Two months ago (since October), I updated my Samsung Galaxy A22 4G (SM-A225M) to get the latest update "A225MUBS4BVJ1" (aka. October update with September patch). I had been testing the update, no performance loss and nothing new, to be honest. But when I used mobile data, it disconnected some seconds after enabling the mobile data, and it marked me that I had no SIM card inserted, and no signal. It also only reconnected but was disconnected again, thus repeating itself.
That problem was there even if my phone it's in good condition, even the SD card and SIM slots are in good condition, switched the SIM card to another to check if it was a network problem with SIM Operator (it wasn't), and even tried to reset network settings and nothing.
Even in the next update A225MUBS4BVJ1 (November update with October patch), the developers didn't fix it. But I have discovered a possible fix (and temporal until Samsung launches a new update) and it is to switch 4G network mode to only 3G (even 3G/2G). You will have to deal with the slow speed of the internet but at least you will receive calls, and mobile data and signal won't be disconnected every time.
I have my Galaxy A22 4G rooted but I don't know if this problem also happens to non-root users, I have talked about this problem with Samsung Members and nobody has talked about the same problem. More or less except for Samsung Galaxy A32 4G owners, you can check in the next links and the problems seems to be almost the same.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
loss of signal and mobile data every 10 minutes after opening bootloader
Hello everyone, does anyone else have the problem of signal and data loss every 10 minutes after opening bootloader or rooting? Is there a solution so that the signal and mobile data are not cut anymore I am in one ui 4.1
forum.xda-developers.com
So, I'm sure it is a software bug.
December 6th, 2022, Samsung has released a update for Galaxy A22 4G (SM-A225M) of OneUI 5 update but in Panama, and the few of the bugs has been fixed.
I've installed it to my Galaxy A22 4G (SM-A225) with original Carrier ID "TCE", I installed the Panama (TPA) firmware, as TPA firmware is Multi-CSC, I switched my phone's CSC to "MXO" (aka. Mexico).
Note: the Galaxy A Series have a bug when switching ROMs CSC and the CSC switch to one that you didn't wanted.
The experience feels the same like with Android 11 & Android 12, now only with few features added, more personalization and smooth animations. The Mobile network bug has been fixed but... Now the bug in this first version of One UI 5 for this device is that the UI scale for few apps & system apps is broken.
Un modulo para ponerle 120Hz a SM-A225M PORFA
ArmandoDrake said:
Hace dos meses (desde octubre), actualicé mi Samsung Galaxy A22 4G (SM-A225M) para obtener la última actualización "A225MUBS4BVJ1" (también conocida como actualización de octubre con parche de septiembre). Había estado probando la actualización, sin pérdida de rendimiento y nada nuevo, para ser honesto. Pero cuando usé datos móviles, se desconectó unos segundos después de habilitar los datos móviles, y me marcó que no tenía tarjeta SIM insertada y sin señal. También solo se volvió a conectar, pero se desconectó nuevamente, repitiéndose así.
Ese problema estaba allí incluso si mi teléfono está en buenas condiciones, incluso la tarjeta SD y las ranuras SIM están en buenas condiciones, cambié la tarjeta SIM a otra para verificar si era un problema de red con el operador SIM (no lo era), y Incluso intenté restablecer la configuración de red y nada.
Incluso en la próxima actualización A225MUBS4BVJ1 (actualización de noviembre con parche de octubre), los desarrolladores no lo arreglaron. Pero he descubierto una posible solución (y temporal hasta que Samsung lance una nueva actualización) y es cambiar el modo de red 4G a solo 3G (incluso 3G/2G). Tendrás que lidiar con la baja velocidad de Internet, pero al menos recibirás llamadas y los datos móviles y la señal no se desconectarán siempre.
Tengo rooteado mi Galaxy A22 4G pero no se si este problema le pasa también a usuarios no root, he hablado de este problema con Samsung Members y nadie ha hablado del mismo problema. Más o menos, a excepción de los propietarios de Samsung Galaxy A32 4G, puede consultar los siguientes enlaces y los problemas parecen ser casi los mismos.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
https://forum.xda-developers.com/t/...estoy seguro de que es un error de software.
Click to expand...
Click to collapse
http://Ay algún módulo para SM-A225M PARA PONERLE 120Hz
KALED092## said:
Un modulo para ponerle 120Hz a SM-A225M PORFA
Click to expand...
