I just bought a Dasaita PX6 Android head unit with wireless CarPlay and android auto and I cannot get it to connect to my phone at all.
1st) I have the phone paired to the head units Bluetooth
2nd) I have the phone connected to the hotspot from the head unit
zlink automatically opens and starts giving the “MFi IC read fail.” And then will continue to try to connect and every 30-60 seconds will then display “HARDWARE ERR,MFi read fail#”
I’ve tried this with my iPhone and my wife’s iPhone. Both phones same issue.
I’ve gone to the CarPlay connection screen where the head unit will populate but then when I try to connect to it it just sits there on the phone and never connects.
Same issue here. Did you find a solution?
I'm guessing, but I don't believe you can run hotspot and WIRELESS carplay at the same time. I'm pretty sure it's a limitation of the phone. Try WIRED carplay and see if that works. If it does then try wireless again with the hotspot off.
I have been working through the installation of a Wondefoo Headunit in a Mercedes GL350. I purchased the unit off AliExpress. The headunit has zlink installed. I have an iPhone so was using it for Carplay. Bluetooth and WIFI connect okay to the headunit. The first time I booted up the unit zLink connected and Carplay worked. The device is connected to constant 12v power so it powers off to sleep mode and warm starts the next time the ACC power is activated. After the device powered off to sleep mode it would not reconnect to zLink on restart. The "Connecting" message would cycle until I got MFi Hardware Fail, MFi IC Fail and MFi Read Fail #2 messages. If I rebooted the unit, either by disconnecting from constant power or using RST button zLink would then connect, but would fail to connect after next sleep phase. The supplier was no help. I thought it must be a power issue so I worked through the power options on the factory settings menu. Changing the default power mode from "On" to "Memory Status of Last" fixed the problem and zLink now connects automatically on start up. I hope this helps.
GL350 said:
I have been working through the installation of a Wondefoo Headunit in a Mercedes GL350. I purchased the unit off AliExpress. The headunit has zlink installed. I have an iPhone so was using it for Carplay. Bluetooth and WIFI connect okay to the headunit. The first time I booted up the unit zLink connected and Carplay worked. The device is connected to constant 12v power so it powers off to sleep mode and warm starts the next time the ACC power is activated. After the device powered off to sleep mode it would not reconnect to zLink on restart. The "Connecting" message would cycle until I got MFi Hardware Fail, MFi IC Fail and MFi Read Fail #2 messages. If I rebooted the unit, either by disconnecting from constant power or using RST button zLink would then connect, but would fail to connect after next sleep phase. The supplier was no help. I thought it must be a power issue so I worked through the power options on the factory settings menu. Changing the default power mode from "On" to "Memory Status of Last" fixed the problem and zLink now connects automatically on start up. I hope this helps.
Click to expand...
Click to collapse
How to enter that menu option, I can't find it anywhere. Please help me.
Virus1988 said:
How to enter that menu option, I can't find it anywhere. Please help me.
Click to expand...
Click to collapse
On my unit the factory settings menu is located in the "car settings" menu, which is one of the options under the main "settings" app. You may need to scroll down to find it.
To add to my earlier post, I am still trying to get the diversity antenna working properly for radio reception and I disconnected the headunit to work on that. When I reconnected it the same problem reappeared; that is, not connecting unless I repowered or reset the unit. I went back to the power settings and it was still set to "Memory Status of Last". It's hard to know what this function actually means. I toggled it back through the other options and played around with a few other settings and eventually the problem went away. I wasn't very structured in my approach to this so I don't know what change fixed the issue. I am about to install some heat sinks and a fan to avoid any overheating issues which means I will need to depower the unit again. I will do some more trial and error to see if I can work out what the answer might be. It doesn't seem to be anything to do with hotspot settings as I didn't change those.
GL350 said:
On my unit the factory settings menu is located in the "car settings" menu, which is one of the options under the main "settings" app. You may need to scroll down to find it.
