Install 6315 widcomm stak without problem - Upgrading, Modifying and Unlocking

Make backup.
Remove BTTools (if you have them installed) Install the 1,58 (bluetoothgps.cab) Rename the Windows files wbtapiCE.dll, btrez.dll, BTChooserLib.dll and BTTrayCE.exe changing them the extension, for example, BAK. Install widcoom phone edition upgrade.cab Copy the files HFPControlPanel.dll and HFPUI.exe to windows directory. Finally install BTTools 10.12.
________________________________________________________
Hacer copia de seguridad
Desinstalar las BTTools (si las tienes instaladas) Instalar la 1.58 (bluetoothgps.cab) Renombrar los ficheros de windows wbtapiCE.dll, btrez.dll, BTChooserLib.dll y BTTrayCE.exe cambiandoles la extensión a, por ejemplo, bak. Instalar el widcoom phone edition upgrade.cab Despues copiamos los ficheros HFPControlPanel.dll y HFPUI.exe al directorio windows. Finalmente instalamos las BTTools 10.12.

So, what benefits do we got from doing this? Do we get additional profiles like the handsfree profile and do they work.

You obtain the general benefits of the widcomm BT, the difference is that, of this form, the BT system is quite stable. The profile handsfree I have not been able to prove it, tomorrow I will receive the parrot3000 and I will prove it.

But have you checked the Headset profile, can I use my BT Headset?

Sorry, I have not BT headset
You can make backup, try it and tell us
The advantage of this method is the stability of BT system, but I have not try all the possibilities.

One person said me that activesync don't work.
I need make more tests.

I have just tested, the headset does not work
Thanks
Christian

what version are those drivers??

Now is working activesync, file transfer, BT GPS (tomtomnavigator) and internet.
Rename and copy this files in windows.
In this moment I dont know about headset and handsfree

mi amigo esto es una vieja versión
------------------------------------------
my friend this is an old version the new one is 1.4.1.60
gracias
=====
sorry for my bad Spanish

Can anyone test this idea which can make BT headsets work with widcomm stack?
After digging into Dell Axim's registry I've found that WAVEDEV device driver is Widcomm's BT device driver. So can anyone edit the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] key and make there "Dll"="btceif.dll". Then reboot and test the headset with widcomm BT stack. I would be interested to know the result.

mamaich said:
Can anyone test this idea which can make BT headsets work with widcomm stack?
After digging into Dell Axim's registry I've found that WAVEDEV device driver is Widcomm's BT device driver. So can anyone edit the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] key and make there "Dll"="btceif.dll". Then reboot and test the headset with widcomm BT stack. I would be interested to know the result.
Click to expand...
Click to collapse
This registry entry is already present

PapaDocta said:
mi amigo esto es una vieja versión
------------------------------------------
my friend this is an old version the new one is 1.4.1.60
gracias
=====
sorry for my bad Spanish
Click to expand...
Click to collapse
It is a mixture of drivers from 1.4.1.58 1.4.1.59 (PPC) and from 1.0.0.1400 (Phone edition) I believe that the key is to combine drivers of the different versions to obtain that everything works and the system will be stable.

thanks for the info HDJ80, i have installed the latest and all working great no problem at all. but not sure about the headset..

Parrot ck3000 has not arrived to shop today. They have said to me that it will arrive at the beginning of the next week. I will already say as it works.

Query
It all works fine - thank you - except when I switch on or reset I get the Bluetooth cannot be initialised message. Is there any way of getting rid of this as it is a bit of a pain.
Thanks, John

Query
It all works fine - thank you - except when I switch on or reset I get the Bluetooth cannot be initialised message. Is there any way of getting rid of this as it is a bit of a pain.
Thanks, John

I understand that you install BTTools over the new BT stack, not? Then, if BTTools is enough for me (one headshet, one handsfree carkit, two activesync connections, ...) and is working fine, is better don't touch nothing ...
---------------
Entiendo que has instalado BTTools sobre el nuevo soft de wildcomm ... Si las BTTools están funcionando OK (1 auricular, el manos libres del coche y dos conexiones de Activesync), es mejor no tocar nada, verdad?

Hi,
I think so; if you are not sure and I were on you I did not upgrade if you do not need it. I tried to install these files and it caused a hard reset on my device, it could be possible that I did something wrong renaming the files.
I do not have BT Tools but widcomm stack 1.58 and my GPS and file transfers work like a charm, I do not find any reason IMHO to upgrade at all if the only advantage is the stability. Me and you already have it.
Saludos.
--------------------------------------------------------------------------------
Pues eso, que creo que no merece la pena, según comenta HDJ80 lo único que consigue es más estabilidad y nuestro sistema ya la tiene.

In the last installation I have not including the BTTools. The advantage of widcomm stack is the exploration capacity and use of the services of other devices and also to make a network BT. If you are not going it to use is not advisable its installation. When I speak of stability I do not talk about the BTTools, stack of widcomm often gives errors but with that mixture of drivers the system works like a clock, it does not give errors and even the BT is relit automaticamente after off/on.
-----------------------------------------------------------------------------------
En la última instalación ya no he incluido las BTTools. La ventaja del widcomm stack es la capacidad de exploración y uso de los servicios de otros dispositivos y también hacer una red BT. Si no lo vas a usar no es aconsejable su instalación. Cuando hablo de estabilidad no me refiero a las BTTools, el stack de widcomm da errores muchas veces pero con esa mezcla de drivers el sistema funciona como un reloj, no da errores e incluso el BT se reenciende automaticamente después de apagar y encender.

