How to unlock Car PC using Windows CE 5.0 - Upgrading, Modifying and Unlocking

Hi
I have the following Car PC A2270P from Roadrover ( http://www.roadrover.cn/E/productshow.asp?id=49&mnid=19046 ).
Tech specs :
- CPU 400MHZ (manufacturer unknown)
- 128 MB DDR RAM
- 128 MB NAND Flash
- Windows CE 5.0 ( as written in the user manual )
It has a USB port (that reads only flash USB)
It has a SD slot
In the shipped SD 1 GB card, a GPS Navigation application Route66 was included "Navigate7.exe". It is launched by pressing "NAVI" button
Once installed in my car, I found that Windows mobile was "locked" .
Only *.txt and audio and video files can be browsed and executed.
I can not install any additional application on the SD card.
In the SD card I tried the following :
- added dll included in "packdllxania.zip"
- added GSFinder.exe (file explorer), renamed it "Navigate7.exe" instead of the Route66 application.
- Pressed the "NAVI" button hoping that GSFinder will be launched instead of the GPS application. But I got an error message saying that the GPS application could not start
Do you have any idea how to :
- backup the installed Windows and applications
- unlock the installed Windows in order to have a "real" Car PC on which I can install my programs
Thanks for your help

try this file rename autorun.exe to Navigate7.exe make sure the .dll file is in the same folder as autorun.exe it works like a charm 4 me.

unlock car PC
Guys if you have a USB port hook up a keyboard.
Press crtl alt del
Task manager will come up
Kill Mgr app - wait a few seconds "End Now" will apear click end now on the touch screen window will close and you are in Windows ce.

carpc help
Hola , veo que controlais bastante mas que yo con estos aparatos ,asi que te hago una consulta por si alguien me puede ayudar, algo que te agradeceria mucho.
El caso es que compre un car pc para el toyota land cruiser ......y manipulando erroneamente borré aparentemente el sistema operativo y no arranca el sistema operativo , se ve todo azul ,solo funciona la camara con la marcha atrás, y cuando quitas la marcha atras puedes poner los discos de pelis y audio.....Supongo que la solucion es reinstalar todo el sistema operativo , pero no sé como hacerlo .Adjunto un enlace de un video que he subido a youtube donde se ve lo que hace....bueno lo que no hace jejejee....
Pues lo dicho , si alguien me pudiera ayudar lo agradeceria mucho.
Un saludo y gracias por anticipado.
http://www.youtube.com/watch?v=ONpoL...e=channel_page

Have any of that worked for you?
There is another way which is to make a file on the SD card named SHELL.SIG
Put the card in and then press the Factory Restart button. It should load Win CE .
But the problem that I am not sure if the DVD CD player and Radio will still work without the factory applications.
Anyone have an idea?

TomTom Device ID work around
Brianbri6
How did you get around a DEVICE ID requirement for the CE 5 Car DVD Player?
I am trying to get any version of TomTom onto a similar device.
Any advice would be welcome, even working TT version numbers would also be a great help.
Thanks
Johnno
brianbri6 said:
try this file rename autorun.exe to Navigate7.exe make sure the .dll file is in the same folder as autorun.exe it works like a charm 4 me.
Click to expand...
Click to collapse

