I bought a Diamond which is locked by my Carrier AirTel. I flashed HardSPL Developers edition and then the TLR 2 ROM. After which the phone is stuck in Airplane mode when I try to switch it off Bluetooth and WiFi turn on automatically?
The phone has become very slow and it takes 3mins for TouchFlo 3d to startup also after sometime I receive a gwes.exe crash error and the phone freezes.
How can I fix my bricked phone?
Update: I have tried Hard Resetting and flashing other ROM's, including the factory ASIA ROM's available here. But sadly nothing works, I get the same problems and the same slow speeds
Update 2: I just happened to read HELP!! Diamond cannot connect to network seems like this guy is facing the same problem. Can anyone provide me the AirTel factory ROM?
Question: Can a sim unlock solution solve this problem permanently?
working on solution
and no indian diamonds have a different radio
what happens if u remove the sim n boot? does the phone run properly? (in airplane mode of course)
yes important dont flash with roms if you have an indian diamond
http://rapidshare.com/files/126887587/indian_ship_rom.rar
indian ship for u
maybe a incompatible rilphone.dll in your windows directory
Follow these rules (if the previous one doesn't fix the job):
Soft reset
hard reset
flash ROM
flash radio
hardSPL
Related
Can anyone help i recently had my phone crash its an xda exec by the way and nothing worked i did hard reset and when it loaded on the boot screen where it normally gives u all details it says no gsm and has d 1.30.68.wwe on the phone loads and works as a palm pad but nothing else works i did a rom upgrade but can only update the two software ware roms the radio rom wont upgrade has anybody had this fault and how can i cure it
Hi,
I have samsung I600 with WM5. I was triying to update it to WM6 (AT&T) beta Rom - evrey thing was going ok. Howeever, accedently I removed the devise from the usb cable before the update process completed.
After that i tried to power up my phone which shows me AT&T logo and aftre that AT&T (Good Buy) logo and power off immediatly.
I tried to turn off the phone again and put it in reflashing mode which says (*USB Downloader - Xcingular v1.2, [phone] Active off) and connect it again to the computer but it does not define it at all. I tried also, to hard reset the devise but without any results.
Is there away to bring my mobile to the live again???
No Accident
Hi Man,
You flashed your phone with the AT&T ROM ... and you are not on the AT&T network. This ROM detects the SIM and if it is not AT&T it will shutdown immediately.
Also the flash software is different; so you are completely stuck ...let me know if you find a solution for this.
Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!
Hi guys .
I had my HOX over to service because it shut down and i couldn't open it.
They fixed it but now the phone hard resets itself.
It crashes , restarts alone remains at htc logo loop,then when i power it off and power it on again it hard resets and starts the starting guide with gmail wifi etc.and i loose everything.
Any ideeas what can i do about this ?
PS:I don't want to go to that service again.
I have 4.2.2 with sens 5 android Official and no root.
Software nr is : 4.18.771.4
I know how to root and install a custom rom but don't want to do that.In the last case i will do that .
there is not much you can do...
It might me a hardware problem.
If its a software problem installing a custom rom or RUU would solve the problem.
There is really nothing else you could do.
Ether bring it to a service (the same or a different one), or try a custom rom and RUU.
Dear friends,
Please read all this with patients, 10 days i rooted my phone, its succesfully done, aftr that by mistake i installed 3D CHAINFIRE . My phone stucked with booting, i flashed my phone with s9111b_mp_f2f3f5f8_b1_in_mmx_14_ my phone got booted and first problem is INVALID IMEI. I got solution with In Engineering mode and re installed my IMEI. And my main problem is in my mobile i am not able use in WCDMA only. when i select wcdma only mode my network will show no service.i used wcdma only mode in same sim with same mobile before flash. im in bangalore and i m using Aircel 3G even i try with Airtel 3G too same problem,, and i desided to flash with other rom and i flashed with s9111b_mp_f2f3f5f8_b1_in_mmx_16. again same IMEI problem and resolved it and now same i am not able use my internet praporly.. even EDGE signel also not working correct.. so please every one please HELP ME to find out solution,, AND I GOT NVRAM error too in wifi.
Regards