Related

[11/08/2007] Spanish WM6 v3.2

WM6 Spanish Edition​
Version 3.2
Thanks to bepe, Tadzio, Jasjamming.
Thanks to LVSW and mUn for their always great work.
Thanks to Ausdim for his help and fix.
Thanks to Olipro and Des for their SPL
!!!!!!!!!!!!!OS + HardSPL!!!!!!!!!!!!!!!
DOWNLOAD v3.2​from Rapidshare​
BT Headset VOICE DIAL FIX for all versions
Homeplug_ES_Signed_FIXED
Radio 1.41.00.11 GPS​
!!!!!BEFORE UPGRADE, PLEASE REMOVE SD CARD!!!!!
3.2:
Based on latest official dopod .18 dated 24/07/2007
Fixed: office copy\paste , photo gps, ..., go to vibrate
Removed: battery status, htc voice recorder.
Translated: office 6.1 now in SP.
Changed: 5-Tab home, new skin for wmp, comm manager 10-buttons, MS terminal server by .NET Vnc Viewer.
Added: new 3G dialer made by Duronmarcel, audio booster, windows update, ...
3.01:
Fixed: MMS, Softkey Applet, Bouton 2, GPRS/3G disconnection link, Hard-reset apps + reg fix.
Added: mUn and JUVS HTC Home.
Updated: Taskmanager by v1.5, Pim backup by v2.5, internal apps.
Removed: Sub-splashscreen.
Improved: GPRS/3G connection, IE, ...
3.00:
"missing Bouton 2" fix.cab
"MMS, Softkey Applet and disconnection for 3G/GPRS" fix.cab
Based on dopod official rom
Fixed: certificates, timbres, battery drain, ...
Added: office mobile 6.1, MMS 4.0 R2, comm manager and home from kaiser, BS, Pim backup, ...
Updated: internal & external apps (streaming, AM, ...)
+ many others things...
IF YOU APPRECIATE MY WORK YOU CAN MAKE A DONATION...​
Thanks from an Spanish user of wm6 !!!
this rom work perfectly, thanks Faman.
Aaaagggggggg!!!
thanks Faman
Backup?
Installed this ROM… can be recovered backup made in ROM lvsw 2.0.1.1?
GREETINGS
JUER.... Thank you very much
downloading to test it, but sure that is right
Yours Canary /EPP/
sanchezj said:
Installed this ROM… can be recovered backup made in ROM lvsw 2.0.1.1?
GREETINGS
Click to expand...
Click to collapse
complete backup are not recommended, but you can try...
if you've got problems after, make a Hardreset.
Thanks is very good Rom
You know if this ROM work with BBC.
I need BBC for Work....
sorry, I see the lvsw 2.0.1.1 is not compatible for BBC
Thanks for all and your good work.
Muchas gracias
FAMAN said:
complete backup are not recommended, but you can try...
if you've got problems after, make a Hardreset.
Click to expand...
Click to collapse
Thanks for your good work...
nonexxx said:
Thanks is very good Rom
You know if this ROM work with BBC.
I need BBC for Work....
sorry, I see the lvsw 2.0.1.1 is not compatible for BBC
Thanks for all and your good work.
Click to expand...
Click to collapse
Can you please give me the cab and explain how you do ?
I have asked this quesion but no answers at all. I want to use it on my company and I don't know how to manage it. May I have to change my ROM ?
When i'm tring to to create a BB accoutant, it tells me that my PIN and/or IMEI is incorrect.
Gracais por tu ayuda, estoy hasta .... con este BBC
lmr2003 said:
Can you please give me the cab and explain how you do ?
I have asked this quesion but no answers at all. I want to use it on my company and I don't know how to manage it. May I have to change my ROM ?
When i'm tring to to create a BB accoutant, it tells me that my PIN and/or IMEI is incorrect.
Gracais por tu ayuda, estoy hasta .... con este BBC
Click to expand...
Click to collapse
Hello,The BBC in Trinity Only work with this ROM ROM 1.23.707.4_TEST DOPOD
If you wont work with BBC you need install this ROM....
Lo siento es la unica solución, o instalas esa ROM o no te funcionara el BB en la Trinity.( es una lastima, pero de momento no hay mucha demanda de este servicio en la Trinity, tendremos que esperar, o hacernos Maestros, jejeje, eso si esta dificil........)
Saludos
nonexxx said:
Hello,The BBC in Trinity Only work with this ROM ROM 1.23.707.4_TEST DOPOD
If you wont work with BBC you need install this ROM....
Lo siento es la unica solución, o instalas esa ROM o no te funcionara el BB en la Trinity.( es una lastima, pero de momento no hay mucha demanda de este servicio en la Trinity, tendremos que esperar, o hacernos Maestros, jejeje, eso si esta dificil........)
Saludos
Click to expand...
Click to collapse
Que es esto de la BB?
Thanks for the ROM, thay I have just installed.
I am trying to say to Outlook to save the attached documents in the Card, but when I mark this option in the configuration of Outlook, it says that there is no Card un-blocked.
The card is in and I can surf in it with File explorer, so the Triny see the Card.
Any sugestion?
Thanks again
thanks!!!
chachi!
nonexxx said:
Hello,The BBC in Trinity Only work with this ROM ROM 1.23.707.4_TEST DOPOD
If you wont work with BBC you need install this ROM....
Lo siento es la unica solución, o instalas esa ROM o no te funcionara el BB en la Trinity.( es una lastima, pero de momento no hay mucha demanda de este servicio en la Trinity, tendremos que esperar, o hacernos Maestros, jejeje, eso si esta dificil........)
Saludos
Click to expand...
Click to collapse
Thanks for your quick reply. May I kindly ask you to tell me if the ROM Mentionned (ROM 1.23.707.4_TEST DOPOD) has the GPS enable and where I can find it ? Thanks in advance
The BBC is the BlackBerry Connect tool. It works like Push Mail but it takes less datas to run so it is faster and less expensive.
--------------
Gracias por tu respuesta, si me permites me puedes decir si esa ROM, la ROM 1.23.707.4_TEST DOPOD lleva GPS activo y donde la puedo encontrar ? Muchas gracias por tu ayuda
La BBC es la BlackBerry Connect, o sea Push Mail pero necesita menos datos para recibir emails, es entonces mas barato y mas rapido
lmr2003 said:
Thanks for your quick reply. May I kindly ask you to tell me if the ROM Mentionned (ROM 1.23.707.4_TEST DOPOD) has the GPS enable and where I can find it ? Thanks in advance
The BBC is the BlackBerry Connect tool. It works like Push Mail but it takes less datas to run so it is faster and less expensive.
--------------
Gracias por tu respuesta, si me permites me puedes decir si esa ROM, la ROM 1.23.707.4_TEST DOPOD lleva GPS activo y donde la puedo encontrar ? Muchas gracias por tu ayuda
La BBC es la BlackBerry Connect, o sea Push Mail pero necesita menos datos para recibir emails, es entonces mas barato y mas rapido
Click to expand...
Click to collapse
Yes have GPS and all work very good, the videocall good, the GPS good, the BT very good with my parrot car, I'm happy with this ROM, but I liked more the WM6.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Si tiene GPS activo y va de lujo, a pesar que yo luego puse la radio nueva, el resto va muy bien, funciona todo.
Saludos
Thanks
Thank you for this rom.
For the moment all work ok.
Iram
nonexxx said:
Yes have GPS and all work very good, the videocall good, the GPS good, the BT very good with my parrot car, I'm happy with this ROM, but I liked more the WM6.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Si tiene GPS activo y va de lujo, a pesar que yo luego puse la radio nueva, el resto va muy bien, funciona todo.
Saludos
Click to expand...
Click to collapse
Gracias voy a intentarlo.
Con el WM6 es mejor pero es que lleva no se cuantos problemas. Por mi parte, tengo la ultima en frances. El bluetooth y la bateria es una tortura cada dia.... El resto es verdad que va bien, rapido y muy bien de presentacion y todo.
wow ....thanks for this ROM ...
great work ...