To add to my earlier post, I am still trying to get the diversity antenna working properly for radio reception and I disconnected the headunit to work on that. When I reconnected it the same problem reappeared; that is, not connecting unless I repowered or reset the unit. I went back to the power settings and it was still set to "Memory Status of Last". It's hard to know what this function actually means. I toggled it back through the other options and played around with a few other settings and eventually the problem went away. I wasn't very structured in my approach to this so I don't know what change fixed the issue. I am about to install some heat sinks and a fan to avoid any overheating issues which means I will need to depower the unit again. I will do some more trial and error to see if I can work out what the answer might be. It doesn't seem to be anything to do with hotspot settings as I didn't change those.
Click to expand...
Click to collapse
Hello. Try disabling WiFi and USB initialization.
Settings MOD - Mod Settings - Car - Check WiFi after reboot and USB initialization
Hey guys, new here.
So I have a Navifly PX6 head unit installed on my 2019 Honda Civic. I’ve been searching everywhere for a fix for this issue and this thread seems to be the best bet.
So I’ve been getting this hardware error code for almost 2 years now. Along with the code, my steering wheel controls stop working and the clock on my dash becomes unsynchronized. That led me to believe that it was the Canbus adapter. I contacted the manufacturer and got a replacement adapter twice now. both times, it would work for a few months and then start acting up again.
I tried looking up the settings you guys are talking about but can’t seem to find anything like it. I’m also on Android 10 if that helps at all
I’ll add that this doesn’t happen all the time, but usually anywhere between every week, to once a month. And I can fix it every time by just resetting my unit via the Reset pin
I don't pretend to be an expert on this issue, but was trying to provide some input on what seemed to work for me. Last weekend I installed a cooling fan and some heatsinks onto my headunit as I have seen a number of reports of overheating issues. To do that I disconnected from the power, and again when I reconnected I got the same error message as you are getting. I tried my fix (changing the power settings) and it worked again. I don't know why. Your unit must have a factory settings menu somewhere. From what I can see online, different manufacturer's put them in different places in the settings menus. If you have a manual for your unit it may show in there how to access the factory settings. You need to be careful when working in the factory settings as other reports indicate you can mess up your entire system. I limited myself to toggling the power options until the problem went away. This may be more difficult for you to do if it occurs sporadically.
Have you considered whether your performance issues might be an overheating problem? Reports on this forum and others indicate that overheating can cause erratic operation.
What is the Mai error can it be fixed? Will the car play dongle help.
Mimix3 said:
What is the Mai error can it be fixed? Will the car play dongle help.
Click to expand...
Click to collapse
Still haven't been able to fix it, but factory resetting the system seemed to work for the time being. Be careful though as some of my apps became unregistered and I needed to contact customer service. Car play dongle may help? At least in my case, I think there's an issue with one of the wiring harnesses.
Mod Translation
Is there an update that will fix the problem I am having with my radio?
when i turn on my car and the radio is on sometimes the wireless carplay works but when i turn off the radio because i leave the car for an hour... two... two... two days.
When I turn the radio off because I leave the car for an hour...two...a day..... When I go back to the car and turn on the radio, it activates the hotspot so that the radio and phone can connect (wireless carplay), the radio does not activate the hotspot automatically, if I navigate through the settings menu and try to activate it it shows me an error. the power button does not stay ON, and I cannot activate it in any way either manually or automatically.
When this happens to me, I have to hold down the power button on the radio and press it until the radio restarts and again activates the hotspot and allows me to use wireless carplay (sometimes I have to repeat the restart process two or three times until it finally works, again the radio automatically activates the hotspot and the phone works with carplay).
android px6 radio
android version 10
build number rk3399- user debug 10 qq2a.200305.004.a1 eng.hct.20210814.092831 test keys
kernel version 4.19.111+ kernel version 4.19.111+ kernel version 4.19.111+
mcu version mtce_hxd_v3.62e_1
19 September 2020 16:46:43
Original
¿Hola como estas? ¿me puedes ayudar?
¿Hay alguna actualización que solucione el problema que tengo con mi radio?
cuando enciendo mi carro y la radio esta activada a veces funciona el carplay inalámbrico pero cuando apago la radio porque dejo el
Cuando apago la radio porque dejo el coche una hora... dos... al día... Cuando vuelvo al coche y enciendo la radio, se activa el punto de acceso para que la radio y el teléfono se puede conectar (carplay inalámbrico), la radio no activa el punto de acceso automáticamente, si navego por el menú de configuración y trato de activar me muestra un error. el boton de encendido no se queda ENCENDIDO, y no puedo activarlo de ninguna forma ni manual ni automatico.