Click to collapse
Hay módulos pero dicho valor no puede ser cambiado forzosamente ya que la pantalla tiene una tasa de 90Hz y no es compatible 120Hz.
Related
Hello guys!
I'm from Mexico and I just get a flat data plan for my Diamond but there's no way to get a 3G connection and neither HSDPA.
My carrier is Telcel.
I've already tested the following radios:
3, 5, 6, 8, 11, 14 and 18 with no succeed.
I also replaced the SIM Card for the latest version (v.4) and nothing.
I don't know what else I can do.
My brother have a Tilt and he connects to HSDPA easily; comparing the 2 devices the only difference I noticed is that when selecting the WCDMA band on the Tilt makes the connection with no trouble, but if I do the same on the Diamond, it never make the connection to the network.
Does anybody knows what can I do now?
Should I wait for a new Radio or there's no way to conect to HSDPA on my country with the Diamond?
Thanks.
Does your carrier supports 3G?
What 3G band do you carrier use, and which version if diamond did you get? It might be that your carrier use 850/1900mhz 3G band, and you got a Euro version diamond.
Is 3G actually switched on or are you camped to 2g? Check COMM MANAGER and make sure 3G is enabled?
joshyth said:
What 3G band do you carrier use, and which version if diamond did you get? It might be that your carrier use 850/1900mhz 3G band, and you got a Euro version diamond.
Click to expand...
Click to collapse
I think it is 850/1900mhz...
winwiz said:
Is 3G actually switched on or are you camped to 2g? Check COMM MANAGER and make sure 3G is enabled?
Click to expand...
Click to collapse
Enabled.
I refuse to believe my phone is not compatible with the local network
1. You havent told us which phone version you have. US or the original one?
2. If you "refuse to believe" anything, your'e not going to get accurate data, now are you?
jpdediego said:
Enabled.
I refuse to believe my phone is not compatible with the local network
Click to expand...
Click to collapse
DrewVS said:
1. You havent told us which phone version you have. US or the original one?
2. If you "refuse to believe" anything, your'e not going to get accurate data, now are you?
Click to expand...
Click to collapse
LOL
1. I don't know the version of my phone; I bought it in the US but this was before the release for US, so I'm not certain.
Is there any way to verify which version I have?
2. I said I refuse to believe that because of the great programmers that are loose in this forum; they can do practically everything they want if the device is capable; and I'm pretty sure the Diamond is compatible with this network; I'm hoping there will be a Radio version that will activate [email protected]
Thank you for all your post and interest; this is a great community
I forgot where to check this, but do check if your diamond is DIAM100 or DIAM110. If you got DIAM100, then it mean you got the Euro version, so no 3G for you.
Front Camera
More easy, if you have the front camera you have European Version, and not have 3G, the american version not have front camera.
Lamentablemente nos engañan permanentemente, si es cuatribanda en telefonía pero no en 3G- y según los que saben no tiene arreglo porque es un tema de hard.
Suerte
Carlos
calito said:
More easy, if you have the front camera you have European Version, and not have 3G, the american version not have front camera.
Lamentablemente nos engañan permanentemente, si es cuatribanda en telefonía pero no en 3G- y según los que saben no tiene arreglo porque es un tema de hard.
Suerte
Carlos
Click to expand...
Click to collapse
Well, thanks to everybody
Diamond European Version for sale!!!
Anyone???
LOL
Carlos: muchas muchas gracias!
i have Euro version... and 3G... although i am in Europe
3G illusion
Si quieren tener,al menos, la ilusion del 3G instalen en la version europea el ultimo rom NiAX Special Edition by vauss. Marca 3G y consume como si...Una rareza.
marioadrian said:
Si quieren tener,al menos, la ilusion del 3G instalen en la version europea el ultimo rom NiAX Special Edition by vauss. Marca 3G y consume como si...Una rareza.
Click to expand...
Click to collapse
Pero no te conecta a 3G cierto??? Creo que yo tambien voy a vender el mio, digo la verdad me encanta pero es europeo y por lo que veo de plano si es un tema de hardware o al menos no veo que alguien este haciendo un esfuerzo serio para ver como utilizar un Diamond Europen en 3G Americano.
No North America 3G in this version. It is not a software fixable issue. It is much easier to come to the facts when one believes...
jpdediego said:
Well, thanks to everybody
Diamond European Version for sale!!!
Anyone???
LOL
Carlos: muchas muchas gracias!
Click to expand...