Why can nobody get a rom or app to get audio to Mono BT Headset???

Why can nobody answer the question to get sound directed to MONO bluetooth headset? I see many people cooking roms, making apps, testing touch flow but nobody with a real answer for trinity with sound to Mono headset. Lets face it 95% of us are walking down the road with a Mono headset. I would like to here sound from the Media player and the GPS the most. Please dont tell me to search the forums. I have looked everywhere and tried hundreds of bluetooth apps in many different ways. Most of us are using one of the cooked roms from here(great work BTW) and there using MS BT stack. I would like to here from someone that has it working or can create an app. I will even donate to the cause.
have you read this post:
http://forum.xda-developers.com/showthread.php?t=278778
I hav'nt tried it, but it seems to work in some cases
/BeeBo
look at Bluetoothaudio here : http://www.trianglepowers.com/
I used this soft with my old QTEK8300, and it worked perfectly.
But currently, it doesn't work on my trinity + Faman 3.4.
Maybe it will work on your device ?
please let me know if it works for you, cause I really would like to have the GPS sounds directly on my samsung WEP200.
There is a simple MortScript which does this. I use it on my M700 and it works a treat.
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
b1cnrt73 said:
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
Click to expand...
Click to collapse
I use my helmet BT headset (mono device) to hear music, phone and gps from my Trini, while riding my bike. You can bet it works!
I explain everything in my scooter forum. Sorry but it´s in spanish and I have no time for translation
Fundamentalmente se trata de instalar un programa como el BTAudioOn.exe, que te direcciona todo el sonido hacia el "manos libres".
El programa BTAudioOn.exe te lo puedes bajar de aquí http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Los ficheros son ejecutables directos. No requieren instalación en la PDA. Los copias en la carpeta "Mis Documentos" o "Archivos de programa" (o la que quieras) y los ejecutas desde el explorador de windows, o desde un acceso directo (si usas algún programa que te permita tener iconos de acceso directo).
En realidad verás que son tres ejecutables:
1. BTAudioOn.exe para dirigir el sonido al Midland
2. BTAudioOff.exe para dejar de dirigir el sonido al Midland
3. BTAudioToggle.exe: es un interruptor que ejecuta si estáparado o para BTAudioOn si está en ejecución.
Te basta con meter en tu pda el 1 y 2 o sólo el 3 (no pasa nada si metes los tres!)
Para que funcione debes tener encendidos (y emparejados) la PDA y el Midland. Y como no, seleccionado el Midland en la PDA. Es decir el proceso normal cuando utilizamos el Midland como manos libres. Después ejecutas el BTAudioOn.exe y ya está!
En HTC P3600 hay que tocar le registro:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
Además, cuando uso el BTAudioOn.exe, después tengo que apretar el botón azul del Midland (el que hace de voice command) un par de veces y ya se calla la PDA y se oye por los cascos.
Además hay otro problemilla menor :
Si entra un llamada de teléfono o realizas una llamada el programa BTAudioOn.exe se corta y hay que volverlo a ejecutar. Y si estás en moto con guantes y tal es un rollito. La solución es un programa que se encarga de re-ejecutar el BTAudioOn, automáticamente.
- Descárgate e instala en tu PDA Mortscript. Lo tienes aquí http://www.sto-helit.de/modules/edito/content.php?id=38.
- Descárgate y guarda en tu PDA donde quieras este fichero sonido-bt.mscr desde http://mihd.net/ygu85k.
Este es el fichero que debes ejecutar ahora y no el BTAudioON.exe. El programa has de ejecutarlo en las mismas condiciones, es decir, ambos bluettoth encendidos y sincronizados. Muy importante: en este caso el BTaudioOn.exe debe estar en la carpeta "My Documents" de tu PDA. Queda residente encargándose de reconectar los dispositivos despues de una llamada.
Para que deje de estar en ejecución basta con apagar alguno de los bluetooth.
Hi. I've tried this (translated courtesy of Altavista's Babel Fish Translation Services), but to no avail. I can hear some sizzling noise on my bluetooth headset, but when I start an MP3 file, it still plays the audio through the phone's speaker. I have the P3600i. Can someone help please? Thanks!
