dear freinds
I have been given a XDA2 that is dead ,but can enter only usb mode.
So i tried to download 02 UK FINAL 172181-final
but gave 'country error ' 0.0.111
so i downloaded himaupgreadeeut.exe
but when i try to upgrade it says
'
Error 103 rom image not found.
please can someone advise what to do or how to fix.
Thanks
Martin
OK i have manged to update this by putting the hacked version into same folder and have done a successfull rom upgrade and starts up as I MATE
But handset resets itself after 5 minutes.
i have again tried to update to the 02 UK FINAL and now it says
country error N -8-1-1-1
PLEASE help
use different upgrader
hi thee are two himaupgraders one is himaupgrateut and the other is himaupgradeut_noid this doesnt need country code etc
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Hi,
I updated with success few time ROM usually Duttys 1.7 - 1.8 , i have installed HardSPL 1.4 Olinex yesterday i tried flash Duttys 1.9 its stop on 53 % and show flash error 262 IU 634 after that time i cannot flash any rom the stop on 58 84 % like TOR, PANOSHA, Please help !
Best Regards
Muzzzik77
This is error 262:
Q: During the upgrade, the progress bar is moving. If the error message (ERROR [262] :UPDATE ERROR) appears, what should I do?
A: This may occur when the connection is lost, without power supply, computer host is down, or due to other unexpected cases. You will see that there’s still one progress bar displayed on the device but it is not moving any more. The device cannot get into the Wince screen, so you cannot connect with ActiveSync. This problem usually can be recovered. You just need to follow the instructions in the error message box, reset the device, and run RUU again. RUU will re-flash the whole image again.
Note: You should remove the battery and reset the Mobile Device.
What you can do is reset the device with volume down key pressed. You will enter the bootloader. Check that at the bottom of the screen it says USB and not SERIAL.
If so, unplug the USB cable till it shows USB. Then flash it again. Maybe you should flash a stock HTC ROM first.
Good luck...
Muzzik77 said:
Hi,
I updated with success few time ROM usually Duttys 1.7 - 1.8 , i have installed HardSPL 1.4 Olinex yesterday i tried flash Duttys 1.9 its stop on 53 % and show flash error 262 IU 634 after that time i cannot flash any rom the stop on 58 84 % like TOR, PANOSHA, Please help !
Best Regards
Muzzzik77
Click to expand...
Click to collapse
try to flash an original rom signed like:
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
and remove the cover from the back of your device and keep it cooled with something(a vent or something)
is probbably that you have a power management issue on you device
if you got warranty u should take it to the shop with an original rom
i had the same ..
I used Hardspl a few weeks ago.
After 3 retry´s to flash the new WM6.5 HTC ROM,
i installed Hardspl relocker and rebooted it...
It came up like you bought it.. like a fresh install ...
after all the settigns i tried to flash the new rom again and.... bingo
where can i find the hardspl relocker??
Hi everybody;
I'm trying to update my HTC DIAMOND.Everything seems ok.Activesync detects my phone.
Image version 1.35.456.3 to i.93.479.3KRM
Then phone goes to BOOT mode;
SPL : 1.35.0000
Then i can see progress bar on phone LCD but it takes few moments and i get "UPDATE ERROR" and it takes me to RECOVERY page.
As mentioned in "READ ME" file:
This error occurs during the CE ROM code upgrade process.
I soft reset and restart RUU but the same thing happens.I changed USB cable and tried on another PC but the same
PLZ help.
I'm using activesync version 4.5
Install Hard SLP!
i had the same problem..
the solution for me was to upgrade the hard spl
so try to use the last version
CU
thanks,i'll try and post result.
Good morning everybody,
I had yesterday a great review of many posts and threads about flashing and I did it before, but now I have some problems and I hope you can help me.
With mtty 1.42 I have deleted all datas from my device (HTC TD1) and after that my device is in bootload. There is because of deleting no ROM installed. In the bootload it is displayed that HSPL is installed and when I connect my device to my PC the status from serial to USB switchs, so my device is successfully conntected to my PC.
When I start flashing the original HTC ROM (this is an exe data), in some cases the flashing does not start and the error 260 and 264 occur or the flashing display appears and it stopps flashing at 0 % with the error code 262 Update error.
What do I wrong? Is it possible to flash only from the bootload with no ROM on the device?
Thanks for your help!
Cheers, Daniel