New radio rom 1.80.00 found in buzzdev.net
http://buzzdev.net/component/option.../id,245/chk,f591b2e6d03ade7ce6681bbbc7563b3a/
have fun
RE
Anybody tried it? Does it solves the bluetooth disconnection problem?
Thanks
Radio 1.08.00
Radio 1.08.00 seems to be for the Himalaya?
yep ! definetely for a himalaya !
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Melty said:
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Click to expand...
Click to collapse
Please let us know, so we could possible proceed as well.
im 88% through flashing, figured wtf 1.06 can go on again
Okay, I've done the upgrade and when I did a soft-reset my machine said
Radio 1.08.00
Protocol 42.41.P8
And I have connected to my wireless network at home and have successfully browsed to the bbc.co.uk homepage, so WiFi works.
I haven't put a SIM in my device yet (still using my old phone).
Why do you guys think it's for the Himalaya?
well it seems to work a treat chaps,
wifi connectec quicker im sure, not long enough for a thorough check but its working!!!
oops i forgot to remove the sd and sim, ahhwell, flashed first time, phew
Okay guys, here's what I've found so far:
WiFi works - connected to my home network and browsed
Bluetooth works - ran TomTom and got a fix
Phone works - Made a few phone calls.
AND... When I rang the Exec it indicated an incoming call the INSTANT I got a dial tone on the house phone and there was no delay before we could hear each other!
This looks like the real deal!
im sure this thing is running alot smoother aswell, so far 1.08 on the Universal is a green light, i dunno where this hymilaya thing has come from, but on buzz's site its in the universal section
Yeah I agree Carnivor. It looks very promising so far and all of the functions appear to work at least as well as before.
Just been syncing successfully with Exchange over WiFi.
Obviously if it starts crashing we'll report back, but nothing bad so far!
About wifi, did you have the need to turn on twice to connect, and is it solved with this radio? Ie: Some universal user can turn on wifi the first time, but if you turn it off (using the pocket pc menu, not by turning off the power), and you turn on again, it won't connect. You would have to turn off then on to connect.
i upgraded to my Jasjar and all went alright until I reset at the end and it want boot past the blue i-mate screen, I have even hard reset and still nothing.
Any help please.....
Or does anyone know how to put old radio or Rom on as it will not boot up so I can't use activesync
Please any help
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
seal said:
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
Click to expand...
Click to collapse
Just reset the device normally and plug in the USB cable.
ActiveSync won't connect, but it will be connected to your PC. Just run the T-Mobile ROM Update program then and everything should be fine
If you still want to upgrade to Radio ROM 1.08.00, then try the tutorial I wrote here:
http://forum.xda-developers.com/viewtopic.php?t=40986
Just follow all the steps for the radio ROM, and in the end throw away the non-radio ROM files before flashing
I'm using this method right now on my Dutch T-Mobile MDA Pro as I also had trouble with the NoID tool
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
seal said:
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
Click to expand...
Click to collapse
Err, sorry, my bad
I thought you had a T-Mobile logo in your name
No, if you have an I-Mate, use an original I-Mate ROM instead of the T-Mobile one
EDIT:
Actual feedback on this Radio ROM:
the GPRS refused to log in, somehow, although I'm not quite sure this is a problem with the ROM. I'll downgrade to 1.06.00 later and see if the problem persists.
Everything else seems to work just fine
Upgrade Radio 1.08.00
I just upgraded my Universal (OS: TMo 1.20.34) with Radio 1.08.
Everything running like a charm.
Cheers
hrb
I got a X01HT and it has been flashed to WM6 by the seller. However, I have some issues with it.
1) everytime I soft reboot it, it will stuck at the green windows mobile interface and not going thru into my 'desktop'...but I can tell that the phone has ready since the GSM signal flashes. but the screen freezes up at the green greeting page...I have to stab the reset hole for more than 15 times and it can finally get into my desktop... pls help me with the boot up issues...it is quite annoying
2) last time my X01HT looks as usual, but the phone function lost without any clue...no calls in and out but all functions are working well. I sware the flight mode is shut off...how this happened ?
3) I can access to the wifi connection in my office and remote control my computer...BUT, I cannot browse any of the web pages on the device thru the IE or other browsers...any suggestions ?
Thank you so much for your help. New to this device.
no one could kindly lend me a hand ?
What error do you get when trying to load a web page in IE?
no error msg...it keeps searching...searching and searching...
maybe you have an old buggy version of wm6 on your device. try to flash a new release and see what happens. if you still have the problems, it may be a hardware problem.
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
I have tried a lot of times and read a lot, I have also updated actvesync from 4.2 to 4.5, but still the same.
Thanks,
Without disconnecting run USPL again and see if it helps. If not reset your device and look and see what the SPL version is. If it is 1.11.0000 then it has worked and you can flash the new ROM.
I had the same problem with my P3300 and I found a solution under Windows Vista on this forum (you can find the link in the wiki xda)
http://www.forummobiles.com/index.php?showtopic=139079&st=0&p=1399080&#entry1399080
The only thing, is that's in french...
Maybe you will find some equivalent thing under XP. The tip is to upgrade the driver of the mobile device once USPL is loaded 100%.
I hope this will help.
planagan said:
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
Click to expand...
Click to collapse
Seems perfectly normal to me... I think you are not patient enough. It can take quite some time, whatever you do, don't disconnect the usb cable, sit on your hands and watch the phone resets itself. After that a new ActiveSync connection is made, then you can start with the ROM update.
It can also help to disable your AntiVirus and firewall software temporarily, during the flash sequence.
Had this problem too. killed the firewall what worked for me!
Had this problem too. If you are trying to install a cooked ROM run first "clear storage" program (settings/system)
Hello all,
I have got a Unlocked BT ToGo (S620) And is now changed to O2 SIM. But when I start it up, it shows the BT Setup window. If i go through the setup, it fails and the setup is not finished. This will happen everytime I turn it on. Is there anyway to make the BT Setup stop showing on startup?
Ill try to put up anymore additional information for you.
Thanks.
It's still got the BT software on it so will show that stupid pesky thing that even on BT you'd get stuck on.
Read the sticky hard-reset is what you want all will be default.
Or another option flash a custom ROM so you can have an upgrade to 6.1/6.5.
Did a hard reset. Took off that pesky BT setup thing. Thanks alot!
Cool glad you sorted happy to help.
Hey there,
I am having the following problem and I hope that someone on this lovely Board will be able to help me solve it.
I have updated my Arc s to ICS yesterday. The Flashing Process worked very well, thanks to the Guide on the Board. After the last Reboot of my Phone I was greeted with the new Start Animation Logo and the Guide to Customize some Options, including Wifi settings. I skipped it. When the Process was finished, I went to the Settings Memu to Setup my Wifi on my Device, entered the Password (no Typos, Triple-Checked), touched Connect and....it shows "Authentification Problem". Every Time I try to connect. Before the Update everything was working perfectly nornal.
Then I went to look through the Board, found a Theread were a Fix was offered. I downloaded it to my PC. Now for the Tricky part:
As I have mentioned, I don`t have a Wifi Connection with my Phone. So, how do I Install .apk files onto my Phone? I neither have Bluetooh on my PC, nor do I have a File Manager installed in my Phone.
Thanks in advance
Jack
There can be problems with .70 baseband. Try flashing .66 baseband with flashtool.
sinkster©