Cuando esto me sucede, tengo que mantener presionado el botón de encendido de la radio y presionarlo hasta que la radio se reinicia y nuevamente activa el punto de acceso y me permite usar carplay inalámbrico (a veces tengo que repetir el proceso de reinicio dos o tres veces hasta que finalmente funciona, nuevamente la radio activa automáticamente el punto de acceso y el teléfono funciona con carplay).
radio android px6
android versión 10
número de compilación rk3399- depuración de usuario 10 qq2a.200305.004.a1 eng.hct.20210814.092831 claves de prueba
versión del núcleo 4.19.111+ versión del núcleo 4.19.111+
versión mcu mtce_hxd_v3.62e_1
19 de septiembre de 2020 16:46:43
Traducido con www.DeepL.com/Translator (versión gratuita)
zaricuecalo said:
¿Hola como estas? ¿me puedes ayudar?
¿Hay alguna actualización que solucione el problema que tengo con mi radio?
cuando enciendo mi carro y la radio esta activada a veces funciona el carplay inalámbrico pero cuando apago la radio porque dejo el
Cuando apago la radio porque dejo el coche una hora... dos... al día... Cuando vuelvo al coche y enciendo la radio, se activa el punto de acceso para que la radio y el teléfono se puede conectar (carplay inalámbrico), la radio no activa el punto de acceso automáticamente, si navego por el menú de configuración y trato de activar me muestra un error. el boton de encendido no se queda ENCENDIDO, y no puedo activarlo de ninguna forma ni manual ni automatico.
Cuando esto me sucede, tengo que mantener presionado el botón de encendido de la radio y presionarlo hasta que la radio se reinicia y nuevamente activa el punto de acceso y me permite usar carplay inalámbrico (a veces tengo que repetir el proceso de reinicio dos o tres veces hasta que finalmente funciona, nuevamente la radio activa automáticamente el punto de acceso y el teléfono funciona con carplay).
radio android px6
android versión 10
número de compilación rk3399- depuración de usuario 10 qq2a.200305.004.a1 eng.hct.20210814.092831 claves de prueba
versión del núcleo 4.19.111+ versión del núcleo 4.19.111+
versión mcu mtce_hxd_v3.62e_1
19 de septiembre de 2020 16:46:43
Traducido con www.DeepL.com/Translator (versión gratuita)
Click to expand...
Click to collapse
Mod Translation
I use a mod of this forum for my radio that cost me 10 €, anyway sometimes it fails equally, the only solution is that before turning on the radio you activate wifi and blueto and then see if the app goes but just as you restart and should go to the first, if you have the option to make carplay zlink open namas turn on the radio is a good option too. I hope to have helped you.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla Igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Virus1988 said:
Mod Translation
I use a mod of this forum for my radio that cost me 10 €, anyway sometimes it fails equally, the only solution is that before turning on the radio you activate wifi and blueto and then see if the app goes but just as you restart and should go to the first, if you have the option to make carplay zlink open namas turn on the radio is a good option too. I hope to have helped you.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla Igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Click to expand...
Click to collapse
Yes this is the problem with MTCx devices, including modded ROMs. Consider just using the android on the device, if Android Auto is want you want, these Chinese origin hacked devices are not what you want.
Virus1988 said:
Traducción de mods
Yo uso un mod de este foro para mi radio que me costó 10€, de todos modos a veces falla igual, la única solución es que antes de encender la radio actives wifi y blueto y luego ver si la app va pero igual reinicias y debe ir a la primera, si tiene la opcion de hacer carplay zlink open namas encender la radio tambien es una buena opcion. Espero haberte ayudado.
Original
Yo uso un mod de este foro para mi radio que me costo 10€, de todas maneras a veces falla igualmente, la unica solucion es que antes de encender la radio actives wifi y blueto y luego ver si va la app sino tal cual reinicias y deberia ir a la primera, si tienes la opcion de hacer que carplay zlink abra namas encender la radio es una buena opcion tambien. Un saludo espero haberte ayudado.