Click to collapse
No, no me conecta; al menos no noto diferencia de velocidad.Por algun motivo consume una cantidad enorme de batería y se enciende el icono de 3G en lugar de la E que tengo en los otros roms.
Uno mas al club...
Hola paisano
Yo tambien ya cambie con todas las rom, y checando el foro esperando a que alguien haga el milagro, pero creo que ya valió...
Lo que si, es que de todos modos con el plan ilimitado me sirve bastante bien el cel, y checa mi correo cada 10 minutos, con un uso normal me dura entre uno y dos dias la bateria. Estoy utilizando la version elite 3.0 WWE y radio.05 con buena recepción.
Ahi si se enteran de que alguien hizo lo imposible y hace funcionar la version europea con 3G me chiflan...
Saludos!!!
Screen in american version
The american version have a yellow screen (cremita) and the european is snow white. If you have both in your hands for me the european is better.
http://forum.xda-developers.com/showthread.php?t=411487
Si no usan el 3G la eropea tiene una pantalla muy blanca y la americana es medio triste y le faltan contrastes (tuve las dos en mis manos), por lo tanto analicen bien que quieren, ya que está por salir a la venta la bateria de 1300 original y queda un maquinón. Si son 3g dependientes no tiene arreglo
Carlos
That is not correct; only a few NA units had poor color balance.
calito said:
The american version have a yellow screen (cremita) and the european is snow white. If you have both in your hands for me the european is better.
http://forum.xda-developers.com/showthread.php?t=411487
Si no usan el 3G la eropea tiene una pantalla muy blanca y la americana es medio triste y le faltan contrastes (tuve las dos en mis manos), por lo tanto analicen bien que quieren, ya que está por salir a la venta la bateria de 1300 original y queda un maquinón. Si son 3g dependientes no tiene arreglo
Carlos
Click to expand...
Click to collapse
According to HTC, they told me that the 3G Touch Diamond that has no front camera is the same as the European version. On my phone I show an H, most of the time and E all the other times. Every now and then I will see 3G, but just for a second then ..x...then it picks up E.
Hello,
I'm from Peru. I just flashed CM7 1.0-RC1.5-jordan-signed to my Defy, everything went well but I couldn't get phone calls or 3G to work, so I changed the baseband to Brazil Claro (couldn't find the one for Claro Peru). Then Phone and sms worked fine but no data connection at all. I managed to manually change the APN parameters with a Claro Peru web tutorial and the "H" finally appeared.
However, I can navigate over browsers (opera mobile and android stock one) but apps cannot connect. And I mean every app (K-9 mail, Gmail, Facebook, BT Gangsta game, and anyother that uses data connection).
It has to be with the baseband or apn parameters are wrong? Anyone with similar experience? Do I have to fix or flash anything else?
Thanks!
Try *#*#4636*#*# and than from phone settings make WCDMA ONLY or try any other...and check
Sent from my MB525 using XDA App
Same problem here.
Upgraded to CM7 1.0-RC1.5-jordan-signed and everything is working fine except these:-
1.> My defy keeps on loosing signal. And when I do manual search for network, it gives me airtel and Idea but not Vodafone. All other people are fine on Vodafone.
2.> No edge. Getting G instead of E in the notification area
3.> SMS do not have threaded view.
4.> Music player no longer displays lyrics as it used to do in the original.
The original version was: 3.4.3-36-1.7
Apart from these issues, everything is working just perfect. loved the overall look. Much better then the original.
So any help will be highly appreciated.
---------- Post added at 06:36 PM ---------- Previous post was at 05:41 PM ----------
mandhir.s.bajwa said:
Same problem here.
Upgraded to CM7 1.0-RC1.5-jordan-signed and everything is working fine except these:-
1.> My defy keeps on loosing signal. And when I do manual search for network, it gives me airtel and Idea but not Vodafone. All other people are fine on Vodafone.
2.> No edge. Getting G instead of E in the notification area
3.> SMS do not have threaded view.
4.> Music player no longer displays lyrics as it used to do in the original.
The original version was: 3.4.3-36-1.7
Apart from these issues, everything is working just perfect. loved the overall look. Much better then the original.
So any help will be highly appreciated.
Click to expand...
Click to collapse
As suggested in another thread, deleted the Cache and delvik cache as well.
Signal strength is still very weak and is failing to detect network after every 1-2 hours.