Also no sound
Hi,
have you ever solved this problem?
I fear you haven't I read since days, my TRIN has the skipping problem, but neither unskipping tricks nor redirection works. What a shame.
IsiT_de...
i have never found a good solution. I am using a newer rom eligant 2.11 and it seems to work ok
Donation grant: 6.1 GER + A2DP on Trinity
Hi,
well, your advantage is that you are using an english ROM. I prefer a german one, and here, the choice is limited.
I just went back to WM5, what a shame, since 6.1 performed really well, except this A2DP problem.
I also can't understand why this problem exists - isn't it possible to extract the BT stack from the perfectly working WM5 and integrate it into the WM6? Probably not. If I am wrong: I am definitely going to donate more than a buck if anyone can get 6.1 + A2DP working on a german Trinity, w/o making the machine slow or something worse. And I bet there are other who would join me!
Anyone who feels like trying?
IsiT_de...

How to unlock Car PC using Windows CE 5.0

Hi
I have the following Car PC A2270P from Roadrover ( http://www.roadrover.cn/E/productshow.asp?id=49&mnid=19046 ).
Tech specs :
- CPU 400MHZ (manufacturer unknown)
- 128 MB DDR RAM
- 128 MB NAND Flash
- Windows CE 5.0 ( as written in the user manual )
It has a USB port (that reads only flash USB)
It has a SD slot
In the shipped SD 1 GB card, a GPS Navigation application Route66 was included "Navigate7.exe". It is launched by pressing "NAVI" button
Once installed in my car, I found that Windows mobile was "locked" .
Only *.txt and audio and video files can be browsed and executed.
I can not install any additional application on the SD card.
In the SD card I tried the following :
- added dll included in "packdllxania.zip"
- added GSFinder.exe (file explorer), renamed it "Navigate7.exe" instead of the Route66 application.
- Pressed the "NAVI" button hoping that GSFinder will be launched instead of the GPS application. But I got an error message saying that the GPS application could not start
Do you have any idea how to :
- backup the installed Windows and applications
- unlock the installed Windows in order to have a "real" Car PC on which I can install my programs
Thanks for your help
try this file rename autorun.exe to Navigate7.exe make sure the .dll file is in the same folder as autorun.exe it works like a charm 4 me.
unlock car PC
Guys if you have a USB port hook up a keyboard.
Press crtl alt del
Task manager will come up
Kill Mgr app - wait a few seconds "End Now" will apear click end now on the touch screen window will close and you are in Windows ce.
carpc help
Hola , veo que controlais bastante mas que yo con estos aparatos ,asi que te hago una consulta por si alguien me puede ayudar, algo que te agradeceria mucho.
El caso es que compre un car pc para el toyota land cruiser ......y manipulando erroneamente borré aparentemente el sistema operativo y no arranca el sistema operativo , se ve todo azul ,solo funciona la camara con la marcha atrás, y cuando quitas la marcha atras puedes poner los discos de pelis y audio.....Supongo que la solucion es reinstalar todo el sistema operativo , pero no sé como hacerlo .Adjunto un enlace de un video que he subido a youtube donde se ve lo que hace....bueno lo que no hace jejejee....
Pues lo dicho , si alguien me pudiera ayudar lo agradeceria mucho.
Un saludo y gracias por anticipado.
http://www.youtube.com/watch?v=ONpoL...e=channel_page
Have any of that worked for you?
There is another way which is to make a file on the SD card named SHELL.SIG
Put the card in and then press the Factory Restart button. It should load Win CE .
But the problem that I am not sure if the DVD CD player and Radio will still work without the factory applications.
Anyone have an idea?
TomTom Device ID work around
Brianbri6
How did you get around a DEVICE ID requirement for the CE 5 Car DVD Player?
I am trying to get any version of TomTom onto a similar device.
Any advice would be welcome, even working TT version numbers would also be a great help.
Thanks
Johnno
brianbri6 said:
try this file rename autorun.exe to Navigate7.exe make sure the .dll file is in the same folder as autorun.exe it works like a charm 4 me.
Click to expand...
Click to collapse