Related

Install 6315 widcomm stak without problem

Make backup.
Remove BTTools (if you have them installed) Install the 1,58 (bluetoothgps.cab) Rename the Windows files wbtapiCE.dll, btrez.dll, BTChooserLib.dll and BTTrayCE.exe changing them the extension, for example, BAK. Install widcoom phone edition upgrade.cab Copy the files HFPControlPanel.dll and HFPUI.exe to windows directory. Finally install BTTools 10.12.
________________________________________________________
Hacer copia de seguridad
Desinstalar las BTTools (si las tienes instaladas) Instalar la 1.58 (bluetoothgps.cab) Renombrar los ficheros de windows wbtapiCE.dll, btrez.dll, BTChooserLib.dll y BTTrayCE.exe cambiandoles la extensión a, por ejemplo, bak. Instalar el widcoom phone edition upgrade.cab Despues copiamos los ficheros HFPControlPanel.dll y HFPUI.exe al directorio windows. Finalmente instalamos las BTTools 10.12.
So, what benefits do we got from doing this? Do we get additional profiles like the handsfree profile and do they work.
You obtain the general benefits of the widcomm BT, the difference is that, of this form, the BT system is quite stable. The profile handsfree I have not been able to prove it, tomorrow I will receive the parrot3000 and I will prove it.
But have you checked the Headset profile, can I use my BT Headset?
Sorry, I have not BT headset
You can make backup, try it and tell us
The advantage of this method is the stability of BT system, but I have not try all the possibilities.
One person said me that activesync don't work.
I need make more tests.
I have just tested, the headset does not work
Thanks
Christian
what version are those drivers??
Now is working activesync, file transfer, BT GPS (tomtomnavigator) and internet.
Rename and copy this files in windows.
In this moment I dont know about headset and handsfree
mi amigo esto es una vieja versión
------------------------------------------
my friend this is an old version the new one is 1.4.1.60
gracias
=====
sorry for my bad Spanish
Can anyone test this idea which can make BT headsets work with widcomm stack?
After digging into Dell Axim's registry I've found that WAVEDEV device driver is Widcomm's BT device driver. So can anyone edit the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] key and make there "Dll"="btceif.dll". Then reboot and test the headset with widcomm BT stack. I would be interested to know the result.
mamaich said:
Can anyone test this idea which can make BT headsets work with widcomm stack?
After digging into Dell Axim's registry I've found that WAVEDEV device driver is Widcomm's BT device driver. So can anyone edit the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] key and make there "Dll"="btceif.dll". Then reboot and test the headset with widcomm BT stack. I would be interested to know the result.
Click to expand...
Click to collapse
This registry entry is already present
PapaDocta said:
mi amigo esto es una vieja versión
------------------------------------------
my friend this is an old version the new one is 1.4.1.60
gracias
=====
sorry for my bad Spanish
Click to expand...
Click to collapse
It is a mixture of drivers from 1.4.1.58 1.4.1.59 (PPC) and from 1.0.0.1400 (Phone edition) I believe that the key is to combine drivers of the different versions to obtain that everything works and the system will be stable.
thanks for the info HDJ80, i have installed the latest and all working great no problem at all. but not sure about the headset..
Parrot ck3000 has not arrived to shop today. They have said to me that it will arrive at the beginning of the next week. I will already say as it works.
Query
It all works fine - thank you - except when I switch on or reset I get the Bluetooth cannot be initialised message. Is there any way of getting rid of this as it is a bit of a pain.
Thanks, John
Query
It all works fine - thank you - except when I switch on or reset I get the Bluetooth cannot be initialised message. Is there any way of getting rid of this as it is a bit of a pain.
Thanks, John
I understand that you install BTTools over the new BT stack, not? Then, if BTTools is enough for me (one headshet, one handsfree carkit, two activesync connections, ...) and is working fine, is better don't touch nothing ...
---------------
Entiendo que has instalado BTTools sobre el nuevo soft de wildcomm ... Si las BTTools están funcionando OK (1 auricular, el manos libres del coche y dos conexiones de Activesync), es mejor no tocar nada, verdad?
Hi,
I think so; if you are not sure and I were on you I did not upgrade if you do not need it. I tried to install these files and it caused a hard reset on my device, it could be possible that I did something wrong renaming the files.
I do not have BT Tools but widcomm stack 1.58 and my GPS and file transfers work like a charm, I do not find any reason IMHO to upgrade at all if the only advantage is the stability. Me and you already have it.
Saludos.
--------------------------------------------------------------------------------
Pues eso, que creo que no merece la pena, según comenta HDJ80 lo único que consigue es más estabilidad y nuestro sistema ya la tiene.
In the last installation I have not including the BTTools. The advantage of widcomm stack is the exploration capacity and use of the services of other devices and also to make a network BT. If you are not going it to use is not advisable its installation. When I speak of stability I do not talk about the BTTools, stack of widcomm often gives errors but with that mixture of drivers the system works like a clock, it does not give errors and even the BT is relit automaticamente after off/on.
-----------------------------------------------------------------------------------
En la última instalación ya no he incluido las BTTools. La ventaja del widcomm stack es la capacidad de exploración y uso de los servicios de otros dispositivos y también hacer una red BT. Si no lo vas a usar no es aconsejable su instalación. Cuando hablo de estabilidad no me refiero a las BTTools, el stack de widcomm da errores muchas veces pero con esa mezcla de drivers el sistema funciona como un reloj, no da errores e incluso el BT se reenciende automaticamente después de apagar y encender.

