Help!!!!!! - Upgrading, Modifying and Unlocking

Can anyone help i recently had my phone crash its an xda exec by the way and nothing worked i did hard reset and when it loaded on the boot screen where it normally gives u all details it says no gsm and has d 1.30.68.wwe on the phone loads and works as a palm pad but nothing else works i did a rom upgrade but can only update the two software ware roms the radio rom wont upgrade has anybody had this fault and how can i cure it

Related

Need help ! cingular 8125 bricked :(

Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!

Diamond stuck in Airplane mode?? Please help

I bought a Diamond which is locked by my Carrier AirTel. I flashed HardSPL Developers edition and then the TLR 2 ROM. After which the phone is stuck in Airplane mode when I try to switch it off Bluetooth and WiFi turn on automatically?
The phone has become very slow and it takes 3mins for TouchFlo 3d to startup also after sometime I receive a gwes.exe crash error and the phone freezes.
How can I fix my bricked phone?
Update: I have tried Hard Resetting and flashing other ROM's, including the factory ASIA ROM's available here. But sadly nothing works, I get the same problems and the same slow speeds
Update 2: I just happened to read HELP!! Diamond cannot connect to network seems like this guy is facing the same problem. Can anyone provide me the AirTel factory ROM?
Question: Can a sim unlock solution solve this problem permanently?
working on solution
and no indian diamonds have a different radio
what happens if u remove the sim n boot? does the phone run properly? (in airplane mode of course)
yes important dont flash with roms if you have an indian diamond
http://rapidshare.com/files/126887587/indian_ship_rom.rar
indian ship for u
maybe a incompatible rilphone.dll in your windows directory
Follow these rules (if the previous one doesn't fix the job):
Soft reset
hard reset
flash ROM
flash radio
hardSPL

[Q] Need Urgent Help

Hi
SuperNoob here
i had a factory unlocked defy with 2.1
i managed to root it, but one fine evening it kept getting stuck on motorola icon
i did the factory reset/wipeout from the motorola recovery screen
after reboot the phone started, google account signs in then signs out itself, and motoblur cannot complete account setup, the red registration bar gets stuck in the end, i guess i cant create motoblur account from UAE (etisalat carrier)
how can i get my sweet moto back to normal? is there a way to flash 2.1 or even 2.2 from motorola recovery screen? how can i fix things?
PLEASE HELP ME OUT
ps. donno if this will help but this is device info i had earlier saved from rds lite
Technology: UMTS
Software Version: JRDNEM_U3_2.54.0EPU93ST2_U_03.0A.01
Flex Version: UCAJRDNEMARAB1B80AA030.0R
Bootloader Version: 0910
DRM Version: N/A
been trying to search and read more and more
i now know how to boot into bootloader which is 09.10 for my defy but while there and connecting the usb cable, drivers are loaded, and rsd lite does recognize the device. However it is not highlighting START when i point it to the stock 2.2 UAE rom i downloaded from http://forum.xda-developers.com/showthread.php?t=1122210
i donno what to do
help me polease
HOW TO BLOODY activate defy with or without motoblur account from Dubai?
since i posted i dint stop searching and reading
fount the correct stock froyo 2.2.2 and flashed with rds
the solution was so simple in the end, learnt a great deal today
PROBLEM SOLVED

[Q] HOX hard resets itself.

Hi guys .
I had my HOX over to service because it shut down and i couldn't open it.
They fixed it but now the phone hard resets itself.
It crashes , restarts alone remains at htc logo loop,then when i power it off and power it on again it hard resets and starts the starting guide with gmail wifi etc.and i loose everything.
Any ideeas what can i do about this ?
PS:I don't want to go to that service again.
I have 4.2.2 with sens 5 android Official and no root.
Software nr is : 4.18.771.4
I know how to root and install a custom rom but don't want to do that.In the last case i will do that .
there is not much you can do...
It might me a hardware problem.
If its a software problem installing a custom rom or RUU would solve the problem.
There is really nothing else you could do.
Ether bring it to a service (the same or a different one), or try a custom rom and RUU.

[Q] gt-s7560m Bootloader

so i recently got this phone (gt-s7560m) in canada but now im in germany and rooted the phone but then a samsung update downloaded and now when it boots it starts with the trend logo then for a second the original. also my wifi on cyanogen doesnt work nor on the stock rogers rom it gets stuck on "Turning on..." i have to use another stock rom from australia ive tried flashing with odin new firmware. also the newest TWRP V2.7.1.0 doesnt show any kind of storage i have to use V2.6.5.0. I think the bootloader was replaced with the trend bootloader but i have no clue of what to do. Any help?
Yo90bosses said:
so i recently got this phone (gt-s7560m) in canada but now im in germany and rooted the phone but then a samsung update downloaded and now when it boots it starts with the trend logo then for a second the original. also my wifi on cyanogen doesnt work nor on the stock rogers rom it gets stuck on "Turning on..." i have to use another stock rom from australia ive tried flashing with odin new firmware. also the newest TWRP V2.7.1.0 doesnt show any kind of storage i have to use V2.6.5.0. I think the bootloader was replaced with the trend bootloader but i have no clue of what to do. Any help?
Click to expand...
Click to collapse
Ok ; ill try to help you but give me a few days to find the thinks that i need
rubend447 said:
Ok ; ill try to help you but give me a few days to find the thinks that i need
Click to expand...
Click to collapse
did you find any fixes or did you give up?
Yo90bosses said:
did you find any fixes or did you give up?
Click to expand...
Click to collapse
more or kess i know something ti try ; you cand do the same byt with something for your phone ; like a rom i think that if you use a temporal recovery and flas a rom for your phone you could change the boot again to your phone
or use odin volume down + home + power an full reinstal your phone fireware (i think that you should try this first)
also; did you tryed to flas clockworkmod recovery based?
if you need something or more help contact me (sorry for the time that i need to this response ;I just started my studyes and i havn't got ennought time for all )

Categories

Resources