IPAQ 514 dead after flash of WM 6.1

Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
ipaq blogsoft is respensable
I have the same probleme
Nobody helps ?
Nobody helps ?
ça fait deux jours que j'essais de resourdre le probleme sans aucune solution
je suis entrain d'avoir quelques idées dans ce lien
http://www.resco.net/forums/ShowPost.aspx?PostID=2804
sorry if the
text shown below is unreadable or with errors (thanks translate.google.com).
Malheureusement, ce n'est pour les fonctions PDA et les instructions de démarrage, mais 514 est un peu différente de la situation
back into my poor english:
In other words i don't know if this is applicable for IPAQ 514 and in post i've seen that device is alive (shows USB/Serial) but in this situation it seems no any interaction. I've tested to enter bootloader but with any of key combinations to enter bootloader mode , what i have found on the internet the operation was NOT successful.
no news at the moment
I find this text but i dont undrestand You just need the installed program DLLs.. what thos it meen
text :
RESOLUTION:
Use a Windows XP computer with active sync (4.5). Connection is not active, but this is no problem. You just need the installed program DLLs..
Connect the 514 to USB, it will show "connected to USB"
Start the upgrade...
If there is an error message "not found", stop the program and restart it.
Bios upgrade will start and after 2 minutes, the phone is running again...
Link : http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1197769
You need only dynamicaly linked libraries (DLL files) , you don't need full active sync , but this is not relevant to this.
In this case (from text that you find) is 514 alive and computer detects it, but in case what we need to solve (now minimaly for my ipaq) is problem in no communication. when i connect my 514 to my PC it does not found new hardware or do sounds like when you connect already known hardware. in other words PC does not recognize something on other end of the cable. And next problem is: author writes that ipaq or pc shows connected to usb but nothing seems to be applicable to this case.
I have the same probleme I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from the Gost ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
I searching for resolution if I will have news I let it in forum
see you again
Solution!! - it worked for me
this has worked for me:
i assume that you have usb cable plugged into the pc
for english wm6 search hp SP38077
it must match your SKU ID (P/N) otherwise it says you have wrong version.my skuid is:FA908AA#ABB -> SP38077
i have windows vista installed and it works
1) take out the battery
2) remove USB cable if connected
3) insert battery
4) push and hold the silver center of the 4way key and press red phone key (switch on)
or see http://h20000.www2.hp.com/bizsuppor...=3375716&prodTypeId=215348&objectID=c01087938
this will make hard reset
5) computer now recognizes HP USB Sync
if no then remove battery
remove cable
insert battery again
then hold volume down (bottom part of the silver key on left side of phone)
and insert USB
now it will enter bootloader mode and if previosly not installed then now installs hp usb sync
now start HP Rom update utility with your preffered language (en or fr i dont know)
and it will connect to the phone and upgrade a firmware and voila phone is ALIVE !
Please post if you were successfull.
Alwase the same probleme
I make make hard reset with the first solution i see only "No image exists !!" message also whith the second solution and if i conect my device my pc not recognizes my device I'm very angry
there is a diference between HP USB Sync and Microsoft active sync
I dont understand what do you want to tell with HP USB Sync
I have Windows XP
Thank you for your help
Is that i must install Windows Vista
I wait or your help plase
Help me plase
IF I make make hard reset with the first solution i see only "No image exists !!" message also whith the second ; Are you see the message after you make hard reset ??
When I make hard reset with holding volume up and pressing red phone key (switch on) I have a black screen
Have you an idea palse
Think you
Nobody helps ?
i dont know if in XP shows HP USB Sync - but HP USB Sync is mode in which the device is visible for Rom Update Utility (almost in Vista) I will test it in VM
It so terrible with this communication it is so longly. Do you have an IM account (ICQ Skype MSN ?) If Yes then send me your number or nick in Private message and when i will be back to home (in 1 hour ) then we can test it online)
Think you my friend this is my ICQ Number or Email [email protected]
check your mailbox
Nobody helps ?
greeg said:
Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
Click to expand...
Click to collapse
The same thing happened to me. Can anybody help out with this?
No image exists solucion
Buenas a todos, acabo de resolver el problema ayer:
1-lo primero que hay que hacer es quitar la bateria al movil y dejarlo asi unas cuantas horas o hasta el dia siguiente (a mi me funciono dejandolo hasta el dia siguiente)
2-en tu pc con windows xp, WINDOWS VISTA NO, repito WINDOWS VISTA NOO!!! instalar primero el microsoft active sync que viene en el cd de la caja
3-descargar e instalar el rom update para tu idioma de la misma pagina de hp
4-colocar nuevamente la bateria (despues de varias horas)
5-pulsar el boton de bajar volumen lateral y el de izquierda de control central y sin soltarlos conectar el usb al pc
6-ya no deberia aparecer no image exists, mas bien te aparece el mensaje de bootloader y que esta conectado via usb
7-iniciamos el room update que hemos descargado
8-luego de unos minutos el movil vuelve a estar operativo
aclaraciones:
-esto no funciona en windows vista y probablemente si pruebas actualizar ahora el wm6.1 si funcione, siempre y cuando la actualizacion la hagas desde un pc con windows xp (aun no lo he probado)
-tienes que dejar el movil sin la bateria varias horas ya que al principio lo probe sin hacerlo y no me funciono, solo funciono luego de dejarlo sin la bateria por varias horas
-para poder iniciar el room update que se descarga de la pagina de hp tienes que tener instalado antes el microsoft active sync que viene en la caja con el movil de lo contrario te dira que no encuentra un dll
-un dia lleve el movil a un servicio tecnico y me dijeron que no se podia reparar, me gustaria enseñarles tambien como se hace
suerte a todos