Why can nobody get a rom or app to get audio to Mono BT Headset???

Why can nobody answer the question to get sound directed to MONO bluetooth headset? I see many people cooking roms, making apps, testing touch flow but nobody with a real answer for trinity with sound to Mono headset. Lets face it 95% of us are walking down the road with a Mono headset. I would like to here sound from the Media player and the GPS the most. Please dont tell me to search the forums. I have looked everywhere and tried hundreds of bluetooth apps in many different ways. Most of us are using one of the cooked roms from here(great work BTW) and there using MS BT stack. I would like to here from someone that has it working or can create an app. I will even donate to the cause.
have you read this post:
http://forum.xda-developers.com/showthread.php?t=278778
I hav'nt tried it, but it seems to work in some cases
/BeeBo
look at Bluetoothaudio here : http://www.trianglepowers.com/
I used this soft with my old QTEK8300, and it worked perfectly.
But currently, it doesn't work on my trinity + Faman 3.4.
Maybe it will work on your device ?
please let me know if it works for you, cause I really would like to have the GPS sounds directly on my samsung WEP200.
There is a simple MortScript which does this. I use it on my M700 and it works a treat.
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
b1cnrt73 said:
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
Click to expand...
Click to collapse
I use my helmet BT headset (mono device) to hear music, phone and gps from my Trini, while riding my bike. You can bet it works!
I explain everything in my scooter forum. Sorry but it´s in spanish and I have no time for translation
Fundamentalmente se trata de instalar un programa como el BTAudioOn.exe, que te direcciona todo el sonido hacia el "manos libres".
El programa BTAudioOn.exe te lo puedes bajar de aquí http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Los ficheros son ejecutables directos. No requieren instalación en la PDA. Los copias en la carpeta "Mis Documentos" o "Archivos de programa" (o la que quieras) y los ejecutas desde el explorador de windows, o desde un acceso directo (si usas algún programa que te permita tener iconos de acceso directo).
En realidad verás que son tres ejecutables:
1. BTAudioOn.exe para dirigir el sonido al Midland
2. BTAudioOff.exe para dejar de dirigir el sonido al Midland
3. BTAudioToggle.exe: es un interruptor que ejecuta si estáparado o para BTAudioOn si está en ejecución.
Te basta con meter en tu pda el 1 y 2 o sólo el 3 (no pasa nada si metes los tres!)
Para que funcione debes tener encendidos (y emparejados) la PDA y el Midland. Y como no, seleccionado el Midland en la PDA. Es decir el proceso normal cuando utilizamos el Midland como manos libres. Después ejecutas el BTAudioOn.exe y ya está!
En HTC P3600 hay que tocar le registro:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
Además, cuando uso el BTAudioOn.exe, después tengo que apretar el botón azul del Midland (el que hace de voice command) un par de veces y ya se calla la PDA y se oye por los cascos.
Además hay otro problemilla menor :
Si entra un llamada de teléfono o realizas una llamada el programa BTAudioOn.exe se corta y hay que volverlo a ejecutar. Y si estás en moto con guantes y tal es un rollito. La solución es un programa que se encarga de re-ejecutar el BTAudioOn, automáticamente.
- Descárgate e instala en tu PDA Mortscript. Lo tienes aquí http://www.sto-helit.de/modules/edito/content.php?id=38.
- Descárgate y guarda en tu PDA donde quieras este fichero sonido-bt.mscr desde http://mihd.net/ygu85k.
Este es el fichero que debes ejecutar ahora y no el BTAudioON.exe. El programa has de ejecutarlo en las mismas condiciones, es decir, ambos bluettoth encendidos y sincronizados. Muy importante: en este caso el BTaudioOn.exe debe estar en la carpeta "My Documents" de tu PDA. Queda residente encargándose de reconectar los dispositivos despues de una llamada.
Para que deje de estar en ejecución basta con apagar alguno de los bluetooth.
Hi. I've tried this (translated courtesy of Altavista's Babel Fish Translation Services), but to no avail. I can hear some sizzling noise on my bluetooth headset, but when I start an MP3 file, it still plays the audio through the phone's speaker. I have the P3600i. Can someone help please? Thanks!
Also no sound
Hi,
have you ever solved this problem?
I fear you haven't I read since days, my TRIN has the skipping problem, but neither unskipping tricks nor redirection works. What a shame.
IsiT_de...
i have never found a good solution. I am using a newer rom eligant 2.11 and it seems to work ok
Donation grant: 6.1 GER + A2DP on Trinity
Hi,
well, your advantage is that you are using an english ROM. I prefer a german one, and here, the choice is limited.
I just went back to WM5, what a shame, since 6.1 performed really well, except this A2DP problem.
I also can't understand why this problem exists - isn't it possible to extract the BT stack from the perfectly working WM5 and integrate it into the WM6? Probably not. If I am wrong: I am definitely going to donate more than a buck if anyone can get 6.1 + A2DP working on a german Trinity, w/o making the machine slow or something worse. And I bet there are other who would join me!
Anyone who feels like trying?
IsiT_de...

