have to adjust or just grow elephant skin (i can name a few that already did):
1. "search, this was already posted". (most used)
2. "read the manual." (almost an insult)
3. "read wiki." (friendly, useful advice)
4. "most of the polls are useless." (no comment necessary)
5. "comparisons between any other ppc and diamond does not belong here, this a diamond only forum." (sadly not enough enforced)
a noob is not somebody with a low count of posts. a noob is somebody with a noobish attitude (total disregard of the forum's rules and it's members, wanting everything now, ready, chewed and put in his mouth).
respect the forum and it's members and you'll get respect and help beyond yr wildest dreams.
yr PS only confirm all from the above.
i prefer not to comment yr horses-payback threat

noob here
Hello all, noob here, just got my diamond via vodafone NL.
The device is sim locked contrary to what the agreement with was.
The current rom running on it makes this device incredibly slow, my brother has an p3300 which works way faster than my diamond (but does not look so nice).
This made me start looking for a solution. I've been reading this site for three full days and I'm still very confused, everything and it's contrary is written here, how is one supposed to draw a conclusion?
With that said I would like to see a well written tutorial in plain english and that does not assume the reader is a techie.
It should explain:
- How to backup the original ROM and hardSPL
- How to flash a new rom and avoid issues with screen flickering and so on
- How to restore the original ROM and hardSPL in case the device needs to be send back for repair
- Clarify what to do with radio roms
- How to unlock a device to be used with any sim card (ok this already exists, i've seen the sticky)
Thanks

One more question to be added
- Why would you need a CID and security unlocker?
I thought it was just another name for sim card lock but apparently not.

tnyynt said:
I have no updates in my registered Diamond e-Club account
Click to expand...
Click to collapse
You should go to Support section of their site, that is where they post ROM updates apparently. e-Club has only ringtones.

Back to Original ROM

Hey guys.
Second time I have went with a cooked/modded ROM on a TouchDiamond.
The update process has been 100% sucessful each time.
But now I am trying to get back to the original Telstra ROM - Telstra_WWE_1.38.841.5 on the Asia HTC eClub website. This is also the original ROM on the unit when it shipped.
Using the guide located at:
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
I installed Hard-SPL 1.40 Olinex SIGNED – Once this was installed I was under the impression somehow it would allow me to go back to Original ROM if needed. As I though the Hard-SPL was a backup before messing with ROM.
I was then using Elite 3.0 – But need to get the unit back to the Original ROM before it is sent away for work use.
I am trying to run the Telstra ROM RUU Installer but receive an ERROR 262 - This occurs when the unit still show 0%.
Any ideas on what I can do.
Also – thank you, as your help and time is much appreciated
Brett

Hi, install the unsigned hard spl developer edition then install that stock rom.

hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?

You'll either need to get the ROM signed for HardSPL, or use the unsigned HardSPL.

jakontil said:
hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?
Click to expand...
Click to collapse
I believe that with the term "unsigned hardspl developer edition" we reffer to the unsigned olinex 1.40 hardspl.
It is the first attachment in this thread http://forum.xda-developers.com/showthread.php?t=400950
That is the recommended one.
But I think 1.93 unsigned SPL would work too, but first try the recommended one.

First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)

Laubscherc said:
First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)
Click to expand...
Click to collapse
Use Unsigned SPL ., Flash the ROM
Yes for warranty return

Do you have a copy of the Telstra 1.38 SPL? I didnt think the Original reloads back the SPL?

This isn't actually for a warrenty return. I have had the phone for 2 weeks and been reading quite a bit about it on here - and thought i'd give the Elite v3.0 a go -
Love the speed imporvement of it - The unit just responds so much quicker. But i have then realisied i need the telstra MyPlace apps - My Account, Sensis, Foxtel etc..
So am deciding to go back to the original ROM.
Anyways - So i can re run the Hard SPL installer with an unsigned HardSPL installer and it will over right the exisiting one?
Then this will allow me to install the original ROM from the HTC Site? Is this correct.
In the above guide (as i mentioned the the first post) they reccomend:
"Hard-SPL 1.40 Olinex Developer Edition-unsigned" as the HardSPL Unsigned tool to use.
From there i have the choice of 3 HardSPL installers:
http://forum.xda-developers.com/showthread.php?t=400950
Unsigned-Hard-SPL-Diamond-OliNex.zip (1.92 MB)
HardSPL_Olinex137_Unsigned.zip (137.4 KB)
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (136.6 KB)
Which one do you reccomend?
Once again - thanks for all your support on this issue. I very much appriciate it and your time.
Brett

RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
is what I am using on the telstra diamond.
The others left me with some flickering in TF3D
I installed this one over the Signed Hard SPL without any issues.

Hey guys.
Installed the Unsigned HardSPL and then was aloud to install the Original Telstra Rom v1.38...... hate it - but o well. I'll live.
Thanks once again for your help and time
Brett