Click to expand...
Click to collapse
hello. the problem is that when i turn on the radio if the access point or the wifi does not activate itself, if i go into settings it is impossible to activate it so i have to restart the radio.
Sometimes it activates itself correctly and even then I have to do another reboot because it doesn't connect to the iphone.
marchnz said:
Sí, este es el problema con los dispositivos MTCx, incluidas las ROM modificadas. Considere simplemente usar Android en el dispositivo, si Android Auto es lo que desea, estos dispositivos pirateados de origen chino no son lo que desea.
Click to expand...
Click to collapse
hello i have an iphone 12 ios 14.3
hola tengo un iphone 12 ios 14.3
hello, modifying things I have realized that if in the bluetooth settings you deactivate autoconect and automatic response, when you restart the radio the access point is activated and then I only have to go back to bluetooth settings and activate the autoconect and it works.
Is it possible that there is a conflict between bluetooth and wifi?
hola, modificando cosas me he dado cuenta que si en los ajustes de bluetooth desactivas autoconect y respuesta automatica, al reiniciar la radio se activa el punto de acceso y luego solo tengo que volver a ajustes de bluetooth y activar el autoconect y funciona.
¿Es posible que haya un conflicto entre bluetooth y wifi?
Related
Why can nobody answer the question to get sound directed to MONO bluetooth headset? I see many people cooking roms, making apps, testing touch flow but nobody with a real answer for trinity with sound to Mono headset. Lets face it 95% of us are walking down the road with a Mono headset. I would like to here sound from the Media player and the GPS the most. Please dont tell me to search the forums. I have looked everywhere and tried hundreds of bluetooth apps in many different ways. Most of us are using one of the cooked roms from here(great work BTW) and there using MS BT stack. I would like to here from someone that has it working or can create an app. I will even donate to the cause.
have you read this post:
http://forum.xda-developers.com/showthread.php?t=278778
I hav'nt tried it, but it seems to work in some cases
/BeeBo
look at Bluetoothaudio here : http://www.trianglepowers.com/
I used this soft with my old QTEK8300, and it worked perfectly.
But currently, it doesn't work on my trinity + Faman 3.4.
Maybe it will work on your device ?
please let me know if it works for you, cause I really would like to have the GPS sounds directly on my samsung WEP200.
There is a simple MortScript which does this. I use it on my M700 and it works a treat.
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
b1cnrt73 said:
tried everyone with multiple headsets!
Can anyone confirm that anyone has a Trinity working. I know it should be a simple app. Every app I've tired turns the bt on and can hear a hiss from it but still does not redirect sound!
Click to expand...
Click to collapse
I use my helmet BT headset (mono device) to hear music, phone and gps from my Trini, while riding my bike. You can bet it works!
I explain everything in my scooter forum. Sorry but it´s in spanish and I have no time for translation
Fundamentalmente se trata de instalar un programa como el BTAudioOn.exe, que te direcciona todo el sonido hacia el "manos libres".
El programa BTAudioOn.exe te lo puedes bajar de aquí http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Los ficheros son ejecutables directos. No requieren instalación en la PDA. Los copias en la carpeta "Mis Documentos" o "Archivos de programa" (o la que quieras) y los ejecutas desde el explorador de windows, o desde un acceso directo (si usas algún programa que te permita tener iconos de acceso directo).
En realidad verás que son tres ejecutables:
1. BTAudioOn.exe para dirigir el sonido al Midland
2. BTAudioOff.exe para dejar de dirigir el sonido al Midland
3. BTAudioToggle.exe: es un interruptor que ejecuta si estáparado o para BTAudioOn si está en ejecución.
Te basta con meter en tu pda el 1 y 2 o sólo el 3 (no pasa nada si metes los tres!)
Para que funcione debes tener encendidos (y emparejados) la PDA y el Midland. Y como no, seleccionado el Midland en la PDA. Es decir el proceso normal cuando utilizamos el Midland como manos libres. Después ejecutas el BTAudioOn.exe y ya está!