complete ftouchflocube package

i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
does it work in any device ??
Still in beta....
http://forum.xda-developers.com/showthread.php?t=343583
herg62123 said:
i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
Click to expand...
Click to collapse
Seems to be a Spanish language version, hence the "ES" on the end of the file name.
PS. Changing the shortcut names is as easy as editing the registry.
i have an at&t 8525 and the tilt it works perfectly on both.
Hi I Know Spanish no French but I Know what to change to English because the French and Spanish are romance language that comes from Latin I found in the Cab file I opened with Winrar and I found in the XML file the French thinks like Fotos and not Photos and Musica and not Music But I need someone to Compress the files back in to a Cab file I can send the XML with the correct Language In English
If someone can compress back into cab file contact me at
[email protected]
Or if any one Know of some Really good File like this cab file that works relly well and that it is plane and simple and the English that we all love.
Lowenski said:
the French thinks like Fotos and not Photos and Musica and not Music
Click to expand...
Click to collapse
I guess you meant the Spanish...
What is the difference between this and SCLPF located here?:
http://forum.xda-developers.com/showthread.php?t=336234
What is better/faster/less bug? Anybody tried both?
Thanks!
I'm Using this on my Hermes And It's Running Flawlessly. I installed the Cab, I Changed Parameters in The Cube Config UnFortunately u can't change Display to English. You Actually Need to get that Picture The app is using with the word in English. I also Have HTC album As well as Music From my Storage card Directed to As Default for Music And photos. Only a Matter of time b4 People Start Cooking this into there Roms and b4 someone Chops it Up to make an all Enlgish Version. Nice Find and time will make this Great for the hermes.
I just used the restore defaults tab in "about" and everything is in english
Works flawlessly and doesnt slow down the device either.
i have shap's 3.54b in italian.i installed the cab,restart my tytn and i get an error at star. something about no digital sign...
shawnthecableguy said:
I just used the restore defaults tab in "about" and everything is in english
Works flawlessly and doesnt slow down the device either.
Click to expand...
Click to collapse
Yea ? But if you Do this the Media Hub is Still not in English
no funciona
No funciona en mi tytn... lo instalé en distintos carpetas, en la memoria del dispositivo, en la tarjeta de memoria... pero nada.
Cuando reinicio el sistema sale un cartel que dice que no se puede encontrar el fichero touchflocube.exe o que no se ha firmado...no se...
i installed it on my cell and works great , little bit slow in the cube with the contacts nothing we can support
flashh said:
No funciona en mi tytn... lo instalé en distintos carpetas, en la memoria del dispositivo, en la tarjeta de memoria... pero nada.
Cuando reinicio el sistema sale un cartel que dice que no se puede encontrar el fichero touchflocube.exe o que no se ha firmado...no se...
Click to expand...
Click to collapse
hi flashh did you make the instalation via activesync ? or how do you install it
hola flashh lo instalaste via activesync ? o como lo instalaste
Mine is in english, you talking about the music, pictures, video side of the cube??
arreguin said:
hi flashh did you make the instalation via activesync ? or how do you install it
hola flashh lo instalaste via activesync ? o como lo instalaste
Click to expand...
Click to collapse
Hola Arreguin, extraje el .cab y lo pase a la pda estándo sincronizado con el pc, después estándo en la pda lo instalé. (probé instalarlo en la memoria del dispositivo, en diferentes partes "my document, raiz, windows, etc" y también hice lo mismo en la tarjeta de memoria, pero me sale error al reiniciarse la pda después de la instalación... no se que pasa... gracias.
Sorry, but not write in english. thanks again and sorry.
Thanks its work great on my 838pro.....
shawnthecableguy said:
Mine is in english, you talking about the music, pictures, video side of the cube??
Click to expand...
Click to collapse
Yes that's Exactly What I"m talking about...
A bit slow when show Contac's tab, no? There is a delay of about 2 seconds in my X01HT. Do anybody have the same problem?

