Develop Bugs

[UPG]HardSPLs 1.23, 1.24 and 1.34

Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL

perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?

Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.

Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device

Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not

will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing

Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.

jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)

Thanks jocky bro..!
It works just fine

i installed 1.24... it works although i can't see anything special.

@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.

SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.

works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!

Great release Buddy still using your first beta

HardSPL v1.34 added to first post.

jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times

I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.

Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here

jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.

so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?

olinex 1.40 signed upgrade

hi guys
to save my sanity the orignal thread on this has become so long with so many serparate queries.
I am currently running signed olinex 1.30 but need to upgrade to signed 1.40 so i can upgrade the radio
please can someone post here the direct link to the olinex 1.40 signed file
and finally any ohter factors i should be aware of in this process
many thanks in advance
i will be keeping the ROM as current on RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship

help as per :
as per guide on signed upgrade on racerx site :
http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=2
this semms to link to older files.. if the duirect file in question her could be linked in this thread i would be very grateful

I have made signed radios available here:
http://htcroms.aplace4u.biz/signed/radio/
Will work fine with your signed 1.30 Hard-SPL

hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S

porkmince said:
hi
thanks
are you sure though as in the guide it says
Do not proceed to flash your Radio without Hard-SPL on your device! You can follow the guide here for more info. Currently, there are no signed Radio ROMs so you must have unsigned Hard-SPL to flash one (at your own risk!)
mine is the signed 1.30 olinex
:S
Click to expand...
Click to collapse
I'm positive, i signed them myself, and have used them on my own Diamond

indeed you are correct sorry for questioning you
radio upgraded and ready to rock
thanks for the confirmation
a bit new to all this so thought always better to check with someone that knows
cheers

Sure, no worries.

Thank you very much Corian, very useful !!
Worked perfectly with my Olinex 1.30 signed Hard-SPL.
I think global perfomances (TF3D) have been improved.
Bye

hi, sorry for reviving an old thread but i gotta know, if i want to upgrade my 1.30 signed to 1.40 or .193 unsigned, should i just run the ruu or jump spl first? thanks!

Help with ROM update please.

Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke

y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky

OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!

This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950

harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)

he is asking for unsigned one also (i nv see wrong @ his post)

read again.. he already has 1.40 olinex (which is unsigned)

Back to Original ROM

Hey guys.
Second time I have went with a cooked/modded ROM on a TouchDiamond.
The update process has been 100% sucessful each time.
But now I am trying to get back to the original Telstra ROM - Telstra_WWE_1.38.841.5 on the Asia HTC eClub website. This is also the original ROM on the unit when it shipped.
Using the guide located at:
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
I installed Hard-SPL 1.40 Olinex SIGNED – Once this was installed I was under the impression somehow it would allow me to go back to Original ROM if needed. As I though the Hard-SPL was a backup before messing with ROM.
I was then using Elite 3.0 – But need to get the unit back to the Original ROM before it is sent away for work use.
I am trying to run the Telstra ROM RUU Installer but receive an ERROR 262 - This occurs when the unit still show 0%.
Any ideas on what I can do.
Also – thank you, as your help and time is much appreciated
Brett

Hi, install the unsigned hard spl developer edition then install that stock rom.

hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?

You'll either need to get the ROM signed for HardSPL, or use the unsigned HardSPL.

jakontil said:
hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?
Click to expand...
Click to collapse
I believe that with the term "unsigned hardspl developer edition" we reffer to the unsigned olinex 1.40 hardspl.
It is the first attachment in this thread http://forum.xda-developers.com/showthread.php?t=400950
That is the recommended one.
But I think 1.93 unsigned SPL would work too, but first try the recommended one.

First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)

Laubscherc said:
First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)
Click to expand...
Click to collapse
Use Unsigned SPL ., Flash the ROM
Yes for warranty return

Do you have a copy of the Telstra 1.38 SPL? I didnt think the Original reloads back the SPL?

This isn't actually for a warrenty return. I have had the phone for 2 weeks and been reading quite a bit about it on here - and thought i'd give the Elite v3.0 a go -
Love the speed imporvement of it - The unit just responds so much quicker. But i have then realisied i need the telstra MyPlace apps - My Account, Sensis, Foxtel etc..
So am deciding to go back to the original ROM.
Anyways - So i can re run the Hard SPL installer with an unsigned HardSPL installer and it will over right the exisiting one?
Then this will allow me to install the original ROM from the HTC Site? Is this correct.
In the above guide (as i mentioned the the first post) they reccomend:
"Hard-SPL 1.40 Olinex Developer Edition-unsigned" as the HardSPL Unsigned tool to use.
From there i have the choice of 3 HardSPL installers:
http://forum.xda-developers.com/showthread.php?t=400950
Unsigned-Hard-SPL-Diamond-OliNex.zip (1.92 MB)
HardSPL_Olinex137_Unsigned.zip (137.4 KB)
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (136.6 KB)
Which one do you reccomend?
Once again - thanks for all your support on this issue. I very much appriciate it and your time.
Brett

RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
is what I am using on the telstra diamond.
The others left me with some flickering in TF3D
I installed this one over the Signed Hard SPL without any issues.

Hey guys.
Installed the Unsigned HardSPL and then was aloud to install the Original Telstra Rom v1.38...... hate it - but o well. I'll live.
Thanks once again for your help and time
Brett

Question

Excuse me what is the difference between Unsigned Hard-SPL and signed Hard-SPL???Thanks for your help!!!!

With the unsigned you can flash everything you find here (and more... but I wouldnt recommend that ). With the signed you can only flash files that have been approved by the olinex team.

nickschot said:
With the unsigned you can flash everything you find here (and more... but I wouldnt recommend that ). With the signed you can only flash files that have been approved by the olinex team.
Click to expand...
Click to collapse
Why you wouldnt recommend that???what is the latest signed hard-SPL Version???

The latest is olinex 1.93 I think. I'm using 1.40.