Dasaita PX6 zlink MFi failure cannot connect

I just bought a Dasaita PX6 Android head unit with wireless CarPlay and android auto and I cannot get it to connect to my phone at all.
1st) I have the phone paired to the head units Bluetooth
2nd) I have the phone connected to the hotspot from the head unit
zlink automatically opens and starts giving the “MFi IC read fail.” And then will continue to try to connect and every 30-60 seconds will then display “HARDWARE ERR,MFi read fail#”
I’ve tried this with my iPhone and my wife’s iPhone. Both phones same issue.
I’ve gone to the CarPlay connection screen where the head unit will populate but then when I try to connect to it it just sits there on the phone and never connects.
Same issue here. Did you find a solution?
I'm guessing, but I don't believe you can run hotspot and WIRELESS carplay at the same time. I'm pretty sure it's a limitation of the phone. Try WIRED carplay and see if that works. If it does then try wireless again with the hotspot off.
I have been working through the installation of a Wondefoo Headunit in a Mercedes GL350. I purchased the unit off AliExpress. The headunit has zlink installed. I have an iPhone so was using it for Carplay. Bluetooth and WIFI connect okay to the headunit. The first time I booted up the unit zLink connected and Carplay worked. The device is connected to constant 12v power so it powers off to sleep mode and warm starts the next time the ACC power is activated. After the device powered off to sleep mode it would not reconnect to zLink on restart. The "Connecting" message would cycle until I got MFi Hardware Fail, MFi IC Fail and MFi Read Fail #2 messages. If I rebooted the unit, either by disconnecting from constant power or using RST button zLink would then connect, but would fail to connect after next sleep phase. The supplier was no help. I thought it must be a power issue so I worked through the power options on the factory settings menu. Changing the default power mode from "On" to "Memory Status of Last" fixed the problem and zLink now connects automatically on start up. I hope this helps.
GL350 said:
I have been working through the installation of a Wondefoo Headunit in a Mercedes GL350. I purchased the unit off AliExpress. The headunit has zlink installed. I have an iPhone so was using it for Carplay. Bluetooth and WIFI connect okay to the headunit. The first time I booted up the unit zLink connected and Carplay worked. The device is connected to constant 12v power so it powers off to sleep mode and warm starts the next time the ACC power is activated. After the device powered off to sleep mode it would not reconnect to zLink on restart. The "Connecting" message would cycle until I got MFi Hardware Fail, MFi IC Fail and MFi Read Fail #2 messages. If I rebooted the unit, either by disconnecting from constant power or using RST button zLink would then connect, but would fail to connect after next sleep phase. The supplier was no help. I thought it must be a power issue so I worked through the power options on the factory settings menu. Changing the default power mode from "On" to "Memory Status of Last" fixed the problem and zLink now connects automatically on start up. I hope this helps.
Click to expand...
Click to collapse
How to enter that menu option, I can't find it anywhere. Please help me.
Virus1988 said:
How to enter that menu option, I can't find it anywhere. Please help me.
Click to expand...
Click to collapse
On my unit the factory settings menu is located in the "car settings" menu, which is one of the options under the main "settings" app. You may need to scroll down to find it.
To add to my earlier post, I am still trying to get the diversity antenna working properly for radio reception and I disconnected the headunit to work on that. When I reconnected it the same problem reappeared; that is, not connecting unless I repowered or reset the unit. I went back to the power settings and it was still set to "Memory Status of Last". It's hard to know what this function actually means. I toggled it back through the other options and played around with a few other settings and eventually the problem went away. I wasn't very structured in my approach to this so I don't know what change fixed the issue. I am about to install some heat sinks and a fan to avoid any overheating issues which means I will need to depower the unit again. I will do some more trial and error to see if I can work out what the answer might be. It doesn't seem to be anything to do with hotspot settings as I didn't change those.
GL350 said:
On my unit the factory settings menu is located in the "car settings" menu, which is one of the options under the main "settings" app. You may need to scroll down to find it.
To add to my earlier post, I am still trying to get the diversity antenna working properly for radio reception and I disconnected the headunit to work on that. When I reconnected it the same problem reappeared; that is, not connecting unless I repowered or reset the unit. I went back to the power settings and it was still set to "Memory Status of Last". It's hard to know what this function actually means. I toggled it back through the other options and played around with a few other settings and eventually the problem went away. I wasn't very structured in my approach to this so I don't know what change fixed the issue. I am about to install some heat sinks and a fan to avoid any overheating issues which means I will need to depower the unit again. I will do some more trial and error to see if I can work out what the answer might be. It doesn't seem to be anything to do with hotspot settings as I didn't change those.