IPAQ 514 dead after flash of WM 6.1

Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
ipaq blogsoft is respensable
I have the same probleme
Nobody helps ?
Nobody helps ?
ça fait deux jours que j'essais de resourdre le probleme sans aucune solution
je suis entrain d'avoir quelques idées dans ce lien
http://www.resco.net/forums/ShowPost.aspx?PostID=2804
sorry if the
text shown below is unreadable or with errors (thanks translate.google.com).
Malheureusement, ce n'est pour les fonctions PDA et les instructions de démarrage, mais 514 est un peu différente de la situation
back into my poor english:
In other words i don't know if this is applicable for IPAQ 514 and in post i've seen that device is alive (shows USB/Serial) but in this situation it seems no any interaction. I've tested to enter bootloader but with any of key combinations to enter bootloader mode , what i have found on the internet the operation was NOT successful.
no news at the moment
I find this text but i dont undrestand You just need the installed program DLLs.. what thos it meen
text :
RESOLUTION:
Use a Windows XP computer with active sync (4.5). Connection is not active, but this is no problem. You just need the installed program DLLs..
Connect the 514 to USB, it will show "connected to USB"
Start the upgrade...
If there is an error message "not found", stop the program and restart it.
Bios upgrade will start and after 2 minutes, the phone is running again...
Link : http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1197769
You need only dynamicaly linked libraries (DLL files) , you don't need full active sync , but this is not relevant to this.
In this case (from text that you find) is 514 alive and computer detects it, but in case what we need to solve (now minimaly for my ipaq) is problem in no communication. when i connect my 514 to my PC it does not found new hardware or do sounds like when you connect already known hardware. in other words PC does not recognize something on other end of the cable. And next problem is: author writes that ipaq or pc shows connected to usb but nothing seems to be applicable to this case.
I have the same probleme I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from the Gost ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
I searching for resolution if I will have news I let it in forum
see you again
Solution!! - it worked for me
this has worked for me:
i assume that you have usb cable plugged into the pc
for english wm6 search hp SP38077
it must match your SKU ID (P/N) otherwise it says you have wrong version.my skuid is:FA908AA#ABB -> SP38077
i have windows vista installed and it works
1) take out the battery
2) remove USB cable if connected
3) insert battery
4) push and hold the silver center of the 4way key and press red phone key (switch on)
or see http://h20000.www2.hp.com/bizsuppor...=3375716&prodTypeId=215348&objectID=c01087938
this will make hard reset
5) computer now recognizes HP USB Sync
if no then remove battery
remove cable
insert battery again
then hold volume down (bottom part of the silver key on left side of phone)
and insert USB
now it will enter bootloader mode and if previosly not installed then now installs hp usb sync
now start HP Rom update utility with your preffered language (en or fr i dont know)
and it will connect to the phone and upgrade a firmware and voila phone is ALIVE !
