Hi,
I have samsung I600 with WM5. I was triying to update it to WM6 (AT&T) beta Rom - evrey thing was going ok. Howeever, accedently I removed the devise from the usb cable before the update process completed.
After that i tried to power up my phone which shows me AT&T logo and aftre that AT&T (Good Buy) logo and power off immediatly.
I tried to turn off the phone again and put it in reflashing mode which says (*USB Downloader - Xcingular v1.2, [phone] Active off) and connect it again to the computer but it does not define it at all. I tried also, to hard reset the devise but without any results.
Is there away to bring my mobile to the live again???
No Accident
Hi Man,
You flashed your phone with the AT&T ROM ... and you are not on the AT&T network. This ROM detects the SIM and if it is not AT&T it will shutdown immediately.
Also the flash software is different; so you are completely stuck ...let me know if you find a solution for this.
Related
First of all, sorry about my english. I flashed with Odin latest firmware and my phone stoped working. I flash like 8 different firmwares but with the same result:
-My bluetooth is not working. When I switch it on, it just won’t start.
-S-Note app won't work.
-After a while when the screen shut down. I can’t get it back on. I have to remove the baterry,
-My phone USB to PC connection was not detected even though I’ve installed usb driver and while in download mode Odin can detect it.
I flashed perseus kernel but stilll nothing.
I can send sms and call,wifi is working but I want a fully functional phone.
I really don't know what to do. Please help me!
No SDS
Hi guys, I need a little help from a good soul
I'm from Brazil, and my father have a Samsung Galaxy Grand Duos, I thought was that, so without a reseacrh in the internet, I've try to get SUPERUSER on his phone, and when I tryed to update from Odin, the cellphone is stuck on boot logo samsung.
Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware, and ether the Samsung KYES, to make a emergency recovery.
So somebody know how I can recovery the cellphone?
After a 2 days looking in the internet, I discovery something about the phone, isn't Samsung Grand Duos, the boot logo says Samsung Galaxy NEO
have the codename: GT-I9060 ... and I don't founded nothing here about this phone.
Anyway, somebody can help me to unbrick this phonel? Its very like a Grand Duos, but is Samsung Galaxy NEO with Dual SIM.
Please, help me to unbrick! the old man want to kill me! hehehehe thx!
cya!
hi! you say (Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware)
this seems computer problem i think. Check if the drivers is ok at device manger on your computer and try to install the correct drivers for adb conection.
grsaridhtc said:
hi! you say (Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware)
this seems computer problem i think. Check if the drivers is ok at device manger on your computer and try to install the correct drivers for adb conection.
Click to expand...
Click to collapse
Hi, i've did all u say...
But still stuck..
Only I can see is the brand model name: Samsung Galaxy Neo and on the LEFT TOP of the screen have an symbol. RED EXCLAMATION !
And do nothing,
Only thing I can do is, enter in odin mode (power + vol down + home) after (vol up) ...
Appear
Odin Mode
Produto Name: GT-I9060
Current BIN: Custom
System Status Custom
I've downloaded the Odin 3.09 too, this odin recognize and allow me to send new firmware, but I did and nothing happen, still stucked.
Now I'll try download de original firmware from Samsfirmware and try send through odin again croos my fingers
Do you know what more else I can try?
Thx!
As the title said, idk what happend so my s4 mini, i will explain you what it happened.
i went to school normaly as every day, with the airplane mode and energy saving on. I went back home and then I turned them off and the google play services stoped, then snapchat, whatsapp and everything else. I couldnt use any app, so i restart my phone, it turned off but it didn't turn on anymore. now the problem is that i can't turn my phone on and I didn't do anything. so i read that maybe flashing a new .pit or the stock rom again, so i connnected my device via usb (only download mode works) and odin detects it, i putted the stock rom + the .pit but when odin starts, it stucks at SetupConnection or Initialization.
I tried with another usb port, cable and with another pc but the problem still there.
Please help :crying:
What windows were you using? And did you disable anti virus when using Odin?
Hello Everyone,
This is my first thread on this forum, which i am making because I ran out of options, and don't know what to do....
My Samsung Galaxy S4 mini(GT-I9192) were shut down automatically when i am using it.After then I started my phone again
it starts normally but after the details Samsung Galaxy S4 mini(GT-I9192)comes and it again turn off and again restarts and
this process is going again and again.As I tell you my phone doesn't stuck on a boot as my phone restarts again before the samsung logo comes.
I've tried Emergency firmware upgrade and Initialization through kies but after entering model no. and S/N,
It says 'GT-I9192' does not support initialization. I've done that before with kies it never gives that error I don't know why now.
After That I tried to install stock firmware by Odin in download mode, The process gets completed pass message comes after that my phone reboots in recovery mode and a message print on the bottom "did not match size '/system/csc/common/system/csc/others.xml' (no data available)" i don't know what is that for and after that i reboot my phone and still same thing...
After all that I think maybe its an hardware issue but if it is an hardware issue then how my phone starts and again shutdown so i don't think it's an hardware issue btw i don't know what it is.
So Please If anyone Have any Solution please help me.
Thank You
I have same problem on my galaxy s4 mini gt-i9195 LTE.
first the phone doesnt wanna turn on at all, just show as QHSUSB_DLOAD
after xx hours googling for solution i try unbrick.img which bring the screen back in live:good:
then i try several roms but the phone reject the flash, so i try flash with original stock rom, that went successful
but that doesnt change something, still keep rebooting, even when load recovery it get reboot and keep rebooting.
I don't think that this might be a hardware issue, but something wrong with the android partitions.
I'll keep playing with it hope i find some solution.
If someone read this and has same or similar issue, please post what you have try so far, so we can work on it and find the problem.:highfive:
Thanks for your reply...
As my phone were start after flashing so many times and now it says Device Memory Corrupted Please reset your device to default
settings and there is a reset tab which doesn't working when i keep pressing that so now i think that maybe my eMMC chip was damaged well exactly i don't know that yet....
well for you just try connecting through kies and do a firmware upgrade and if that doesn't working than flash it through odin and also download PIT file for re-partition....
Hi everyone! First i'd like to apologize for any english mistakes, since i'm brazillian! Here's the thing... Recently, i`ve updated my LG G3 with a 6.0 Marshmallow rom (from lg-roms website), and after some tests, i've decided to go back to 5.0 Lollipop. But here's the problem: when i tried to load the new room via lg flash tool, i get some errors, saying that my phone is not connected (just when i'm in the download mode). When i try to flash with the phone on, the lg flash tool recognizes him, begins the installation and reboots the fone to the download mode, but when the download mode initializes, the software shows the same message (that he is not connected). Also, i`ve tried to root the phone with kingroot (a bunch of versions) and i never get succesful. Can anyone help me with a solution so i can go back to 5.0?
Thank you gustavorossy for your post,
Same problem here. In addition, to make the phone recognize the pluged usb, I have to :
1- turn it off
2- plug the usb cable
3- turn it on with the cable pluged
Otherwise, if I turn it on without the cable pluged, or if it reboots during utilization, the phone don't detect the charger nor the PC or any other connection, till I follow the steps above. So it makes it impossible to go stock for exemple.
Except it, everything is working well and I tried to install various custom ROMs none of them fixed the problem.
Thanks a lot for any help.