Click to expand...
Click to collapse
Hello. Try disabling WiFi and USB initialization.
Settings MOD - Mod Settings - Car - Check WiFi after reboot and USB initialization
Hey guys, new here.
So I have a Navifly PX6 head unit installed on my 2019 Honda Civic. I’ve been searching everywhere for a fix for this issue and this thread seems to be the best bet.
So I’ve been getting this hardware error code for almost 2 years now. Along with the code, my steering wheel controls stop working and the clock on my dash becomes unsynchronized. That led me to believe that it was the Canbus adapter. I contacted the manufacturer and got a replacement adapter twice now. both times, it would work for a few months and then start acting up again.
I tried looking up the settings you guys are talking about but can’t seem to find anything like it. I’m also on Android 10 if that helps at all
I’ll add that this doesn’t happen all the time, but usually anywhere between every week, to once a month. And I can fix it every time by just resetting my unit via the Reset pin
I don't pretend to be an expert on this issue, but was trying to provide some input on what seemed to work for me. Last weekend I installed a cooling fan and some heatsinks onto my headunit as I have seen a number of reports of overheating issues. To do that I disconnected from the power, and again when I reconnected I got the same error message as you are getting. I tried my fix (changing the power settings) and it worked again. I don't know why. Your unit must have a factory settings menu somewhere. From what I can see online, different manufacturer's put them in different places in the settings menus. If you have a manual for your unit it may show in there how to access the factory settings. You need to be careful when working in the factory settings as other reports indicate you can mess up your entire system. I limited myself to toggling the power options until the problem went away. This may be more difficult for you to do if it occurs sporadically.
Have you considered whether your performance issues might be an overheating problem? Reports on this forum and others indicate that overheating can cause erratic operation.
What is the Mai error can it be fixed? Will the car play dongle help.
Mimix3 said:
What is the Mai error can it be fixed? Will the car play dongle help.
Click to expand...
Click to collapse
Still haven't been able to fix it, but factory resetting the system seemed to work for the time being. Be careful though as some of my apps became unregistered and I needed to contact customer service. Car play dongle may help? At least in my case, I think there's an issue with one of the wiring harnesses.
Mod Translation
Is there an update that will fix the problem I am having with my radio?
when i turn on my car and the radio is on sometimes the wireless carplay works but when i turn off the radio because i leave the car for an hour... two... two... two days.
When I turn the radio off because I leave the car for an hour...two...a day..... When I go back to the car and turn on the radio, it activates the hotspot so that the radio and phone can connect (wireless carplay), the radio does not activate the hotspot automatically, if I navigate through the settings menu and try to activate it it shows me an error. the power button does not stay ON, and I cannot activate it in any way either manually or automatically.
When this happens to me, I have to hold down the power button on the radio and press it until the radio restarts and again activates the hotspot and allows me to use wireless carplay (sometimes I have to repeat the restart process two or three times until it finally works, again the radio automatically activates the hotspot and the phone works with carplay).
android px6 radio
android version 10
build number rk3399- user debug 10 qq2a.200305.004.a1 eng.hct.20210814.092831 test keys
kernel version 4.19.111+ kernel version 4.19.111+ kernel version 4.19.111+
mcu version mtce_hxd_v3.62e_1
19 September 2020 16:46:43
Original
¿Hola como estas? ¿me puedes ayudar?
¿Hay alguna actualización que solucione el problema que tengo con mi radio?
cuando enciendo mi carro y la radio esta activada a veces funciona el carplay inalámbrico pero cuando apago la radio porque dejo el
Cuando apago la radio porque dejo el coche una hora... dos... al día... Cuando vuelvo al coche y enciendo la radio, se activa el punto de acceso para que la radio y el teléfono se puede conectar (carplay inalámbrico), la radio no activa el punto de acceso automáticamente, si navego por el menú de configuración y trato de activar me muestra un error. el boton de encendido no se queda ENCENDIDO, y no puedo activarlo de ninguna forma ni manual ni automatico.