Please post if you were successfull.
Alwase the same probleme
I make make hard reset with the first solution i see only "No image exists !!" message also whith the second solution and if i conect my device my pc not recognizes my device I'm very angry
there is a diference between HP USB Sync and Microsoft active sync
I dont understand what do you want to tell with HP USB Sync
I have Windows XP
Thank you for your help
Is that i must install Windows Vista
I wait or your help plase
Help me plase
IF I make make hard reset with the first solution i see only "No image exists !!" message also whith the second ; Are you see the message after you make hard reset ??
When I make hard reset with holding volume up and pressing red phone key (switch on) I have a black screen
Have you an idea palse
Think you
Nobody helps ?
i dont know if in XP shows HP USB Sync - but HP USB Sync is mode in which the device is visible for Rom Update Utility (almost in Vista) I will test it in VM
It so terrible with this communication it is so longly. Do you have an IM account (ICQ Skype MSN ?) If Yes then send me your number or nick in Private message and when i will be back to home (in 1 hour ) then we can test it online)
Think you my friend this is my ICQ Number or Email [email protected]
check your mailbox
Nobody helps ?
greeg said:
Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
Click to expand...
Click to collapse
The same thing happened to me. Can anybody help out with this?
No image exists solucion
Buenas a todos, acabo de resolver el problema ayer:
1-lo primero que hay que hacer es quitar la bateria al movil y dejarlo asi unas cuantas horas o hasta el dia siguiente (a mi me funciono dejandolo hasta el dia siguiente)
2-en tu pc con windows xp, WINDOWS VISTA NO, repito WINDOWS VISTA NOO!!! instalar primero el microsoft active sync que viene en el cd de la caja
3-descargar e instalar el rom update para tu idioma de la misma pagina de hp
4-colocar nuevamente la bateria (despues de varias horas)
5-pulsar el boton de bajar volumen lateral y el de izquierda de control central y sin soltarlos conectar el usb al pc
6-ya no deberia aparecer no image exists, mas bien te aparece el mensaje de bootloader y que esta conectado via usb
7-iniciamos el room update que hemos descargado
8-luego de unos minutos el movil vuelve a estar operativo
aclaraciones:
-esto no funciona en windows vista y probablemente si pruebas actualizar ahora el wm6.1 si funcione, siempre y cuando la actualizacion la hagas desde un pc con windows xp (aun no lo he probado)
-tienes que dejar el movil sin la bateria varias horas ya que al principio lo probe sin hacerlo y no me funciono, solo funciono luego de dejarlo sin la bateria por varias horas
-para poder iniciar el room update que se descarga de la pagina de hp tienes que tener instalado antes el microsoft active sync que viene en la caja con el movil de lo contrario te dira que no encuentra un dll
-un dia lleve el movil a un servicio tecnico y me dijeron que no se podia reparar, me gustaria enseñarles tambien como se hace
suerte a todos

Redmi Note 8 Pro Hard Brick & Black Screen

Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor
I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point
need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?

Categories

Resources