En HTC P3600 hay que tocar le registro:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
Además, cuando uso el BTAudioOn.exe, después tengo que apretar el botón azul del Midland (el que hace de voice command) un par de veces y ya se calla la PDA y se oye por los cascos.
Además hay otro problemilla menor :
Si entra un llamada de teléfono o realizas una llamada el programa BTAudioOn.exe se corta y hay que volverlo a ejecutar. Y si estás en moto con guantes y tal es un rollito. La solución es un programa que se encarga de re-ejecutar el BTAudioOn, automáticamente.
- Descárgate e instala en tu PDA Mortscript. Lo tienes aquí http://www.sto-helit.de/modules/edito/content.php?id=38.
- Descárgate y guarda en tu PDA donde quieras este fichero sonido-bt.mscr desde http://mihd.net/ygu85k.
Este es el fichero que debes ejecutar ahora y no el BTAudioON.exe. El programa has de ejecutarlo en las mismas condiciones, es decir, ambos bluettoth encendidos y sincronizados. Muy importante: en este caso el BTaudioOn.exe debe estar en la carpeta "My Documents" de tu PDA. Queda residente encargándose de reconectar los dispositivos despues de una llamada.
Para que deje de estar en ejecución basta con apagar alguno de los bluetooth.
Hi. I've tried this (translated courtesy of Altavista's Babel Fish Translation Services), but to no avail. I can hear some sizzling noise on my bluetooth headset, but when I start an MP3 file, it still plays the audio through the phone's speaker. I have the P3600i. Can someone help please? Thanks!
Also no sound
Hi,
have you ever solved this problem?
I fear you haven't I read since days, my TRIN has the skipping problem, but neither unskipping tricks nor redirection works. What a shame.
IsiT_de...
i have never found a good solution. I am using a newer rom eligant 2.11 and it seems to work ok
Donation grant: 6.1 GER + A2DP on Trinity
Hi,
well, your advantage is that you are using an english ROM. I prefer a german one, and here, the choice is limited.
I just went back to WM5, what a shame, since 6.1 performed really well, except this A2DP problem.
I also can't understand why this problem exists - isn't it possible to extract the BT stack from the perfectly working WM5 and integrate it into the WM6? Probably not. If I am wrong: I am definitely going to donate more than a buck if anyone can get 6.1 + A2DP working on a german Trinity, w/o making the machine slow or something worse. And I bet there are other who would join me!
Anyone who feels like trying?
IsiT_de...
Hi first of all sorry for my English, I speak Spanish and use the google translator. Thanks.
Well, as the title says, my PDA does not run.
XDAndroid was running, was discharged and went out. Did not catch more.
I put a load, did not catch, I thought (Very downloaded) and I left an hour later I returned and was completely cold, I try to ignite anything (scared me).
After many attempts, definitely not given the desire to light. (I panicked thinking that the processor was so cold that I found the phone after 1 hour charge.)
I got home and I kept fighting (disappointed) and Bang! Lit!, left the HTC logo, then the boot HTC Sonidito and boom again, went off!.
I am excited and I kept giving and re-turn, removed the magazine and came to the screen that says "windows" and left the 4 balls of "hourglass" of multiple colors and said: He lit!, but he gave warning super battery low (just rang) and went out.
At this point I do not think (and I do not want most of all) that may be the processor, I guess you have to "process"to get there.
The PC no longer recognizes that "USB Composite Device" is not to do, I despair!
Thanks in advance!.
Click to expand...
Click to collapse
In Spanish:
Bueno, como dice el titulo, mi PDA no prende.
Estaba corriendo XDAndroid, se descargó y se apagó. No prendió más.
Lo puse a cargar, no prendió, pensé (Muy descargado) y lo dejé, una hora después regresé y estaba totalmente frío, lo intente prender y nada (me asusté).
Luego de muchos intentos, Definitivamente, no se le dió la gana de prender. (Me aterré pensando que fuera el procesador por lo frío que encontré el teléfono luego de 1 hora de carga.)
Llegué a casa y seguí luchando (decepcionadamente) y Pum! Prendió!, salió el logo de HTC, luego el sonidito de HTC de arranque y pum de nuevo, se apagó!.