I'm from Peru too, so there is no point to respond in English, i guess... mi defy primero tuvo el RC 1.0 y me paso lo mismo, solo tenia wifi y no se conectaba a nada mas, de ahi investigando llegue por fin al APN, pero aun asi no se soluciono nada, investigue un poco mas y llegue igual q tu al tema del baseband, la verdad yo tb probe primero con el de brasil, pero no me soluciono casi nada, por ahi consultando me pasaron el dato que con el baseband de china todo iba ok (China RT 0.26.0_1.11.0) asi q lo puse y desde de ahi todo me funciona sin problemas. Como adto extra, hace una semana lo subi a RC 1.5 y la configuracion se mantuvo, pero si has leido por ahi veras q a algunos le daba problemas con el wifi (me incluyo) pero una vez instalado el nightly todo se soluciono
ezubiaurr said:
I'm from Peru too, so there is no point to respond in English, i guess... mi defy primero tuvo el RC 1.0 y me paso lo mismo, solo tenia wifi y no se conectaba a nada mas, de ahi investigando llegue por fin al APN, pero aun asi no se soluciono nada, investigue un poco mas y llegue igual q tu al tema del baseband, la verdad yo tb probe primero con el de brasil, pero no me soluciono casi nada, por ahi consultando me pasaron el dato que con el baseband de china todo iba ok (China RT 0.26.0_1.11.0) asi q lo puse y desde de ahi todo me funciona sin problemas. Como adto extra, hace una semana lo subi a RC 1.5 y la configuracion se mantuvo, pero si has leido por ahi veras q a algunos le daba problemas con el wifi (me incluyo) pero una vez instalado el nightly todo se soluciono
Click to expand...
Click to collapse
ES: Estoy seguro que el no es el unico con este tipo de problemas, y la respuesta podria funcionar para mas gente. Asi que bueno, si hay "punto" en responder en ingles. Sin mencionar que es un foro en "INGLES", creo que las normas de XDA son explicitas..
EN: I'm pretty sure he is not the only one with this kind of issues, and the answer might work for other people. So yeah, there is a point in responding in english. Not to mention this is an English forum, and I'm pretty sure there is a rule that says you can only post things in english.
Zephyrot said:
ES: Estoy seguro que el no es el unico con este tipo de problemas, y la respuesta podria funcionar para mas gente. Asi que bueno, si hay "punto" en responder en ingles. Sin mencionar que es un foro en "INGLES", creo que las normas de XDA son explicitas..
EN: I'm pretty sure he is not the only one with this kind of issues, and the answer might work for other people. So yeah, there is a point in responding in english. Not to mention this is an English forum, and I'm pretty sure there is a rule that says you can only post things in english.
Click to expand...
Click to collapse
Well, It wasn't my intention to be rude or sound like that, I just said that I had the same problem and using a chinese baseband (China RT 0.26.0_1.11.0) solved it. I also said that a week ago I installed CM7 RC 1.5 and I had wifi issues (dc and rc a lot) but installing the nigthly version fixed it.
Greetings, cranky german friend
I managed to make it work with the brazilian claro baseband, but had to manually set the APNs again. Now my Defy is working just fine. Info on how to configure the APNs for peruvians using CM7 is found in the peruvian Ideas Claro site. Just google 4 it, is self explanatory, but if anyone has trouble finding it, I'll be happy to post all here.
Thanks 4 the lights!
Help
Hello guys, I'm from mexico and I have a Lumia 900 with CLaro from Perú. My problem is I want to use it here in Mexico but the phone keeps asking me for a code. It says I should ask my operatior (Claro) but I don't think they want to give it to someone from Mexico. Any ideas? Can anyone find out the code or know something?
So I got this phone after new years, and when I got home I decided to unlock the bootloader because I wanted to root it. Long story **** I found the process too complicated (Unlike how I did it years ago for my previous xperia phone) so I gave up. Now my phone says something about phone is unlocked every time I turn it on and that's that.
I seem to be unable to get latest android update for my phone, I looked at the sony website and used my IMEI number and it says I should be able to install oreo on my device, but there are no updates on my device.
What must I do in order to get the oreo update for my phone? At this point I don't care for rooting my device so any help is extremely appreciated.
Thanks in advance
Phone XA1 Plus
G3423 International
Build number : 48.0.A.1.99
sirxazor said:
So I got this phone after new years, and when I got home I decided to unlock the bootloader because I wanted to root it. Long story **** I found the process too complicated (Unlike how I did it years ago for my previous xperia phone) so I gave up. Now my phone says something about phone is unlocked every time I turn it on and that's that.
