After Flashing my Phone Data connection Not working properly!!!! :( :( - Micromax Canvas 4 A210

Dear friends,
Please read all this with patients, 10 days i rooted my phone, its succesfully done, aftr that by mistake i installed 3D CHAINFIRE . My phone stucked with booting, i flashed my phone with s9111b_mp_f2f3f5f8_b1_in_mmx_14_ my phone got booted and first problem is INVALID IMEI. I got solution with In Engineering mode and re installed my IMEI. And my main problem is in my mobile i am not able use in WCDMA only. when i select wcdma only mode my network will show no service.i used wcdma only mode in same sim with same mobile before flash. im in bangalore and i m using Aircel 3G even i try with Airtel 3G too same problem,, and i desided to flash with other rom and i flashed with s9111b_mp_f2f3f5f8_b1_in_mmx_16. again same IMEI problem and resolved it and now same i am not able use my internet praporly.. even EDGE signel also not working correct.. so please every one please HELP ME to find out solution,, AND I GOT NVRAM error too in wifi.
Regards

Related

Diamond stuck in Airplane mode?? Please help

I bought a Diamond which is locked by my Carrier AirTel. I flashed HardSPL Developers edition and then the TLR 2 ROM. After which the phone is stuck in Airplane mode when I try to switch it off Bluetooth and WiFi turn on automatically?
The phone has become very slow and it takes 3mins for TouchFlo 3d to startup also after sometime I receive a gwes.exe crash error and the phone freezes.
How can I fix my bricked phone?
Update: I have tried Hard Resetting and flashing other ROM's, including the factory ASIA ROM's available here. But sadly nothing works, I get the same problems and the same slow speeds
Update 2: I just happened to read HELP!! Diamond cannot connect to network seems like this guy is facing the same problem. Can anyone provide me the AirTel factory ROM?
Question: Can a sim unlock solution solve this problem permanently?
working on solution
and no indian diamonds have a different radio
what happens if u remove the sim n boot? does the phone run properly? (in airplane mode of course)
yes important dont flash with roms if you have an indian diamond
http://rapidshare.com/files/126887587/indian_ship_rom.rar
indian ship for u
maybe a incompatible rilphone.dll in your windows directory
Follow these rules (if the previous one doesn't fix the job):
Soft reset
hard reset
flash ROM
flash radio
hardSPL

my canvas 4 stuck at booting logo plz help

Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
thank you.
007jigar said:
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
Click to expand...
Click to collapse
thank you so much, now its working I tried with new driver, so its done
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
chejetikoti said:
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
Click to expand...
Click to collapse
if you using stock rom...then take hard reset your phone...reinsert your sim.
I did hard reset and removed and inserted sim again, but still I am facing same problem. every time when I do hard Reset My mobile IMEI Numbers are Going to INVALID... why?
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
yeh i am doing this always when do hard reset
007jigar said:
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
Click to expand...
Click to collapse
I am doing this every time,, but after that only I am getting the WCDMA only not working problem, if I select network ball will crossed, no network for it, I checked the same sim in other mobile its working properly
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
007jigar said:
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
Click to expand...
Click to collapse
IMEI NUMBERS installing is successful I will try again to flash my phone again may ne it will work properly
installation aborted status 7
Plzz help me out guyzzz I tried to install this rom but it was showing error as installation aborted status 7
Now my phone is stuck on the logo plzz help me wat to do
Micromax q334
I face same problem on my micromax q334 please send driver link for my phone urgent.

"No Service" Note 3 won't connect to network. HELP!!

Hello guys. Recently my note 3 just stopped having service out of nowhere. when i insert my SIM into any other phone it works perfectly. Ive tried going into the network settings and registering onto the T-Mobile network but i always get an error saying that it cant connect to the network. ive tried flashing back to stock but that does not help. Someone please HELP?!
I have the same problem. You are not alone.
You buy the phone used? Could be a blocked IMEI

Please hel Struck on activation screen unable to activate my lg g4 due to wifi issue

help needed i am unable to activate my lg g4 it is not going past select wifi and there is no wifi showing please help
Note: phone is out of warranty and imported from usa to use at my network so unable to return please watch the below videos this is the exact problem i am facing
https://www.youtube.com/watch?v=J_ulSOveIUY
This happened to me once! I just did a factory reset to clean up my phone and ran into the problem you have. To fix it I had to download flash a stock .kdz or .tut with LG Flash Tool and it let me connect to wifi. Are you familiar with flashing stock firmware?

LG G3 D852- Sim network not found. Phone will restart

Hi, guys I have virgin canada LG G3- D852 just over year old and since few days it keeps saying "Sim network not found. Phone will restart"
My phone then restarts, sim is found ,it works normally for 10mins and then again I get same message and phone reboots again.
Remedies I've tried so far:
1.Deleted cache
2. Factory reset done
3. Removed sim ,cleaned area and reinserted into sim area.
So far all the above steps I've tried have failed, what should I do now, this is getting really frustrating!
Please help!
Phone is running on android 6.0
Check sim pins, they may not touch cim card at all!

Categories

Resources