Me he emocionado y seguí dandole y volvió a prender, quité el cargador y llegó a la pantalla que dice "windows" y salieron las 4 bolitas de "reloj de arena" de multiples colores y dije: Prendió!!, pero no, dió alerta de batería super baja (solo sonó) y se apagó.
A esas alturas no creo (y no quiero mas que todo) que pueda ser el procesador, supongo hay que "procesar" para llegar hasta allá.
La PC no reconoce más que "Dispositivo compuesto USB", no se que hacer, me desespero !
Gracias de antemano!.
Click to expand...
Click to collapse
i think your battery is dead. try to replace the battery with a new one.
Intenta el reset estando conectado al cargador, si es la batería estando conectado debieras de poder arrancar sin problema de otra forma puede ser que ya no carga y seria la fuente.
Buen día.
Tengo un Moto Z2 play que sufrió de un accidente en el cual la pantalla terminó dañada pero no inservible. después de meses funcionando, un día se puso la pantalla totalmente negra, seguía respondiendo al lector de huella y a las vibraciones pero no podía ver nada.
Después de meses sin uso, la batería del moto z2 play quedó totalmente agotada, compre una pantalla nueva y procedí a cambiarla. al conectarla antes de sellarla, lo conecte al cargador para asegurar que la pantalla funcionaba, arrojo el logo de cargando. al llegar al 1% de batería procedí a encenderlo. pero desde que presione el botón hasta que vibró de encendido nunca mostró nada en la pantalla. terminó el proceso de encendido y podía escuchar que el celular funcionaba y respondía. tengo la ligera sospecha que el sensor de proximidad esta fallando y no deja que se vea algo en la pantalla. ¿tendrán alguna idea de que podrá ser?
¡Un saludo muy grande!
Good day.
I have a Moto Z2 play that suffered an accident in which the screen ended damaged but not unusable. after months of work, one day the screen turned totally black, it was still responding to the fingerprint reader and the vibrations but I could not see anything.
After months without use, the battery of the z2 play was totally dead, I bought a new screen and proceeded to change it. when connecting it before sealing it, connect it to the charger to ensure that the screen worked, It throw the logo of loading. When it reached 1% battery I proceeded to turn it on. but since I pressed the button until it vibrated on power it never showed anything on the screen. The booting process was over and I could hear the cell phone working and responding. I have the slight suspicion that the proximity sensor is failing and won't let anything to be seen on the screen. any idea what it could be?
Thanks for your attention!
No I don't think proximity sensor is the issue. It works only for calls not otherwise. So couple of questions here.
1. Did it turn on the display by any means after the incident where you saw a logo?
2. Where did you replace the screen? at local shop or at Moto Service center?
3. Did you blindly try to put your device to recovery? Does it work(turns on) in recovery?
I was watching a video and all of a sudden the display turned off
I thought it was a dead battery so I charged it. to my surprise, the phone is still on
I rebooted it multiple times and I can use the phone using OTG and type-c to HDMI
the digitizer works but the display is a solid black
what could have happened and how can I fix it?
the phone is not bricked
never been rooted
global version
and didnt encounter a shook while in use
Dyou should blow through the fan slit. and then reboot
baaq said:
Estaba viendo un video y de repente la pantalla se apagó
Pensé que era una batería muerta, así que lo cargué. para mi sorpresa, el teléfono sigue encendido
Lo reinicié varias veces y puedo usar el teléfono usando OTG y tipo-c a HDMI
el digitalizador funciona pero la pantalla es de color negro sólido
que pudo haber pasado y como puedo solucionarlo?
el teléfono no está bloqueado
nunca ha sido rooteado
versión mundial
y no encontré una sacudida mientras estaba en uso
Click to expand...
Click to collapse
solucionaste tu problema?
Two months ago (since October), I updated my Samsung Galaxy A22 4G (SM-A225M) to get the latest update "A225MUBS4BVJ1" (aka. October update with September patch). I had been testing the update, no performance loss and nothing new, to be honest. But when I used mobile data, it disconnected some seconds after enabling the mobile data, and it marked me that I had no SIM card inserted, and no signal. It also only reconnected but was disconnected again, thus repeating itself.