Cuando esto me sucede, tengo que mantener presionado el botón de encendido de la radio y presionarlo hasta que la radio se reinicia y nuevamente activa el punto de acceso y me permite usar carplay inalámbrico (a veces tengo que repetir el proceso de reinicio dos o tres veces hasta que finalmente funciona, nuevamente la radio activa automáticamente el punto de acceso y el teléfono funciona con carplay).
radio android px6
android versión 10
número de compilación rk3399- depuración de usuario 10 qq2a.200305.004.a1 eng.hct.20210814.092831 claves de prueba
versión del núcleo 4.19.111+ versión del núcleo 4.19.111+
versión mcu mtce_hxd_v3.62e_1
19 de septiembre de 2020 16:46:43
Traducido con www.DeepL.com/Translator (versión gratuita)
zaricuecalo said:
¿Hola como estas? ¿me puedes ayudar?
¿Hay alguna actualización que solucione el problema que tengo con mi radio?
cuando enciendo mi carro y la radio esta activada a veces funciona el carplay inalámbrico pero cuando apago la radio porque dejo el
Cuando apago la radio porque dejo el coche una hora... dos... al día... Cuando vuelvo al coche y enciendo la radio, se activa el punto de acceso para que la radio y el teléfono se puede conectar (carplay inalámbrico), la radio no activa el punto de acceso automáticamente, si navego por el menú de configuración y trato de activar me muestra un error. el boton de encendido no se queda ENCENDIDO, y no puedo activarlo de ninguna forma ni manual ni automatico.
Cuando esto me sucede, tengo que mantener presionado el botón de encendido de la radio y presionarlo hasta que la radio se reinicia y nuevamente activa el punto de acceso y me permite usar carplay inalámbrico (a veces tengo que repetir el proceso de reinicio dos o tres veces hasta que finalmente funciona, nuevamente la radio activa automáticamente el punto de acceso y el teléfono funciona con carplay).
radio android px6
android versión 10
número de compilación rk3399- depuración de usuario 10 qq2a.200305.004.a1 eng.hct.20210814.092831 claves de prueba
versión del núcleo 4.19.111+ versión del núcleo 4.19.111+
versión mcu mtce_hxd_v3.62e_1
19 de septiembre de 2020 16:46:43
Traducido con www.DeepL.com/Translator (versión gratuita)
Click to expand...
Click to collapse
Mod Translation
I use a mod of this forum for my radio that cost me 10 €, anyway sometimes it fails equally, the only solution is that before turning on the radio you activate wifi and blueto and then see if the app goes but just as you restart and should go to the first, if you have the option to make carplay zlink open namas turn on the radio is a good option too. I hope to have helped you.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla Igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Virus1988 said:
Mod Translation
I use a mod of this forum for my radio that cost me 10 €, anyway sometimes it fails equally, the only solution is that before turning on the radio you activate wifi and blueto and then see if the app goes but just as you restart and should go to the first, if you have the option to make carplay zlink open namas turn on the radio is a good option too. I hope to have helped you.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla Igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Click to expand...
Click to collapse
Yes this is the problem with MTCx devices, including modded ROMs. Consider just using the android on the device, if Android Auto is want you want, these Chinese origin hacked devices are not what you want.
Virus1988 said:
Traducción de mods
Yo uso un mod de este foro para mi radio que me costó 10€, de todos modos a veces falla igual, la única solución es que antes de encender la radio actives wifi y blueto y luego ver si la app va pero igual reinicias y debe ir a la primera, si tiene la opcion de hacer carplay zlink open namas encender la radio tambien es una buena opcion. Espero haberte ayudado.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Click to expand...
Click to collapse
hello. the problem is that when i turn on the radio if the access point or the wifi does not activate itself, if i go into settings it is impossible to activate it so i have to restart the radio.
Sometimes it activates itself correctly and even then I have to do another reboot because it doesn't connect to the iphone.
marchnz said:
Sí, este es el problema con los dispositivos MTCx, incluidas las ROM modificadas. Considere simplemente usar Android en el dispositivo, si Android Auto es lo que desea, estos dispositivos pirateados de origen chino no son lo que desea.
Click to expand...
Click to collapse
hello i have an iphone 12 ios 14.3
hola tengo un iphone 12 ios 14.3
hello, modifying things I have realized that if in the bluetooth settings you deactivate autoconect and automatic response, when you restart the radio the access point is activated and then I only have to go back to bluetooth settings and activate the autoconect and it works.
Is it possible that there is a conflict between bluetooth and wifi?
hola, modificando cosas me he dado cuenta que si en los ajustes de bluetooth desactivas autoconect y respuesta automatica, al reiniciar la radio se activa el punto de acceso y luego solo tengo que volver a ajustes de bluetooth y activar el autoconect y funciona.
¿Es posible que haya un conflicto entre bluetooth y wifi?

Categories

Resources