I seem to be unable to get latest android update for my phone, I looked at the sony website and used my IMEI number and it says I should be able to install oreo on my device, but there are no updates on my device.
What must I do in order to get the oreo update for my phone? At this point I don't care for rooting my device so any help is extremely appreciated.
Thanks in advance
Phone XA1 Plus
G3423 International
Build number : 48.0.A.1.99
Click to expand...
Click to collapse
Hola amigo, yo acabo de desbloquear el bootloader de mi xperia xa1 plus G3423 es facil desde la pagina de sony pides un código con tu numero de imei luego en flashtool colocas el código y en par de segundos desbloqueas bootloader, con la herramienta xperifirm descargas el firmware que desees según tu modelo y luego con flashtool haces el .ftf y lo quemas.
Con todo eso listo te queda el teléfono como nuevo ! en xperifirm esta la versión android oreo
Hola amigo, que bueno encontré alguien que habka español.
Tengo una duda sobre el abrir el bootloader, resulta que tengo igual el Xa1 plus y quiero abrir el bootloader pero no si si al hacerlo y perder las drmkeys se pierda calidad en cámara o las mejoras de imágen o si de alguna forma empeora el equipo al abrir el bootloader, tú que ya lo abriste no taste algo de eso o algún otro problema,?? Agradecería tu consejo
Does anyone know if anyone has found a way or know any way to root the Samsung ONE UI onto a moto g10 or any android phone in general?
No ni lo intentes ya que podrias dañar el Celular. Los firmware de Samsung son bien compatibles casi con cualquier Celular, pero cuando utilizas el Telefono veras que presenta muchos problemas, como los msm que los enreda todos asi con los contactos y con las redes sociales. Te lo digo por experiencia propia.
MANUCORVIN said:
No ni lo intentes ya que podrias dañar el Celular. Los firmware de Samsung son bien compatibles casi con cualquier Celular, pero cuando utilizas el Telefono veras que presenta muchos problemas, como los msm que los enreda todos asi con los contactos y con las redes sociales. Te lo digo por experiencia propia.
Click to expand...
Click to collapse
Do you suggest any other android ui that could work? I mean I know there’s launcher but they don’t have all the features or maybe I’ve not found one that is the best.
I really liked the Samsung ui and features but after being a long time Samsung user and their phones lagging and freezing up so much after a short while I decided to not try buy another one from them. Because their phone never lasted for me.
Hola, soy de México, compré un Galaxy note 10 plus (n975u1) es americano, al parecer Verizon, lo uso con la empresa Telcel. Mi señal es muy débil, en exteriores es buena pero en interiores es mala. ¿Existe una solución para el software de desbloqueo de banda? ¿O es un problema de antena?
Thanks for reading my question and I hope you can help me
Translated by GT:
Hello, I am from Mexico, I bought a Galaxy note 10 plus (n975u1) it is American, apparently Verizon, I use it with the Telcel company. My signal is very weak, outdoors it is good but indoors it is bad. Is there a solution for band unlock software? Or is it an antenna problem?
Thanks for reading my question and I hope you can help me
Hello! I'm sorry to say that there is no solution, it all depends on the modem that your phone has, for example I have an s10 + U1 and it works very well but, on rare occasions I have signal losses, until I restart. (I also use telcel).
NOTE: install firmware XAA is the most free and has more compatibility files for other companies.
chalofito said:
¡Hola! Lamento decirte que no hay solución, todo depende del modem que tenga tu teléfono, por ejemplo tengo un s10 + U1 y funciona muy bien pero, en raras ocasiones tengo pérdidas de señal, hasta que reinicio. (También uso telcel).
NOTA: instalar firmware XAA es el más gratuito y tiene más archivos de compatibilidad para otras empresas
Click to expand...
Click to collapse
chalofito said:
¡Hola! Lamento decirte que no hay solución, todo depende del modem que tenga tu teléfono, por ejemplo tengo un s10 + U1 y funciona muy bien pero, en raras ocasiones tengo pérdidas de señal, hasta que reinicio. (También uso telcel).
NOTA: instalar firmware XAA es el más gratuito y tiene más archivos de compatibilidad para otras empresas.
Click to expand...
Click to collapse
Graciasthanks that's the version I have, I had an update and the reception a little better