That problem was there even if my phone it's in good condition, even the SD card and SIM slots are in good condition, switched the SIM card to another to check if it was a network problem with SIM Operator (it wasn't), and even tried to reset network settings and nothing.
Even in the next update A225MUBS4BVJ1 (November update with October patch), the developers didn't fix it. But I have discovered a possible fix (and temporal until Samsung launches a new update) and it is to switch 4G network mode to only 3G (even 3G/2G). You will have to deal with the slow speed of the internet but at least you will receive calls, and mobile data and signal won't be disconnected every time.
I have my Galaxy A22 4G rooted but I don't know if this problem also happens to non-root users, I have talked about this problem with Samsung Members and nobody has talked about the same problem. More or less except for Samsung Galaxy A32 4G owners, you can check in the next links and the problems seems to be almost the same.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
loss of signal and mobile data every 10 minutes after opening bootloader
Hello everyone, does anyone else have the problem of signal and data loss every 10 minutes after opening bootloader or rooting? Is there a solution so that the signal and mobile data are not cut anymore I am in one ui 4.1
forum.xda-developers.com
So, I'm sure it is a software bug.
December 6th, 2022, Samsung has released a update for Galaxy A22 4G (SM-A225M) of OneUI 5 update but in Panama, and the few of the bugs has been fixed.
I've installed it to my Galaxy A22 4G (SM-A225) with original Carrier ID "TCE", I installed the Panama (TPA) firmware, as TPA firmware is Multi-CSC, I switched my phone's CSC to "MXO" (aka. Mexico).
Note: the Galaxy A Series have a bug when switching ROMs CSC and the CSC switch to one that you didn't wanted.
The experience feels the same like with Android 11 & Android 12, now only with few features added, more personalization and smooth animations. The Mobile network bug has been fixed but... Now the bug in this first version of One UI 5 for this device is that the UI scale for few apps & system apps is broken.
Un modulo para ponerle 120Hz a SM-A225M PORFA
ArmandoDrake said:
Hace dos meses (desde octubre), actualicé mi Samsung Galaxy A22 4G (SM-A225M) para obtener la última actualización "A225MUBS4BVJ1" (también conocida como actualización de octubre con parche de septiembre). Había estado probando la actualización, sin pérdida de rendimiento y nada nuevo, para ser honesto. Pero cuando usé datos móviles, se desconectó unos segundos después de habilitar los datos móviles, y me marcó que no tenía tarjeta SIM insertada y sin señal. También solo se volvió a conectar, pero se desconectó nuevamente, repitiéndose así.
Ese problema estaba allí incluso si mi teléfono está en buenas condiciones, incluso la tarjeta SD y las ranuras SIM están en buenas condiciones, cambié la tarjeta SIM a otra para verificar si era un problema de red con el operador SIM (no lo era), y Incluso intenté restablecer la configuración de red y nada.
Incluso en la próxima actualización A225MUBS4BVJ1 (actualización de noviembre con parche de octubre), los desarrolladores no lo arreglaron. Pero he descubierto una posible solución (y temporal hasta que Samsung lance una nueva actualización) y es cambiar el modo de red 4G a solo 3G (incluso 3G/2G). Tendrás que lidiar con la baja velocidad de Internet, pero al menos recibirás llamadas y los datos móviles y la señal no se desconectarán siempre.
Tengo rooteado mi Galaxy A22 4G pero no se si este problema le pasa también a usuarios no root, he hablado de este problema con Samsung Members y nadie ha hablado del mismo problema. Más o menos, a excepción de los propietarios de Samsung Galaxy A32 4G, puede consultar los siguientes enlaces y los problemas parecen ser casi los mismos.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
https://forum.xda-developers.com/t/...estoy seguro de que es un error de software.
Click to expand...
Click to collapse
http://Ay algún módulo para SM-A225M PARA PONERLE 120Hz
KALED092## said:
Un modulo para ponerle 120Hz a SM-A225M PORFA
Click to expand...
Click to collapse
Hay módulos pero dicho valor no puede ser cambiado forzosamente ya que la pantalla tiene una tasa de 90Hz y no es compatible 120Hz.